iHome iBN4A Manuale utente
instruction manual
iBN4 IB r4
Size: 153mm x 120mm
Printing color: Black
NOV 29, 2013 P1
NFC Bluetooth Wireless
Boombox with FM Radio
and Rechargeable Battery
Model: iBN4(USA)
iBN4A(Canada)
iBN4
Introduction
Thank you for purchasing the iHome iBN4. This product is designed to provide high quality wireless sound
for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic
operation and care of the unit. Please read them carefully and keep for future reference.
This unit features NFC (near field communication) technology which allows you to wirelessly connect
your NFC–enabled device to instantly ‘pair and play’. See your device’s user manual for details on how
to interact with NFC devices.
If your Bluetooth device does not support NFC, you can pair it manually with this unit.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as benzene, thinner or similar materials can damage the surface of the unit.
P2
iBN4
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P3
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions:
(1) This device may not cause interference and
(2) This device must accept any interference received, including interference that may cause undesired operation
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
IC Statement
This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can
obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102
rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
FCC ID:EMOIBN4A
IC:986B-IBN4A
8/27/2013
QDID:B020169
iBN4
Table of Contents
Meet Your iBN4............................................................................................................ 1-2
Setting Up the Unit/Charging the Unit..................................................................................3
Using Bluetooth: Pairing And Playing Your Device Using NFC...................................................4
Using Bluetooth: Pairing Your Device Manually........................................................................5
Playing Audio Via Bluetooth................................................................................................6
Playing Audio Via Aux-in/ Playing Audio Via Aux-out ..............................................................7
FM Radio/ Using FM Radio in Other Countries......................................................................8
Resetting the Unit..............................................................................................................9
Internal Rechargeable Lithium-ion Battery.............................................................................10
Consumer Product Safety Guide................................................................................... 11-12
Troubleshooting..............................................................................................................13
Warranty......................................................................................................................14
P4
Meet Your iBN4
iBN4
1
DC Jack
Line-out Jack Line-in Jack
P5
Back Bottom
Top
Power/Mode Dial Volume Dial
Play/Pause and Pairing Button
Reverse/Forward/Setting Buttons
Display
NFC Antenna
Sept 02, 2013
iBN4
2
Included
• iBN4 system
• 100V-240V universal AC adaptor
• 3.5mm stereo audio cable
P6
power adaptor The handle of the unit can be placed
in two positions, upright for carrying,
or back for general use or tilt-back
play.
audio
cable
iBN4
Using the
3
P7
Fully charged Needs charging
Battery Indicator (charge status)
Setting Up the Unit
The unit can be operated using the included AC adaptor
or on the internal rechargeable lithium ion battery for
portable use.
Connect the included AC adaptor to the DC jack located
on the back of the unit and connect the other end to a
working wall outlet.
Charging the Unit
The internal lithium ion battery charges when connected to
power via the AC adaptor. For first time use, charge the
battery completely (for about 6 hours). The battery
indicator on the display shows the battery/charging
status.
Operating the Unit in Battery
Mode
When operating on battery power, the
display shuts off automatically after 5
seconds to conserve battery power.
RESET
RESET
TEST
TEST
iBN4
Using the
4
P8
Using Bluetooth:
Pairing and Playing Your Device Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your
Device Manually”.
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability
(typically under ‘Settings’) as described in the device’s user manual.
2. Place your NFC–enabled device in play mode.
3. Turn the dial on the speaker unit to mode.
4. Touch the area of your playing NFC device against the
antenna on top of the unit. The unit will enter automatic pairing
mode, tones will sound and “PAIR” will flash on the display while
the unit attempts to pair. If prompted, accept Bluetooth pairing.
“iHome iBN4” should appear on your device’s menu under
Bluetooth Settings.
Once paired with a device, the PAIR indicator
will stop flashing, the Bluetooth icon will remain and your music will
play through the unit.
5.
Use the controls on your device to play or pause audio and navigate tracks.
6. Turn the Volume Dial to adjust the volume on the unit. You can also adjust volume on your device.
7. When done listening, turn the Power dial to turn the unit OFF. Remember to turn off your audio device,
too.
NOTE: To disconnect your device, simply touch it again on the antenna of the unit. To pair a device
manually, please see the following “Using Bluetooth: Pairing Your Device Manually” section.
8/27/2013
5
iBN4
Using the
P9
Using Bluetooth: Pairing Your Device Manually
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user
manual.
2. Turn the Power/Mode Dial right to turn the unit ON (pairing is available in any mode).
3. Press and hold the Pairing/Play Pause Button on the unit for 2 seconds
to begin pairing the unit with your device. “PAIR” will flash on the display,
indicating pairing attempt.
“iHome iBN4” should appear on your device’s menu. If “Not Connected” or similar message appears,
select “iHome iBN4” on the device to connect it. If your device asks for a password, enter 1234 or
0000 on the keyboard of your device. If no device is paired within 2 minutes, a tone will sound and the
unit will revert to its previous mode. To retry pairing, turn the Power/Mode Dial to the OFF position (left)
then follow steps 2 & 3 again.
4.
Once paired with a device, the
PAIR indicator on the display will stop flashing then disappear and the
Bluetooth icon will remain.
On some devices, you must then select “Use as Audio Device” or similar on the
device’s Bluetooth menu. Once paired, your device should link to the iBN4 whenever within range (about
30 feet).
NOTE: The unit can auto-link with up to 3 previously paired devices.
Pairing with a Different Device
When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as
long as that device is still within range (about 30 feet). To pair with a different device you must turn off the
Bluetooth capability of the already paired device.
6
P10
Playing Audio Via Bluetooth
1. Turn the Power/Mode Dial to the Bluetooth position (right) to enter Bluetooth mode. The Bluetooth
Indicator on the display will flash and a tone will sound as the unit searches for a previously paired
device, and then turn solid once a previously paired device is detected.
2. Press the Pairing/Play Pause Button on the unit to play audio from your linked Bluetooth device.
While audio is playing, press to pause play, and again to resume play.
3. Press the or Buttons on the unit to go to the previous or next track. (This function is disabled on some
devices).
4. Turn the Volume Dial to control the system volume.
NOTE:The volume ranges from 0 - 20. While the dial can still to be turned when these limits are
reached, doing so has no effect.
5. When done listening, turn the Power/Mode Dial to the OFF position (left) to turn the unit off. Remember
to turn off your audio device, too.
iBN4
Using the
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali iHome Sistema stereo portatile
