IEI Technology SPCIE-C2260 Manuale utente

Full-size PICMG 1.3 CPU card supports LGA1150 Intel® Xeon® E3/

Core™ i3/Pentium® and Celeron® per Intel® C226, DDR3,

VGA, IDP, Dual Intel® PCIe GbE, SATA 6Gb/s, mSATA,

mini PCIe, RS-232, HD Audio, iRIS-2400 and RoHS

SPCIE-C2260-i2

Quick Installation Guide

Version 1.0

Nov. 13, 2015.

Package List

SPCIE-C2260-i2 package includes the following items:

1 x SPCIE-C2260-i2 single board computer

1 x Dual RS-232 cable

2 x SATA cable

1 x USB cable

1 x Utility CD

1 x QIG (Quick Installation Guide)

Specifications

CPU:

LGA1150 Intel® Xeon® E3/Core™ i3/Pentium® or Celeron®

processor supported

PCH:

Intel® C226

Memory:

Four 240-pin 1600/1333MHz dual-channel DDR3 & DDR3L

SDRAM ECC and non-ECC unbuffered DIMMs support up to

32GB

BIOS: UEFI BIOS

Graphic Engine:

Intel® HD Graphics Gen 7.5 support for DX11.1 and OpenCL

1.2, OpenGL 3.2 Full MPEG2, VC1, AVC Decode

Display Output:

VGA (Up to 1920x1200 @ 60 Hz)

iDP interface for HDMI, LVDS,VGA, DVI, DP

(Up to 3840x2160 @60 Hz)

Ethernet:

LAN1: Intel® I217LM Clarkville-V with Intel® iAMT 9.0 support

LAN2: Intel® I210 PCIe controller

Super IO: Fintek F81866

EC:

IWDD

Digital I/O:

8-bit digital I/O (4-bit input / 4-bit output)

Audio: Supports by IEI AC-KIT-892HD audio kit

I/O Interface:

4 x RS-232

1 x RS-422/485

1 x LPT

1 x 6-pin wafer for KB/MS

1 x mSATA (colay SATA port 6)

6 x SATA 6GB/s (RAID 0, 1, 5, 10 supported)

8 x USB 2.0 (4 by pin header, 4 by backplane pin header)

4 x USB 3.0 (2 on rear IO, 4 by pin header)

Watchdog Timer:

Software programmable support 1~255 sec. system reset

FAN:

1 x 4-pin CPU fan connector

1 x 3-pin system fan connector

Front Panel:

1 x Front Panel

(Power LED, HDD LED, Speaker, Power Button, Reset Button)

LAN LED:

2 x 2 Pin for LAN1 LED, LAN2 LED (Active)

TPM:

1 x 20-pin (2x10) header

SMBus:

1 x 4-pin (1x4) wafer

I2C:

1 x 4-pin (1x4) wafer

IR:

1 x 5-pin (1x5) header

IPMI:

1 x DDR3 SO-DIMM slot supports iRIS-2400

Expansion:

PCIe signal and PCI signal via golden finger

PCI signal by ITE 8892 (PCIe to PCI bridge)

1 x mini PCIe slot supports PCIe x 1, USB devices and mSATA

Power supply:

5V/12V, AT/ATX support

Power Consumption:

[email protected], [email protected]7A, [email protected]A, [email protected],

[email protected]A

(3.4GHz Intel® CPU with four GB 1333MHz DDR3 memory)

Operation Temperature:

-20°C ~ 60°C

Operation Humidity: 5% ~ 95%, non-condensing

Dimensions: 338mm x 126mm

Weight GW/NW: 1200g / 420g

Ordering Information

SPCIE-C2260-i2-R10:

Full-size PICMG 1.3 CPU card supports LGA1150 Intel® Xeon®

E3/Core™ i3/Pentium® and Celeron per Intel® C226, DDR3,

VGA, IDP, Dual Intel® PCIe GbE, SATA 6Gb/s, mSATA, RS-232,

mini PCIe, HD Audio, iRIS-2400 and RoHS

32200-074800-RS: RS-422/485 cable, 200mm

19800-010500-100-RS: USB 3.0 cable with bracket

19800-000075-RS: KB/MS cable with bracket

SAIDE-KIT01-R10: SATA to IDE/CF converter board

32102-000100-200-RS:

SATA power cable, MOLEX 5264-4P to SATA15P

19800-000049-RS: LPT Cable

AC-KIT-892HD-R10:

7.1 channel HD Audio kit with Realtek ALC892 support dual

audio streams

CF-1150SA-R10: Special cooler kit for LGA1150, High-performance

compatible, 95W

CF-1150SB-R10: Special cooler kit for LGA1150, High-performance

compatible, 65W

CF-1150SC-R10:

Special cooler kit for LGA1150, 1U chassis compatible, 65W

DP-DVI-R10:

DisplayPort to DVI-D converter board (For iEi IDP connector)

DP-HDMI-R10:

DisplayPort to HDMI converter board (For iEi IDP connector)

DP-LVDS-R10:

DisplayPort to LVDS converter board (For iEi IDP connector)

DP-VGA-R10:

DisplayPort to VGA converter board (For iEi IDP connector)

DP-DP-R10:

DisplayPort to DisplayPort converter board (For iEi IDP connector)

Jumpers setting and connectors

LABEL FUNCTION

J_ATX_AT1 AT/ATX mode select switch

J_CMOS1 Clear CMOS button

PCIE x16 Power PCIEX16 channel mode setting

USB SW1, USB SW2 USB power setting

MSATA_SW1 M-SATA switch auto-detect

J_FLASH1 Flash descriptor security override

J_AUDIO1 Audio source connector

BAT1 Battery connector

CHASSIS1 Chassis status connector

CPU_FAN1 CPU fan connector

CPU12V1 +12V power connector

CHA_DIMM1, CHA_DIMM2

CHB_DIMM1, CHB_DIMM2

DDR3 DIMM slots

DIO1 Digital I/O connector

DP1 Display port connector

CN3 EC debug connector

F_PANEL1 Front panel connector

IPMI1 Collocation IPMI module (iRIS-2400)

IR1 IrDA Infrared Interface Connector

CN1 I2C Connector

KB_MS1 Keyboard and mouse connector

LED_LAN1 LAN1 link LED connector

LED_LAN2 LAN2 link LED connector

LPT1 Parallel port connector

CN4 M-SATA card connector

COM1, COM3, COM4, COM5

RS-232 serial port connector

COM2 RS-422/485 serial port connector

SATA1, SATA2, SATA3

SATA4, SATA5, SATA6 SATA 6Gb/s drive connectors

CN2 SMBUS connector

SPDIF1 SPDIF connector

JSPI1 Flash SPI ROM connector

JSPI2 Flash EC ROM connector

SYS_FAN1 System fan connector

TPM1 TPM connector

USB1, USB2 Internal USB 2.0 connectors

CN7 Internal USB 3.0 connector

LAN1, LAN2 RJ45 LAN connectors

CN5, CN6 External USB 3.0 ports

VIDEO1 VGA connector

J_CMOS1: Clear CMOS button

PIN NO. DESCRIPTION

NC (default)

Keep CMOS Setup

(Normal Operation)

Press button Clear CMOS Setup

J_ATX_AT1: AT/ATX mode select switch

PIN NO. DESCRIPTION

Short 1 - 2 ATX Mode (default)

Short 2 - 3 AT Mode

USB SW1, USB SW2: USB power setting

PCIE x16 DESCRIPTION

+5V DUAL 5V DUAL (default)

+5V +5V

Chipset

Auto Power Button Status [Disabled(ATX)]

Restore AC Power Loss [Last State]

> PCI Express Configuration

> PCI Azalia Configuration

Power Saving Function(ERP) [Disabled]

PCIEX16 Power [1 x16 PCIE]

USB SW1 [+5V DUAL]

USB SW2 [+5V DUAL]

------------------

PCIE x16 Power: PCIEX16 channel mode setting

PCIE x16 DESCRIPTION

1 x16 PCIE 1 x16 PCIE (default)

2 x8 PCIE 2 x8 PCIE

1 x8 , 2x4 PCIE 1 x8 , 2x4 PCIE

Chipset

Auto Power Button Status [Disabled(ATX)]

Restore AC Power Loss [Last State]

> PCI Express Configuration

> PCI Azalia Configuration

Power Saving Function(ERP) [Disabled]

PCIEX16 Power [1 x16 PCIE]

USB SW1 [+5V DUAL]

USB SW2 [+5V DUAL]

------------------

CHASSIS1: Chassis status connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 +3.3VSB 2 CHASSIS OPEN

J_AUDIO1: Audio source connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

HDA_SYNC

HDA_BIT_CLK

HDA_SDOUT

HDA_SPKR

HDA_SDIN

HDA_RST#

HDA_VCC

HDA_GND

HDA_+12V

HDA_GND

BAT1: Battery connector

PIN NO. DESCRIPTION

1 VBATT 2 GND

J_FLASH1: Flash descriptor security override

PIN NO. DESCRIPTION

Short 1 - 2 Disabled (default)

Short 2 - 3 Enabled

MSATA_SW1: M-SATA switch auto-detect

PIN NO. DESCRIPTION

Open Auto Detect M-SATA (default)

Short M-SATA Enable

CPU_FAN1: CPU fan connector

PIN NO. DESCRIPTION

GND

+12V

FANIO

PWM

DP1: Display port connector

PIN NO.

DESCRIPTION PIN NO.

DESCRIPTION

+5V

LANE1N

LANE1P

GND

LANE3N

LANE3P

GND

AUX_CTRL_DET_D

GND

HPD

AUXP

AUXN

GND

LANE2P

LANE2N

GND

LANE0P

LANE0N

+3.3V

CPU12V1: +12V power connector

PIN NO.

DESCRIPTION PIN NO.

DESCRIPTION

GND

+12V

DIO1: Digital I/O connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

GND

VCC

Output 3

Output 2

Output 1

Output 0

Input 3

Input 2

Input 1

Input 0

IR1: IrDA connector

PIN NO. DESCRIPTION

1 +V5S 2 NC

3 IR-RX 4 IR-RX

5 IR-TX

F_PANEL1: Front panel connector

DESCRIPTION PIN

DESCRIPTION

PWR

LED

+5V

BEEP_PWR SPKR

IPMI ID_LED+

IPMI LED

GND

IPMI ID_LED-

PWR

BTN

PWRBTN_SW#

PC_BEEP SPKR

GND

RESET

HDD

LED

+5V

EXTRST-

SATA_LED#

GND

CN3: EC debug connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

EC_EPP_STB#

EC_EPP_AFD#

EC_EPP_PD0

EC_EPP_PD1

EC_EPP_INIT#

EC_EPP_PD2

EC_EPP_SLIN#

EC_EPP_PD3

EC_EPP_PD4

EC_EPP_PD5

EC_EPP_BUSY

EC_EPP_PD6

EC_EPP_

KSI5

EC_EPP_PD7

EC_EPP_

KSI4

Indice

Altri manuali IEI Technology Hardware per computer

IEI Technology

IEI Technology PCISA-6612 Manuale utente

IEI Technology

IEI Technology HPE-8S0 Manuale utente

IEI Technology

IEI Technology WAFER-EHL Series Manuale utente

IEI Technology

IEI Technology WSB-9154 Manuale utente

IEI Technology

IEI Technology WAFER-ULT4 Manuale utente

IEI Technology

IEI Technology PCIE-G41A2 Manuale utente

IEI Technology

IEI Technology TANK-101B Manuale utente

IEI Technology

IEI Technology PCIE-H610 Manuale utente

IEI Technology

IEI Technology KINO-DH310 Manuale utente

IEI Technology

IEI Technology PPC2-C ADL Series Manuale utente

IEI Technology

IEI Technology HPE-8S0 Manuale utente

IEI Technology

IEI Technology HDC-304E Manuale utente

IEI Technology

IEI Technology ROCKY-4786EV Manuale utente

IEI Technology

IEI Technology SPCIE-C2160 Manuale utente

IEI Technology

IEI Technology WEB-6580 Manuale utente

IEI Technology

IEI Technology NANO-LX Manuale utente

IEI Technology

IEI Technology SPCIE-C2060 Manuale utente

IEI Technology

IEI Technology WAFER-945GSE3 Manuale utente

IEI Technology

IEI Technology PXE-9S2-R10 Manuale utente

IEI Technology

IEI Technology MPCIE-USB3 Manuale utente

IEI Technology

IEI Technology KINO-KBN-i2 Manuale utente

IEI Technology

IEI Technology WSB-9454 Manuale utente

IEI Technology

IEI Technology IEM-LX Manuale utente

IEI Technology

IEI Technology WAFER-PV-D5252 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente