DC-SP6531EXD Explosion-proof IR Mini dome camera·Instruction Manual
4
4. Service condition requirements
Please do not focus the camera to hard light (such as lamp or sunlight), which
will cause too bright of the image, it’s not malfunction but it does will affect the
duration of the CCD (or CMOS).
Transport, operate and store this product in applicable temperature and
humidity range. Do not locate it in wet, overheated (over +60ºC), extreme cold
(less than -40ºC) environment or area with strong electromagnetic radiation or
unstable lighting conditions.
The product shall be protected from any entry of water or other conductive fluid,
which may damage the internal electrical element.
Avoid overheated, the product shall be well ventilated.
Avoid damage caused by compressing or violent vibration in transmission,
storage or operation.
The product shall be well packaged as new product or equivalent in
transmission.
We suggest using this product with Lightning Protection Devices.
Internal and external grounding shall be reliable and the cross-sectional area
shall be no less than 4mm2.
5. Operation & maintenance requirements
Do not dismantle this product; there is no user serviceable part inside.
Do not touch the CCD (or COMS) directly; a proper way is to blow away the
dust with a blower on the lens. If it is necessary to clean it, use soft cloth with a
little alcohol to wipe the lens gently. Replace the cover when not use to protect
the CCD (or COMS).
Soft, dry cloth can be used for camera body cleaning. For dirt not easy to clean,
some neutral detergent can be used, clear the dirt away then dry the camera
body. Corrosive agent, abrasive cleaner cannot be used for camera cleaning,
they may damage the surface or even decrease the service performance.
This product shall be installed and repaired by authorized
personnel, please do not dismantle or repair it by yourself. Only manufacturer
indicated components / accessories can be used when replacement is
necessary.
The CCD (or COMS) may be damaged by laser beam, it’s better to avoid the
camera suffering radiation of laser beam.
