IEI Technology IMBA-Q471 Manuale utente

ATX Motherboard Supports 10th/11th Gen. LGA1200 Intel® Core™

i9/i7/i5/i3, Celeron® and Pentium® Processors, DDR4, Triple

Independent Displays, Triple 2.5GbE, M.2, USB 3.2, SATA 6Gb/s,

HD Audio and RoHS

IMBA-Q471

Quick Installation Guide

Version 1.0

January 21, 2022

Package List

IMBA-Q471 package includes the following items:

1 x IMBA-Q471 single board computer

2 x SATA cable

1 x I/O shielding

1 x QIG

Specifications

CPU:

10th/11th Generation LGA1200 Intel® Core™ i9/i7/i5/i3, Celeron®

and Pentium® processors

Chipset:

Intel® Q470

Memory:

Four 288-pin 2933 MHz dual-channel unbuffered DDR4 SDRAM

DIMM slots supporting up to 128 GB memory

BIOS:

AMI UEFI BIOS

Graphics Engine:

Up to Intel® UHD Graphics 630; Intel® HD Graphics Gen 9

Engines with 16 low-power execution units, supporting DX2015,

OpenGL 5.x, OpenCL2.x and ES 2.0

Display Output:

Triple independent display

1 x VGA (up to 1920 x 1080 @ 60 Hz)

1 x DP (up to 4096 x 2304 @ 60 Hz)

1 x HDMI (up to 4096 x 2304 @ 30 Hz)

Ethernet:

LAN1: Intel® I225V 2.5GbE controller

LAN2: Intel® I225V 2.5GbE controller

LAN3: Intel® I225V 2.5GbE controller

External I/O Interface:

1 x RS-232 DB-9

2 x USB 2.0 (Type-A)

2 x USB 3.2 Gen 1 (5Gb/s) (Type-A)

2 x USB 3.2 Gen 2 (10Gb/s) (Type-A)

Internal I/O Interface:

6 x USB 2.0 (2x4 pin, p=2.54)

2 x USB 3.2 Gen1 (2x10 pin, p=2.0)

2 x RS-232 (2x5 pin, p=2.54)

1 x RS-422/485 (1x4 pin, p=2.0)

5 x SATA 6Gb/s (RAID 0/1/5/10 supported)

Audio:

Realtek ALC888S HD Audio codec supports 7.1-channel

3 x Audio jack (line-in, line-out, mic-in) on rear I/O

1 x Front audio (2x5 pin, p=2.54)

Front Panel:

1 x Front panel (2x7 pin, p=2.54; power LED, HDD LED, speaker,

power button, reset button)

LAN LED:

2 x LAN LED (1x2 pin, p=2.0)

Expansions:

2 x PCIe x16 slot (x8 signal)

3 x PCIe x4 slot

2 x PCIe x1 slot

1 x M.2 M-key 2242/2280 (PCIe x2, SATA)

Digital I/O:

1 x 12-bit digital I/O (2x7 pin, p=2.0)

SMBus:

1 x SMBus (1x4 pin, p=1.25)

I2C:

1 x I2C (1x4 pin, p=1.25)

Fan Connector:

1 x CPU fan connector (1x4 pin)

2 x System fan connector (1x3 pin)

Power Supply:

ATX/AT power supply

Support AT/ATX mode

ErP/EuP compliant

Power Consumption:

[email protected], [email protected], [email protected], [email protected]

(Intel® Core™ i5-10500TE CPU with four 8 GB 2933 MHz DDR4

DIMMs)

Watchdog Timer:

Software programmable support 1–255 sec. system reset

Operation Temperature: -20°C –60°C

Storage Temperature: -30°C –70°C

Operation Humidity: 5% –95%, non-condensing

Dimensions: 244 mm x 305 mm

Weight: GW:1200 g / NW:700 g

Safety: CE/FCC compliant

All the drivers and utility for the IMBA-

Q471 are available on IEI Resource

Download Center. Type IMBA-Q471

and press Enter to find all the relevant

software, utilities, and documentation.

To install software from the

downloaded ISO file, mount the file as

a virtual drive to view its content.

IEI Resource Download Center

https://download.ieiworld.com

Ordering Information

IMBA-Q471-R10:

ATX Motherboard Supports 10th/11th Gen. LGA1200 Intel® Core™

i9/i7/i5/i3, Celeron® and Pentium® Processors, DDR4, Triple

Independent Display, Triple 2.5GbE, M.2, USB 3.2, SATA 6Gb/s,

HD Audio and RoHS

19800-003100-100-RS:

Dual port USB cable with bracket, 30mm, p=2.54

19800-010500-200-RS:

USB 3.0 /USB 3.2 cable, 450mm with bracket, p=2.0

32102-000100-200-RS:

SATA power cable, MOLEX 8981-4M to SATA15P, 150mm

32205-000702-200-RS:

RS-232 cable, 230mm, p=2.54

CF-115XA-R10:

High performance LGA1155/1156 cooler kit, 1U chassis compatible,

73W

CF-1156C-R20:

LGA1155/LGA1156 cooler kit, 1U chassis compatible, 45W

CF-1156D-R30:

LGA1155/LGA1156 cooler kit, 1U chassis compatible, 65W

CF-115XE-R10:

High-performance LGA1155/1156 cooler kit, 95W

Jumpers Setting and Connectors

LABEL

FUNCTION

J_ATX_AT1

AT/ATX power mode setting

ME_RTC2

Clear CMOS jumper

ME_RTC1

Clear ME jumper

J_FLASH1

Flash descriptor security override jumper

AUDIO1

Internal audio connector

ATX1

ATX power connector

CPU12V1

ATX CPU 12V power connector

DBG_PORT1

Debug connector

DIO1

Digital I/O connector

DEBUG_SPI1

EC debug connector

EC_UART1

EC UART debug connector

CPU_FAN1, SYS_FAN1,

SYS_FAN2

Fan connectors

F_PANEL1

Front panel connector

I2C1

I2C connector

LED_LAN1

LAN1 link LED connector

LED_LAN2

LAN2 link LED connector

LED_LAN3

LAN3 link LED connector

COM2

RS-422/485 serial port connector

COM3, COM4

RS-232 serial port connectors

S_ATA1, S_ATA2,

S_ATA3, S_ATA4, S_ATA5

SATA 6Gb/s connectors

SMB1

SMBus connector

JSPI1

Flash SPI ROM connector

JEC1

Flash EC ROM connector

ATXPWR2

PCIe power connector

JUSB4, JUSB5, JUSB6

Internal USB 2.0 connectors

JUSB3-1

Internal USB 3.2 Gen 1 connector

M2_M1

M.2 M-key slot

PCIE1, PCIE2

PCIe x1 slots

PCIEX4_1, PCIEX4_2,

PCIEX4_3

PCIe x4 slots

PCIEX8_1, PCIEX8_2

PCIe x16 slots (x8 signal)

PWR_SW1

Onboard power button

AUDIO_CV1

External HD Audio jack

JP1

External dual 2.5GbE RJ-45 connector

CON1_USB1

External dual USB 3.2 Gen 1 and

dual USB 3.2 Gen 2 connector

LAN3_USB2

External 2.5GbE RJ-45 and dual USB 2.0

combo connector

COM1/VGA1

External RS-232 and VGA combo connector

HDMI_DP1

External HDMI and DP++ combo connector

J_ATX_AT1: AT/ATX Power Mode Setting

PIN NO.

DESCRIPTION

Short 1 - 2

ATX Power Mode (default)

Short 2 - 3

AT Power Mode

ME_RTC2: Clear CMOS Jumper

PIN NO.

DESCRIPTION

Open (default)

Keep CMOS Setup

(Normal Operation)

Short

Clear CMOS Setup

ME_RTC1: Clear ME Jumper

PIN NO.

DESCRIPTION

Open

Keep RTC (default)

Short

Clear RTC

J_FLASH1: Flash Descriptor Security Override Jumper

PIN NO.

DESCRIPTION

Short 1-2

Disabled (default)

Short 2-3

Enabled

USB Power SW: USB Power Setting

USB Power SW

DESCRIPTION

+5V DUAL

Power is provided in S3/S4 sleep

state (default)

+5V

Power is not provided in S3/S4

sleep state

Use the USB Power SW1 and USB Power SW2 BIOS options to configure

whether to provide power to the corresponding USB connector(s) when the

system is in S3/S4 sleep state. This option is valid only when the above Power

Saving Function (ERP) BIOS option is disabled.

- USB Power SW1 for CON1_USB1 and LAN3_USB2 connectors

- USB Power SW2 for JUSB4, JUSB5, JUSB6 and JUSB3-1 connectors

AUDIO1 : Internal Audio Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

LMIC2-L

AUD_GND

LMIC2-R

PRESENCE#

LLINE2-R

MIC2-JD

FRONT-IO

LLINE2-L

LINE2-JD

ATX1: ATX Power Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

+3.3V

-12V

GND

+5V

PS_ON

GND

+5V

GND

Power good

-5V

5VSB

+5V

+12V

+5V

+12V

+5V

+3.3V

GND

CPU12V1: ATX CPU 12V Power Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

+12V

GND

+12V

GND

+12V

GND

+12V

DBG_PORT1: Debug Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

+5V

SMCLK1_EC

SMDAT1_EC

GND

PLTRST_N

DIO1 : Digital Input/Output Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

VCC

Output 5

Output 4

Output 3

Output 2

Output 1

Output 0

Input 5

Input 4

Input 3

Input 2

Input 1

Input 0

DEBUG_SPI1: EC Debug Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

EDICS

EDICLK

EDIDI

EDIDO

EC_UART1: EC UART Debug Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

UART_TX

VCC3.3

UART_RX

GND

CPU_FAN1: CPU Fan Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

+12V

FANIO

PWM

SYS_FAN1: System Fan Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

FANIO

PWM

GND

SYS_FAN2: System Fan Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

+12V

GND

F_PANEL1: Front Panel Connector

DESCRIPTION

PWR

LED

PWR_LED+

BEEP_PWR

SPKR

PWR_LED-

PWR

BTN

PWR_BTN+

PC_BEEP

PWR_BTN-

HDD

LED

HDD_LED+

Reset+

RESET

HDD_LED-

Reset-

I2C1: I2C Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

I2C_CLK

I2C_DATA

+5V

Indice

Altri manuali IEI Technology Hardware per computer

IEI Technology

IEI Technology PM-US15W Manuale utente

IEI Technology

IEI Technology KINO-SE-i2 Manuale utente

IEI Technology

IEI Technology HPE-4S1 Manuale utente

IEI Technology

IEI Technology PCISA-9652 Manuale utente

IEI Technology

IEI Technology WSB-H610 Manuale utente

IEI Technology

IEI Technology Mustang-V100-MX4 Manuale utente

IEI Technology

IEI Technology SPCIE-C2260-i2 Manuale utente

IEI Technology

IEI Technology WSB-H610-R11 Manuale utente

IEI Technology

IEI Technology NANO-LX Manuale utente

IEI Technology

IEI Technology ICE-QM770 Manuale utente

IEI Technology

IEI Technology TANK-XM811 Manuale utente

IEI Technology

IEI Technology PCIE-G41A2 Manuale utente

IEI Technology

IEI Technology PCIE-H610 Manuale utente

IEI Technology

IEI Technology WAFER-ULT4 Manuale utente

IEI Technology

IEI Technology PICOe-EHL-J6412C Manuale utente

IEI Technology

IEI Technology PCISA-LX Manuale utente

IEI Technology

IEI Technology NOVA-7830 Manuale utente

IEI Technology

IEI Technology KINO-ABT-i2 Series Manuale utente

IEI Technology

IEI Technology ECN-680A-H61 Manuale utente

IEI Technology

IEI Technology TANK-600 Series Manuale utente

IEI Technology

IEI Technology SPE-4S-R10 Manuale utente

IEI Technology

IEI Technology PCISA-BT Manuale utente

IEI Technology

IEI Technology PPC2-C ADL Series Manuale utente

IEI Technology

IEI Technology HPE-6S1 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente