iHome iHC5 Manuale utente
Model iHC5
The Home System
For Your Bluetooth Device®
Questions? Visit www.ihomeaudio.com
mode
alm reset
end
clear
iHC5IB-USAversion
Printcolor:Blacktextonwhitepaper
Sizeofmanual:178mmWx178mmH
Sept25,07
P1
end
alm. reset
snooze
1 2
3
4 5 6
7 8 9
0
iHC5
presets mode
Table of Contents
iHC5 Quick Start …………………………………………………………………………………………………………………………………… 1
Controls and Indicators ………………………………………………………………………………………………………………………………… 2
Setting Up and Using the iHC5 …………………………………………………………………………………………………………… 3-6
Replacing Clock Backup Battery ………………………………………………………………………………………………………………… 7
Replacing the Remote Control Battery …………………………………………………………………………………………………… 7
Remote Control ………………………………………………………………………………………………………………………………………… 8
A Consumer Guide to Product Safety ……………………………………………………………………………………………………… 9
Trouble Shooting ………………………………………………………………………………………………………………………………………… 10-13
Warranty ………………………………………………………………………………………………………………………………………………………… 14
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such
as Benzine, thinner or similar materials can damage the surface of the unit.
NOTE : The iHC5 is designed for use with Bluetooth wireless devices compatible with the HFP,
HSP, A2DP and AVRCP streaming audio profiles. Refer to your Bluetooth device’s user
manual or technical support to determine if your Bluetooth device supports these profiles.
P2
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits
provide reasonable protection against radio and TV interference in a residential area.
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference
you can try one or more of the following corrective measures:
•
Reorient or relocate the receiving antenna.
•
Increase the distance between the equipment and the radio or TV.
•
Use outlets on different electrical circuits for the equipment and the radio or TV.
Consult your dealer or an experienced radio/television technician if the problem still exists.
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s
warranty and void your FCC authorization to operate it.
To comply with FCC RF exposure requirement, this device and its antenna must not be co-located or operating in the
conjunction with any other antenna or transmitter.
This device complies with part 15 of the Federal Communications Commission Rules. Operation is
subject to the condition that this device does not cause harmful interference.
FCC Information
Getting Started
Thank you for purchasing the iHC5. Designed specifically to play Bluetooth audio wirelessly from your
mobile phone, computer or other device via Bluetooth (or with wires via line-in cord), this system provides
high quality audio performance that brings out the best in your music and lets you wake or sleep to it.
Please read this manual carefully before operating the iHC5 and keep it for future reference.
PACKAGE CONTENTS
2 audio patch cords
1 device cradle
1 remote control (1 CR2302 battery pre-installed)
1 iHC5 main unit (3 x 1.5V "AA" DC 4.5V alkaline batteries pre-installed)
1 AC adaptor
P3
1
iHC5 Quick Start
Attach AC adaptor cable to jack
on back of the iHC5 and plug
the other end into a wall socket
1: Power
RESET
RESET
TEST
TEST
2: Pair Your Bluetooth-enabled Phone With The iHC5
radio
mode
3: Making And
Answering Calls
h
e
l
l
o
o
o
o
10:09
Off
On
Select Back
10:09
Connectivity
Infrared
Packet data
Data transfer
Bluetooth
Select Back
AB
a) To dial, open the keypad on
front of the unit. Dial the number
then press the Talk Button.
b) To answer the phone, press
the Talk Button. Press the End
Button to end the call.
NOTE: If you have call waiting,
press the Talk Button to answer
a second call and place the first
on hold.
4: Setting the
Time Zone
Press the Mode button as
needed to select AM, FM1 or
FM2 band (or line-in). Press UP
or DOWN button to tune to
desired station. Press and hold
a preset button to set current
station as a preset.
Time is preset to Eastern Standard Time.
Press the Time Zone button until the display flashes.
Press UP or DOWN buttons to set your Time zone.
Press the Time Zone button again to confirm. To
adjust clock, press Clock Adjust button then UP or
DOWN button to set.
Press
and hold for 2 sec.
time zone
Press and hold Alarm 1 Button
until display flashes. Press UP
or DOWN button to set alarm
time. Press Play Button to wake
to Bluetooth phone, or Mode
Button to wake to radio. Set
alarm time with Alarm 2 Button
to wake to buzzer.
5: Setting Alarms 6: Radio/line-in
P4
a) Select Bluetooth/discover mode on your phone (see your user manual)
b) Press the Power button on the iHC5. The unit will enter Auto-pairing mode
and begin searching for a device to pair with, indicated by flashing
Bluetooth and pairing icons.
c) When prompted, enter pass code for iHC5 on your device: 1234
d) A screen (on phone) should confirm successful pairing.
2
Controls and Indicators
iHC5 Display
Time Zone Button
Alarm 1, Alarm 2 Indicators
Daylight Saving Time Indicator
Battery Low Indicator
Number/Text Display
Speaker Phone Indicator
Standby Mode Indicator Pairing Mode Indicator
Time Display
PM Indicator
Bluetooth Indicator
Sleep Display
Play/Pause Indicator
Sleep Button
Alarm Reset/Power Button/End button
Snooze/Dimmer Button
Alarm On/Off Button
Alarm 1 Button
Microphone
Alarm 2 Button
Play/Pause Button
(for Bluetooth music)
Alpha-Numeric Phone Keypad
Volume Up
Volume Down
Mode Button
(FM1, FM2, AM and line -in)
Radio Preset Button
AC Adaptor Jack
DST switch
Clock Adjust Button
External Mic Jack
Line-in Jack
Talk Button
Down Button
Up /Clear Button
Use cradle to rest/mount
your Bluetooth device.
Cradle will not charge devices
Cradle
P5
Using the iHC5
Connect iHC5 to Power Source
a) Plug the AC adaptor cable into the AC adaptor jack and the other end into a standard 120 VAC wall socket. Adaptor
must be plugged in to operate. The iHC5 does not operate on batteries.
Setting the Clock
a) Press and hold the Time Zone Button until the display flashes.
b) Press the Up or Down Button to select your time zone. The clock will display the current time in your time
zone.
c) Press the Time Zone Button again.
d) To adjust the time for Daylight Saving time, slide the DST switch to +1 to advance the time 1 hour.
Slide to -1 to turn the clock back 1 hour.
To Set Clock Manually
a) Press and hold the Clock Adj Button located on the back of the unit. The clock display will flash.
b) Press the Up or Down Button until the current time is displayed (a PM indicator appears when time is set to
PM; there is no AM indicator).
c) Press the Clock Adj Button to accept the time. The year display will flash.
d) Press the Up or Down Button to adjust the year and press the Clock Adjust Button. The date display will flash.
e) Press the Up or Down Button to adjust the date and press the Clock Adjust Button. Two beeps will indicate
clock setting is complete. Use the DST switch to adjust for Daylight Saving Time.
Using the Alarms
Setting the Alarms
a) Press and hold the Alarm 1 Button until the alarm time flashes to wake to Bluetooth device or radio or the
Alarm 2 Button to wake to buzzer at a separate alarm time.
b) Press the Up or Down Button to set the alarm time (a PM indicator appears when time is set to PM; there
is no AM indicator).
c) To wake to radio, press the Mode Button to select your radio band, then press Up or Down Button to
tune to the desired station or press P1 to P4 for a preset station.
d) To wake to Bluetooth device, press the Play/Pause Button .
Note: Bluetooth device audio mode must be playing and Bluetooth device must be charging in order to wake to
Bluetooth device. Depending on the Bluetooth device you are using, iHC5 may not be able to make your Bluetooth
device play. If this occurs, the buzzer alarm will sound instead.
e) Press the Alarm 1 Button again (or the Alarm 2 button if you are setting second alarm). Alarm is now armed,
indicated by the numbered alarm clock icon (Alarm 1 for Bluetooth or radio and Alarm 2 for buzzer).
Reviewing, Arming and Disarming Alarms (Turn Alarm Function On and Off)
a) Press and Alarm 1 (or Alarm 2 ) Button once. The iHC5 will show the current alarm time for alarm time review.
b) Press the Alarm On/Off Button to arm or disarm the alarms. When an alarm is armed, the related alarm icon
appears in the display.
3
P6
4
Using the iHC5
Resetting the Alarm to Come on the Next Day
a) When the alarm is sounding, press the Alarm Reset/Power/End Button to stop the alarm and reset it to come
on the following day.
Snooze
a) Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again
about 9 minutes later. Snooze can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The iHC5 has a sure alarm feature. If the backup batteries are installed, the buzzer alarm will still sound in the event
of a power failure.
Listening to Radio
Setting up the Antennas
a) An internal AM antenna is built into the unit; rotate the unit as needed for best AM reception.
b) Extend the wire FM antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
a) Press the Mode Button to select AM, FM1 or FM2 radio band.
b) Press Up or Down Button to tune the radio to a desired station in the selected band.
c) To memorize the current station as a preset, press and hold
Preset Button
1, 2, 3 or 4. Repeat step 1-3 to preset
up to 12 stations (4 AM and 8 FM). To listen to a preset station at any time, select the desired band and pres
s
the
desired
preset button
.
d) Press the Volume + or Volume - on main unit or remote control to adjust the system volume.
e) To turn off the iHC5, press the Alarm Reset/Power Button/End on the main unit or remote control.
Listening to Bluetooth Music Devices (with A2DP and AVRCP profiles)
Before you can play Bluetooth music through the iHC5, you need to pair and link your Bluetooth device with the iHC5.
Pairing and Linking your Bluetooth Device with the iHC5:
a) Make sure your Bluetooth device is fully charged
b) Power Up your Bluetooth device and connect your iHC5 to AC adaptor.
c) Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth controls are found on the
device’s tools or settings menu (see your user manual). Turn on Bluetooth connectivity.
d) Press the Power button on the iHC5 to put it in pairing mode. The Bluetooth icon and “pairing” icon on the
iHC5 will flash.
e) Choose “add a new Bluetooth device” on your device. It will start to search. If the pairing attempt fails or “times
out”, press and hold the Play button on the iHC5 for 4 seconds to restart the process, and repeat “add a new
Bluetooth device” on your Bluetooth device.
f) After your device and the iHC5 have discovered each other, you will be asked to enter a passcode on your
Bluetooth device. The passcode for the iHC5 is: 1234
g) A “Pairing Successful” or similar message should appear on your device and the Bluetooth icon on the iHC5
should stop flashing, followed by a confirmation beep.
h) Pairing will remain intact even if either or both devices are powered off or are taken out of link range (~30 feet).
However, the active link between the devices will be lost and need to be re-established.
i) To re-establish a link, select iHC5 from the Bluetooth devices menu on your Bluetooth device and press the Talk
or Play button on the iHC5 or Remote Control.
P7
Using the iHC5
5
Playing Bluetooth Music:
a) Once your device and the iHC5 are paired and linked, you can start to play Bluetooth music through the iHC5.
b) Initiate music playing on your Bluetooth device.
c) Press the Play/Pause Button on the iHC5 or remote control to play your Bluetooth device. The iHC5 display
will show “Bluetooth” and the Play icon.
d) Press the Play/Pause Button again to pause play; press again to resume it.
e) Use the Volume + or Volume - buttons on the main unit or remote control to adjust the system volume.
f) Press Up or Down Button on the main unit or remote control to go to the next or previous track.
g) To turn off the iHC5, press the Alarm Reset/Power/End Button on the main unit or remote control.
Please remember to turn off your Bluetooth device manually.
Listening to other portable audio devices
If you are using an iPod, MP3 player or other portable audio device, you can play it through the iHC5 via the Line-in Jack.
a) Plug one end of the audio patch cord (included) into the headphone or line-out jack on your device and the other
end of the patch cord into the iHC5 Line-in Jack, located on the back of the unit.
b) Press the Mode Button until “LINE-IN” appears on the bottom of the display, indicating Line-in playing
mode.
c) Turn on and play your device.
d) Use the Volume + or Volume - on the main unit or remote control to adjust the system volume. You may need
to adjust your device volume, too.
e) To turn off the iHC5, press the Alarm Reset/Power/End Button on the main unit or remote control. Please
remember to turn off your device, too.
P8
Using the iHC5
Sleep Operation
Sleep mode lets you sleep to Bluetooth music or the radio, with a Gentle Sleep feature which gradually lowers the
volume until the unit shuts off at the end of sleep time.
a) Press the Sleep Button to enter sleep mode. The Sleep icon will appear on the display to indicate
the unit is in sleep mode and will automatically turn off after the selected time.
b) To adjust the sleep timer from 120, 90, 60, 30 or 15 minutes, press the Sleep Button again.
c) When the display changes back to show the real time, press the Sleep Button once to show the
sleep time remaining. Pressing it again will change the sleep time to the next lowest setting.
d) Sleep mode has independent volume setting so you can adjust the sleep volume without affecting the
normal volume. Use the Volume + or Volume - on the main unit or remote control to adjust
the system volume. The sleep volume will remain at that level the next time you enter sleep mode.
e) To stop listening at any time, press the Alarm Reset/Power Button on main unit or remote control to turn it off.
Dimmer Operation
During normal operation, press the Snooze/Dimmer Button to control the brightness of the LCD display.
P9
Answering and Making Calls with a Bluetooth Mobile Phone
Before using your phone with the iHC5, make sure your Bluetooth phone is paired and linked with iHC5. See Bluetooth
Pairing/Linking section on page 4 for details.
Answering a Call:
a) The incoming number will appear on the display. To answer a call, press the Talk Button . The iHC5 will now
function as a speaker phone.
b) For best sound performance, speak toward the MIC (within 5 feet) and use the Volume + or Volume - button
on the main unit or remote control to adjust the system volume.
c) Call waiting: If you have call waiting and receive a second call, the second number will be displayed and the iHC5
will beep. Press the Talk Button to answer a second call and put the first call on hold.
d) To hang up, press the Alarm Reset/Power/End Button .
Making a Call:
a) You can use either the integrated keypad or the remote to dial numbers manually. Enter the desired number then
press the Talk Button . Press the Clear Button to clear the last digit or press and hold the Talk Button for
2 seconds to clear all digits.
b) To redial the last number dialed, rapidly press the Talk Button twice.
c) To hang up, press the Alarm Reset/Power/End Button .
Mute Function: press the Mute button on the Remote Control to mute the iHC5 speakers during a conversation.
Doing so will not mute the MIC or your bluetooth device (cell phone).
Ringer Level Select:
a) To adjust the iHC5 ringer volume, press and hold the Down Button until you hear a beep. Repeat to adjust
ringer levels to Hi, Low or Off. The ring level setting appears on the bottom left of the display.
7
Using the iHC5
Replacing the Remote Control Battery
The remote control battery is already installed at the factory. When the remote control
stops operating or its range seems reduced, it is time to replace the battery.
1. The battery door is located on the back end of the remote.
2. Pull the battery door to release the battery door latch.
3. Insert a CR2032 battery, checking that the + and – sides of the battery match the drawing
inside the battery compartment.
4. Replace the battery door into the remote control.
Note: Make sure you dispose of batteries properly (see your local regulations).
For best results, aim remote control towards the remote sensor on the lower left corner of
the display.
Battery Door
Replacing Clock Backup Battery
The iHC5 uses a backup battery system (3 pre-installed AA
batteries) to provide continuous alarm operation and clock settings
in the event of a power failure. If the backup battery has been
installed and a power failure occurs or the AC cord is accidentally
disconnected, the display backlight will not remain lit, but current
time and alarm time settings will be temporarily maintained.
Otherwise, you must reset the time and alarm settings.
NOTE:
Please make sure the AC adaptor is connected. Otherwise
all settings may be lost during battery replacement.
1. Open the backup battery compartment door located on the
bottom of the unit.
2. Insert 3 AA batteries, checking that the polarity (+ and – ends of
the battery) matches the drawing near the battery compartment.
3. Close the compartment door.
Note: Make sure you dispose of batteries properly (see your local regulations).
Replace Backup Battery
P10
Altri manuali per iHC5
1
Indice
Altri manuali iHome Radiosveglia
iHome
iHome iDL95 Manuale utente
iHome
iHome iPL23 Manuale utente
iHome
iHome iHM50R Manuale utente
iHome
iHome HDL95 Manuale utente
iHome
iHome iHome iBT20 Manuale utente
iHome
iHome HBH34 Manuale utente
iHome
iHome HDL99 Manuale utente
iHome
iHome IA100 Manuale utente
iHome
iHome iPL24 Manuale utente
iHome
iHome iBN180 Manuale utente
iHome
iHome iWBT5 Manuale utente
iHome
iHome iDL100 Manuale utente
iHome
iHome iDL46 Manuale utente
iHome
iHome HiP50 Manuale utente
iHome
iHome iBT234 Manuale utente
iHome
iHome iDL44 Manuale utente
iHome
iHome Hello Kitty Si-B62 Manuale utente
iHome
iHome ZN9 Manuale utente
iHome
iHome HBN22 Manuale utente
iHome
iHome IM29 Manuale utente
