iHome iBT21 Manuale utente
instruction manual
Model: iBT21 -Revised
IB (English)
Size: 153mm x 120mm
Printing color: Black
Date : Dec 9, 2013 P1
iBT21
Bluetooth Wireless
Dual Alarm Clock
Update by Dec 9, 2013
iBT21
Introduction
Thank you for purchasing the iHome iBT21. This product is designed to provide high quality wireless
sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic
operation and care of the unit. Please read them carefully and keep for future reference.
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as benzene, thinner or similar materials can damage the surface of the unit.
P2
Maintenance
iBT21
P3
FCC ID: EMOIBT21
IC: 986B-IBT21
7*/* (
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
IC Statement
This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can
obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102
rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
FCC ID: EMOIBT21
IC: 986B-IBT21
iBT21
P4
Énoncé FCC
Déclaration de la FCC relative à l'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux radiations de la FCC RF fixées pour un environnement non
contrôlé.
7*/* (
• Avertissement : Tout changement ou modification apporté à cet appareil sans le consentement expresse de la partie responsable pour la
conformité peut annuler le droit de l'utilisateur d'utiliser cet appareil.
•REMARQUE : Cet équipement a été testé et jugé conforme aux limitations pour un appareil numérique de Classe B, selon la Section 15 de
la règlementation FCC.
Ces limites sont conçues pour offrir une protection raisonnable contre les interférences nocives d'une installation résidentielle. Cet équipement
génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé selon les instructions, peut causer des interférences nuisibles
aux communications radio.
Cependant, il n'y a aucune garantie qu'une interférence ne prendra pas place dans une installation particulière. Si cet équipement ne cause pas
d'interférence nocive à la réception de la radio ou du téléviseur, ce qui peut être déterminé en allumant et fermant l'équipement, l'utilisateur est
encouragé à tenter de corriger l'interférence en utilisant l'un ou l'autre des moyens suivants :
• Réorientez ou resituez l'antenne de réception.
• Augmentez la séparation entre l'équipement et le récepteur.
• Branchez l'équipement dans une prise d'un circuit différent que celui dans lequel est branché le récepteur.
• Consultez le marchand ou un technicien expérimenté en radio/téléviseur pour obtenir de l'aide.
CAN ICES-3 (B)/NMB-3(B)
Déclaration d'Industrie Canada (IC)
Cet appareil satisfait aux exigences d'Industrie Canada, prescrites dans le document RSS-210. Son fonctionnement est soumis aux deux
conditions suivantes : (1) l'appareil ne doit pas causer d'interférences, et (2) il doit accepter toute interférence, y compris celles risquant
d'engendrer un fonctionnement indésirable de l'appareil.
Cet appareil répond aux critères d'exemption des limites d'évaluation courante indiquées à la section 2.5 de la norme RSS 102 et de
conformité aux expositions aux radiofréquences de la norme RSS 102 ; les utilisateurs peuvent obtenir des informations sur l'exposition aux
radiofréquences et la conformité au Canada.
Cet appareil est conforme à la section 15 des règlements de la FCC, son utilisation est soumise aux deux conditions
suivantes : (1) Cet appareil ne doit pas causer d'interférences nuisibles et (2) cet appareil doit accepter toute interférence
reçue, y compris les interférences qui peuvent causer un mauvais fonctionnement.
iBT21
Table of Contents
Included/ Meet Your iBT21............................................................................................. 1-2
Installing Clock Backup Batteries .........................................................................................3
The Display/ Setting Up the Unit/ Turning the Unit ON and OFF..............................................4
Setting the Time................................................................................................................5
Setting the Alarms/ Reviewing, Arming and Disarming Alarms .................................................6
Resetting the Alarm to Come on the Next Day .......................................................................6
Snooze Operation/ Sure Alarm .........................................................................................7
Using Bluetooth: Pairing Your Device ....................................................................................8
Pairing with a Different Device/ Playing Audio Via Bluetooth/Remote Power On Via Bluetooth .......9
Playing Audio via Aux In..................................................................................................10
Sleep Operation/ Dimmer Operation/ USB Charging ..........................................................11
Consumer Product Safety Guide................................................................................... 12-13
Battery Cautions and Tips ................................................................................................14
Troubleshooting..............................................................................................................15
Warranty......................................................................................................................16
P5
iBT21
1
Included
• iBT21 Alarm Clock
• 100V-240V universal AC adaptor
• 2 AA batteries
• Stereo audio cable
P6
power
adaptor stereo
audio cable
alarm clock
2 AA batteries
iBT21
2
P7
Meet Your iBT21
Bluetooth/Pairing Button
Aux-in Jack
DC Jack
Clock Adj. Button
USB Charging Port
Back
Lower Volume Button
Raise Volume Button
Alarm 2 Button
Play/Pause Button
Alarm 1 Button
Sleep Button
Alarm Reset/Power Button
Snooze/Dimmer Button
Rev/– Setting Button
Fwd/+ Setting Button
Top
Mode Button (Bluetooth/AUX)
clock
adjust
alm. reset
LED Indicator
iBT21
Using the
3
P8
Replacing & Installing Clock Backup Batteries
The iBT21 uses 2 AA batteries (included) for backup to provide continuous alarm operation and clock
settings in the event of a power failure. If the backup batteries have been installed and a power failure
occurs or the AC adaptor is accidentally disconnected, the display backlight will not remain lit, but current
time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm
settings.
Note: You should replace backup batteries when the Battery Low Indicator appears on the display.
1. Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery
replacement.
2. Open backup battery compartment door located on the bottom
of the unit.
3. Insert two “AA” batteries, checking the + and – ends of the
batteries match the diagram inside the compartment. We
recommend to use alkaline battery for longer life. Do not mix
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
4. Close the compartment cover.
Note: Make sure you dispose of batteries properly (see your local
regulations).
Battery Low Indicator
The Battery Low Indicator is located at the top left of the display.
When it blinks it is time to replace backup batteries.
iBT21
Using the
4
P9
Setting Up the Unit
1. Connect the included AC adaptor to the DC jack located on the back
of the unit and connect the other end to a working wall outlet.
Turning the Unit ON and OFF*
1. Once the AC adaptor is properly connected, press the
Power Button located on top of the unit to turn the unit
ON. “ON” will appear briefly on the display and the LED
indictator will light up.
2. Press the Power Button to turn the unit OFF. The LED indicator
will turn off and “OFF” will appear briefly on the display.
NOTE: The unit has an automatic shut off function: if no audio is
detected for 3 minutes, the unit will power off.
The Display
Alarm 1 & Alarm 2 Indicators
Battery Low Indicator
Time Display
PM Indicator
Alarm time AM/PM Indicator
AUX indicator
Bluetooth Indicator
Sleep Indicator
Wake to Indicator
Alarm Time/Date Display
Year/Date Indicator
* see page 9 for details on
powering the unit ON remotely
using a paired Bluetooth device
clock
adjust
outlet
RESET
RESET
TEST
TEST
5V 2A
iBT21
Using the
5
P10
Setting the Time
1. Press and hold the Clock Adjust Button (located on the back of the unit) until the time flashes in the
display and a beep sounds.
2. Press and release the –or + Buttons to adjust the clock to the current time (hold to advance or reverse
rapidly). Make sure to set the correct AM/PM time. The PM indicator appears to the left of the time
display; there is no AM indicator.
3. Press and release the Clock Adjust Button. The year will flash on the display.
4. Press and release the –or + Buttons until the current year is displayed (hold to advance or reverse
rapidly).
5. Press and release the Clock Adjust Button again. The date will flash on the display.
6. Press and release the –or + Buttons until the current date is displayed (hold to advance or reverse
rapidly).
7. Press and release the Clock Adjust Button again to complete time setting. You will hear 2 beeps to
confirm time setting is complete.
NOTE: Press the or Button at any time during time setting to toggle between standard
12 hour display and 24 hour (”military”) display modes.
Indice
Altri manuali iHome Sveglia
iHome
iHome iBTW38N Manuale utente
iHome
iHome POWERVALET iW18 Manuale utente
iHome
iHome iBTW23 Manuale utente
iHome
iHome POWERCLOCK iBT235 Manuale utente
iHome
iHome HWL83 Manuale utente
iHome
iHome iBN18 Manuale utente
iHome
iHome iKN95 Manuale utente
iHome
iHome iBT22A Manuale utente
iHome
iHome IA63 Manuale utente
iHome
iHome iH33 Manuale utente
iHome
iHome POWERCLOCK IBT235W Manuale utente
iHome
iHome iWBT400 Manuale utente
iHome
iHome iKN105 Manuale utente
iHome
iHome iBTW38 Manuale utente
iHome
iHome IP16 Manuale utente
iHome
iHome IP43 Manuale utente
iHome
iHome iH120 Manuale utente
iHome
iHome iPL10 Manuale utente
iHome
iHome iH402 Manuale utente
iHome
iHome POWERCLOCK iBT235 Manuale utente
