Igloo ICE102-WHITE Manuale utente
Questions:1-800-968-9853
Model: ICE102-WHITE
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed, including
the following:
1. Read all instructions carefully.
2. DANGER! To protect against risk of electric shock, do not immerse
cord, plug or any parts of the unit in water or other liquids.
3. Close supervision is necessary when using this appliance near
children. This appliance is not suitable for use by children.
4. Never leave an appliance unattended while in use.
5. Do not place an appliance on or near a hot gas or electric burner, or
in a heated oven. Do not place on top of any other appliance.
6. Do not let the power cord of an appliance hang over the edge
of a table or countertop or touch any hot surface.
7. Do not operate any electrical appliance with a damaged cord
or plug or after the appliance malfunctions or has been dropped
or damaged in any manner. If damage is suspected, contact the
nearest authorized service centre for examination, repair or electrical
or mechanical adjustment.
8. Unplug from power outlet when not in use, before putting on or taking
off attachments, and before cleaning.
9. The use of accessory attachments that are not recommended by the
appliance manufacturer may cause fire, electric shock or injury.
10. Avoid contact with moving parts when the unit is in operation.
11. Never touch the cooling elements when the unit is in operation.
12. Do not use outdoors.
13. Do not use appliance for other than its intended use.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
English
1
English
2
Please read this manual carefully before using.
Retain it for your future reference.
WARNING
UNPACKING YOUR ICE MAKER
1. Inspect and remove all packing materials. This includes the foam and any
adhesive tape both inside and outside of the unit.
2. Inspect and remove any remains of packing, tape, or printed materials before
powering on your IGLOO appliance.
PRODUCT REGISTRATION
Thank you for purchasing this quality
IGLOO product.This easy-to-use
manual will guide you in getting the
best use out of your appliance.
Remember to record the model and
serial number. They are on a label in
back of the appliance.
__________________________
Model number
__________________________
Ice maker serial number
__________________________
Date of purchase
Staple your receipt to your manual.
You will need it to obtain warranty service.
Keep for your records to obtain Warranty Service
3
English
Electrical Requirements
Wiring and Grounding Instructions
This appliance must be plugged into at least a 15 AMP 110-115 VOLT 60 Hz
GROUNDED OUTLET. This appliance must be grounded. It is equipped with a 3-
wire cord having a grounding plug. The plug must be plugged into an outlet that
is properly installed and grounded.
WARNING! Improper use of grounded wire can result in the risk of electric
shock. Consult a electrician if necessary. Do not attempt to
defeat this safety feature by modifying the plug.
Avoid the use of an extension cord because it may overheat and cause a risk of
fire. However, if it is necessary to use an extension cord:
A. Use only 3-wire extension cords with a 3-blade grounding plug.
B. The marked rating of an extension cord must be be equal to or greater than
the rating of this appliance.
C. It should be positioned such that it does not drape over the counter or
tabletop where it can be pulled on by children intentionally.
SAFETY INSTRUCTIONS
Attempting any maintenance or cleaning:
To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect at the household distribution panel by removing the fuse or
switching off the circuit breaker before attempting any maintenance or cleaning.
NOTE: Disconnect power plug from the power outlet before maintenance or
cleaning
4
TABLE OF CONTENTS
English
Specifications Model # ICE102-WHITE
Electrical Shock Protection Class 1
Power 115V/60Hz 2.7 A
Ice Making Current 1.9 Amp
Ice Harvest Current 2.7Amp
Refrigerant R134a/2.3 Oz.
Design Pressure
High Side 290 Psig
Low Side 88 Psig
Dimensions 11.7" x 14.5" x 14.9"
Weight 26.4 lbs (12 kg).
Enclosure ABS plastic
Important Safeguards ............................................................ 1-2
Safety Instructions ......................................................................3
Parts and Accessories............................................................. 5-6
Operating Instructions................................................................7
Pre-Operating Instructions .................................................................7
Operating Instructions.......................................................................8
Operating Process............................................................................9
Cleaning and Maintenance......................................................10
Troubleshooting Guide.............................................................11
Warranty ...................................................................................12
5
English
1. Cover with transparent window
2. Ice maker and pusher
3. Water reservoir (Not shown)
4. Control panel
5. Water drain cap: for draining water from ice water
6. Compressor cooling fan (Do not block air flow)
7. Ice shovel
8. Ice basket
1
2
3
4
6
8
PARTS, FUNCTIONS AND FEATURES
5
7
6
English
Control Panel: Easy to use, button function with LED indicators
A. Power ON LED indicator light
B. Power ON/OFF button
C. Ice cube SELECT SIZE button
D. Selected ice size LED light indicator displaying: SMALL, MEDIUM,
and LARGE ice cubes to make
E. "ADD WATER" (Alerts that there is no water in the water reservoir), must
add water
F. "ICE FULL" LED indicator
a b c
A
B
D
E
F
Water Drain: Do not lose any parts. (Failure to put rubber plug back will cause
water to leak.)
A. Drain cap
B. Rubber plug
C. Drain spout
Drain water to store or when
appliance will not be used for
long periods
C
7
English
OPERATING INSTRUCTIONS
This portable ice maker uses a fully automatic control system, with an advanced
microcomputer for easy and convenient ice making. Making ice is simple and
fast. Just add water, plug into an outlet, and press the ON button. You can
select one of the three ice cube sizes with the touch of a button. When first
turning on the unit or during icemaking cycles, the compressor will stay idle for 3
minutes, while energizing.
There are warning indicators that alert you to fill water when the reservoir is
empty and to remove ice when the storage basket is full. The ice maker also has
built-in safeguards that can limit accidental damage, automatically shutting down
the system when necessary.
Pre-Operating Instructions
Please read carefully.
1. The tilted angle of the ice maker cabinet should not exceed 45˚
during transportation or use. Do not turn the appliance upside down.
Doing so could cause the compressor or refrigerating system to operate
incorrectly. When the ice maker is moved or transported, please allow time
for the fluids in the compressor to settle. Before using the ice maker for the first
time, please wait 2 hours after the unit has been leveled and positioned in its
proper place before plugging it in and turning it on.
2. Please ensure the ice maker is level and on a stable table or platform
to avoid malfunction.
3. The machine must be placed on a dry and level surface with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive
gases. Leave an 8" (20 cm) clearance on all sides of the ice maker for
proper ventilation.
4.
Do not fill the water reservoir with hot water. This may damage the ice maker.
It is best to fill the water reservoir with water of room temperature or lower.
8
Operating Instructions
1. Open the top cover, take out the ice storage basket and fill the water reservoir
with 0.8 gallons (3.2 L) of drinkable (tap, purified or bottled) water to the level
mark and replace the ice storage basket.
Make sure that the water level does not reach above the level mark or the
bottom of the ice storage basket. Close the top cover.
Note: During the operation process, if the level of water in the water reservoir
becomes too low, the machine will automatically stop operating and the
"Add Water" indicator will appear on the LED display.
2. Plug the unit into a grounded outlet. Push the ON / OFF button on the control
panel to turn on the machine.
3. Select the desired size of ice cubes by pressing the S, M, or L ice selector
button.
S = Small ice cubes (Approx. 7 minutes)
M = Medium ice cubes (Approx. 9 minutes)
L = Large ice cubes (Approx. 12 minutes)
The ice maker will start making ice soon after. The next cycle of 12 ice cubes
is complete (based on water temperature, ambient room temperature and
selected ice cube size).
Note: To stop the operation, press the ON/OFF button.
English
Lift ice basket to add water
9
English
Operating Process
1. Water is pumped from the water storage tank to the water box, which may
take up to 1 minute.
2. The icemaking cycle begins when the evaporator rods are dipped into the
water box. You will hear the compressor working.
3. It will take approximately 6-12 minutes for each icemaking cycle, depending
on the size selected. The larger the size, the more time is needed to make the
ice. After the cycle is finished, the water box will tilt forward and the
remaining water will flow back into the water storage tank. The evaporator
rods will then release the ice cubes.
Note: If the room ambient temperature is below 60˚ F(15ºC), then small or
medium ice cube sizes are suggested to prevent ice cubes from fusing
together.
4. Approximately 60 seconds later, the water box will tilt backwards and the ice
pusher will push the ice into the ice storage basket. After the water box flips
back to its original position, the next icemaking cycle will begin.
5. When the maximum capacity of ice cubes is collected and the ice reaches the
temperature sensor, the ice maker will automatically stop operating. The “ICE
FULL” LED indicator will light up.
If more ice is needed, remove the ice from the ice storage basket; then
replace the basket into the machine, making sure that the basket is placed
back to its original position. Note: When replacing the basket, ensure that the
temperature sensor is above the basket so that the machine operates properly.
6. To continue making ice, check that there is water in the water storage tank. If
there is no water in the water storage tank, then no water will be pumped into
the water box, and the operation will stop. The "Add Water" LED display will
light up. Press the “OFF” button. Fill the water storage tank with water, and
then press the “ON” button for the ice maker to begin operating again. Allow
the refrigerant inside the compressor at least 3 minutes to settle before
restarting.
7. If the compressor stops for any reason such as water shortage, too
much ice, power off, etc., do not restart the machine right away.
Wait at least 3 minutes before restarting the machine.
Indice
Lingue:
Altri manuali Igloo Macchina per il ghiaccio
