IKEA UPPLEVA Manuale utente
UPPLEVA
3
ENGLISH 4
中文 11
4
Safety
•Pregnant women and people who have heart
problems should not use the 3D glasses.
•Watching 3D TV is not recommended for children.
•Do not use the 3D glasses for purposes other
than specied.
•Watching 3D images for an extended period of
time may cause headache or eye strain. If you
feel any discomfort, stop viewing 3D TV and rest
for a while.
•Anyone who has had a seizure, loss of awareness,
or other symptom linked to an epileptic condition,
or has a family history of epilepsy, should contact a
medical professional before using the 3D function.
Care instructions
•Do not place the 3D glasses in a location exposed
to direct sunlight, re, heat or water. This may
cause the 3D glasses to malfunction.
•When cleaning the 3D glasses, gently wipe with
a dry and soft cloth. Make sure that you remove
any dust or dirt from the cloth rst.
•The 3D glasses may not work properly due to
the interference from magnetic uorescent light
(50Hz/60Hz), we recommend you turn off the light
when you watch 3D TV.
ENGLISH
5
Disposal of your old product and
batteries
The crossed-out wheeled bin symbol indicates that
the item should be disposed of separately from
household waste. The item should be handed in for
recycling in accordance with local environmental
regulations for waste disposal.
By separating a marked item from household waste,
you will help reduce the volume of waste sent to
incinerators or land-ll and minimize any potential
negative impact on human health and the environment.
For more information, please contact your IKEA store.
6
Product overview
Preparation
Inserting or replacing the battery
Replace the battery when the LED
indicator blinks continuously.
Power/mode button
LED indicator
Battery cover
7
Pairing the 3D glasses with your TV
This product uses RF (radio frequency) technology. To
prevent interference from other TVs, the 3D glasses
need to be paired with your 3D TV the rst time they
are used. After pairing, the 3D glasses receive the 3D
signal of the paired TV only. You can use the glasses
with another TV if you pair them with it. You will need
to pair them again if you want to use them with your
original TV.
How to pair your glasses with your TV:
1. Turn on the TV, then set the TV to 3D mode (refer
to the TV manual).
2. Press and hold the Power/mode button on the 3D
glasses for 6 seconds. The LED indicator will blink
if pairing has started. When pairing is in progress,
the LED indicator blinks continuously. The LED
indicator will turn itself off when the pairing is
successful. If the pairing has failed, the LED
indicator will keep blinking until the 3D glasses
enter standby.
3. The 3D glasses will begin to function if the pairing
is completed. You will notice the dark tint of the
lenses changing.
8
Using your 3D glasses
•Power on/off (standby): Press the Power/mode
button. The LED indicator will blink once when the
3D glasses are powered on and ready to receive a
signal. Press and hold the button for 6 seconds to
enter standby mode.
•There are three modes for the 3D glasses: 3D
mode, right eye mode and left eye mode. 3D
mode is the default mode and is used when
watching TV. The right and left modes are used
for gaming. They let two players use the whole
screen at the same time (each player sees only
their own dedicated screen).
Notes:
•Ensure your TV and the 3D glasses are no farther
than 1 meter apart from each other while pairing is
in process. Power off any other TVs that are located
within 3 to 5 meters, or exit their 3D mode to avoid
pairing the wrong 3D TV.
•Complete step 1 and 2 within 60 seconds, otherwise,
the 3D glasses will enter standby mode automatically.
The 3D glasses will enter standby if no signal is
available within 60 seconds.
•If the pairing procedure has failed, there may be
no signal from the transmitter or there may be a
problem with the signal. Check you are following all
the instructions and try again.
•Pairing might be needed again after TV is repaired.
•Make sure your battery is not discharged.
9
1. Press Power/mode briey to set the glasses to 3D
mode.
2. In 3D mode, press Power/mode for 1s to set the
glasses to left eye mode.
3. In left eye or right eye mode, press Power/
mode for 1s to switch between left eye and right
eye modes. Press Power/mode for 6s to set the
glasses to standby.
Troubleshooting
There is no 3D effect after the 3D glasses are
powered on:
•Make sure the 3D glasses are less than 6 metres
away from the TV.
•Make sure the TV is in 3D mode.
•Check if the pairing is completed or not by
pressing and holding Power/mode for 6 seconds.
•Replace the battery if it is discharged.
The 3D image is ashing or ickering:
•The battery is nearly discharged. Replace it with
a new one.
•There is light interference around, such as
strong magnetic uorescent light (50/60Hz). If
interference happens, turn off the light.
10
Specications
Model number: GX21AC
Product name: 3D glasses
Product type: shutter
Synchronization mode: radio frequency
Weight: about 26g
Working current: <1mA
Power supply: 3V Li/MnO2 Battery (CR2025)
Working temperature: 0°C ~ 40°C
Storage temperature: -5°C ~ 45°C
Recommended viewing distance: 2 - 6m
Note:
For the purpose of performance improvement,
design and specications are subject to change
without notice.
Altri manuali per UPPLEVA
15
Indice
Altri manuali IKEA Occhiali 3D
