IFM Electronic Efector100 GG507S Manuale utente

Operating instructions

(Ex protection related part) for inductive sensors

according to EU directive 94/9/EC Annex VIII (ATEX)

group II, equipment category 3D

IG514A

706343 / 00 02 / 2013

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

The requirements of the standards EN 60079-0 and EN 60079-31 are met.

• Marking (see unit or technical data sheet)

II 3D Ex tc IIIC T80°C Dc X IP67

• Permissible operating temperature of the application (proper usage):

Ta: -20°C...+60°C

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see "Marking" above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the respective national regulations and provisions as well as the relevant

installation regulations.

• Avoid electrostatic charging on plastic units and cables.

• To avoid electrostatic charging clean the unit with a damp cloth only. Rubbing with non-

conductive materials must be strictly avoided.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, protective housing, etc.).

• Do not mount the unit in the dust flow.

• Avoid dust deposits on the units.

• Protect the units and the cables efficiently against damage.

• For the connections and the electrical characteristics please see the unit marking or the

technical data sheet.

• Avoid direct radiation with high UV components (sunlight). Mount the unit in a protected

place.

• M12 plugs may only be opened or closed in a sufficiently clean environment.

• The secure fit of the impact protection housing for the sensor must be checked depending

on the installation conditions (temperature, vibration,...) and at intervals to be defined by

the operator.

Special conditions for safe operation

• The housing and housing parts made of plastic were tested with the supplied impact pro-

tection housing in accordance with EN 60079-0 for group II and for a low mechanical risk

with an impact energy of 4 joules.

• Use sockets which are suited for hazardous areas, e.g. ifm sockets EVC**A with Ex certifi-

cate (certificate number BVS 08 ATEX E 109 U).

• Protect the sockets by tightening the hexagon coupling nut sufficiently according to the

requirements of the Ex protection related operating instructions of the socket.

• Do not disconnect the connector while live.

• Apply a durable warning in suitable form close to the connector reading: „Do not separate

when energized“ or use the enclosed label if you can ensure a durable marking.

• The units must only be operated with the supplied impact protection housing for the

sensor.

►Screw the impact protection housing onto the sensor manually until the end stop.

►Screw the lock nut against the impact protection housing.

►Turn the nut against the impact protection housing until the latter also starts to turn. Use

an appropriate spanner.

Maintenance / Repair

The unit must not be modified nor can it be repaired. In case of a fault please contact the

manufacturer.

If required, the technical data sheets and EC declarations of conformity can be obtained

from the manufacturer. Indicate the article number.

Altri manuali per efector100 GG507S

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali IFM Electronic Accessori

IFM Electronic

IFM Electronic Efector 300 SM7050 Manuale utente

IFM Electronic

IFM Electronic efector180 IX5010 Manuale utente

IFM Electronic

IFM Electronic efector 200 OIH5 Series Manuale utente

IFM Electronic

IFM Electronic efector100 GG507S Manuale utente

IFM Electronic

IFM Electronic SM6000 Manuale utente

IFM Electronic

IFM Electronic efector 190 DTE820 Manuale utente

IFM Electronic

IFM Electronic efector200 OT Manuale utente

IFM Electronic

IFM Electronic O3M151 Manuale del proprietario

IFM Electronic

IFM Electronic efector100 ID503A Manuale utente

IFM Electronic

IFM Electronic LR8300 Manuale utente

IFM Electronic

IFM Electronic Efector 410 JN2100 Guida all'applicazione

IFM Electronic

IFM Electronic LK31xx Manuale utente

IFM Electronic

IFM Electronic efector 160 LK81 Series Manuale utente

IFM Electronic

IFM Electronic Efector 500 PL2058 Manuale utente

IFM Electronic

IFM Electronic efector 500 PB5 Series Manuale utente

IFM Electronic

IFM Electronic Efector 300 Manuale utente

IFM Electronic

IFM Electronic Efector 200 OI Series Manuale utente

IFM Electronic

IFM Electronic efector 250 O2D2 Series Manuale del proprietario

IFM Electronic

IFM Electronic SA 00 Series Manuale utente

IFM Electronic

IFM Electronic Efector 200 Manuale utente

IFM Electronic

IFM Electronic SB 4 Series Manuale utente

IFM Electronic

IFM Electronic PN5 series Manuale utente

IFM Electronic

IFM Electronic PB7 Manuale utente

IFM Electronic

IFM Electronic efector200 OGT3 Series Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente