IKEA VARMFRONT Manuale utente

VARMFRONT

Max 300 mm

(max 1')

English 6

Deutsch 9

Français 13

Nederlands 16

Dansk 21

Íslenska 24

Norsk 28

Suomi 32

Svenska 35

Česky 39

Español 42

Italiano 46

Magyar 49

Polski 53

Eesti 58

Latviešu 62

Lietuvių 65

Portugues 69

Româna 73

Slovensky 76

Български 79

Hrvatski 84

Ελληνικά 87

Русский 91

Yкраїнська 95

Srpski 99

Slovenščina 102

Türkçe 106

 111

English

Functions

1. POWER button

2. LED indicators

3. USB-C (charging and supply power)

4. USB-A (only supply power)

Charging power bank

• Connect the USB-C cable to the USB-C port of the power bank rst

and then connect the USB cable to a USB-charger or USB-outlet that

can provide sucient power to charge the power bank. The LED

indicators will display the charging status.

Supplypowertodevices

• Connect the USB cable to USB-C or USB-A port of the power bank

rst and then connect the USB-cable to your device that you want

to charge.

• The power bank will detect a connected device and start charging

automatically.

• The LED indicators will display the remaining charge in the power

bank during discharging.

Powerbuttonfunction(E2037)

Supply

power mode

No action

Stop

supplying

power

No action

Switch to the

small current

supply power

mode or back

to normal

supply power

mode

Charging

mode

USB-A is

ready to

use.

No action

Sleeping

mode

Shows via

LED the

remaining

charge

and that

USB-A is

ready to

use.

No action

Current

mode

Single

press

Double

press

Long

press

Check power status

• Click once on the POWER button and the LED indicators will light up

and indicate the remaining power status.

• If the USB cable is not disconnected while the charging process

nishes, push the POWER button rst to restart the charging.

Smallcurrentsupplymode

• Press the POWER button for 8 seconds when your device is being

charged.

• The function is mainly used to charge certain wearable electronic

devices. When charging a device that needs a charging current

less than 100mA via a USB-A port, this mode should be activated.

You can press the button for 3 seconds to exit this mode, it also

automatically closes after 2 hours.

Good to know

• USB cable length and quality inuences charging speed and

performance.

• Devices may get warm during charging; this is completely normal

and they will gradually cool down again after they are fully charged.

• Charging time may vary based on the device’s battery capacity,

charge level, the age of the battery and the temperature in the

surrounding area.

• Storage temperature: -10°C to 25°C.

• Power bank operating temperature: 0°C to 40°C.

• Unplug the power bank from the power source before cleaning and

when it is not in use.

• Power bank should not be left discharged for a longer period.

• Power bank should not be charged while in contact with ammable

materials like textiles.

WARNING

• Do not modify, disassemble, open, drop, crush, puncture or shred

product.

• Only use in dry locations.

• Risk of res and burns. Do not open, crush, heat above 60°C (140°F)

or incinerate.

• Do not subject the product to wet, moist or excessively dusty

environments since this can cause damage to the unit.

• Keep the product away from open ames or sunlight to prevent

heat buildup.

• Keep the product away from high voltage devices.

• Children should be supervised to ensure they do not play with the

product.

• Do not short-circuit the product or its cells.

• In the event of a cell leaking, do not allow the liquid to come in

contact with the skin or eyes.

CARE INSTRUCTION

To clean the unit, wipe with a soft cloth moistened with a little mild

detergent. Use another soft dry cloth to wipe dry.

Product servicing

Do not attempt to repair this product yourself. If you open or remove

parts, you may expose yourself to dangerous voltage points or other

risks.

TECHNICAL DATA

Type: E2037

Capacity: 5200mAh/18.72Wh

Input: 5.0Vdc, max 2.1A (USB-C)

Output: 5.0Vdc, 2.4A, 12W total (USB-C, USB-A)

When both ports are used at the same time, they share 5.0V/2.4A in

total.

Forindooruseonly

RechargeableLi-Ionbatterycellinside.

Manufacturer:IKEAofSwedenAB

Address:Box702SE-34381ÄlmhultSWEDEN

The crossed-out wheeled bin symbol indicates that the item

should be disposed of separately from household waste.

The item should be handed in for recycling in accordance

with local environmental regulations for waste disposal. By

separating a marked item from household waste, you will

help reduce the volume of waste sent to incinerators or land-ll and

minimize any potential negative impact on human health and the

environment. For more information, please contact your IKEA store.

Deutsch

Funktionen

1. Einschalttaste

2. LED-Anzeigen

3. USB-C (Lademöglichkeit und Stromversorgung)

4. USB-A (nur Stromversorgung)

DiePowerbankauaden

• Zuerst das USB-C-Kabel an den USB-C-Anschluss der Powerbank

anschließen und dann das USB-Kabel mit einem USB-Ladegerät

oder einem USB-Anschluss verbinden, das bzw. der genügend

Strom bietet, um die Powerbank aufzuladen. Die LED-Anzeigen

zeigen den Ladestatus an.

Strom für Geräte

• Zuerst das USB-Kabel an den USB-Coder USB-A-Anschluss der

Powerbank anschließen und danach das USB-Kabel mit dem Gerät

verbinden, das geladen werden soll.

• Die Powerbank erkennt, wenn ein Gerät angeschlossen wird und

beginnt automatisch mit dem Auaden.

• Die LED-Anzeigen signalisieren die noch vorhandene Ladekapazität

in der Powerbank während des Entladens.

FunktionderEinschalttaste(E2037)

Stromvers-

orgungsmodus

Kein

Handlungsbedarf

Stromversorgung

wird gestoppt

Wechsel zum

Lademodus

für Geräte

mit niedriger

Stromstärke

oder zurück

zum normalen

Stromvers-

orgungsmodus

Lademodus

Der USB-A-

Anschluss ist

einsatzbereit.

Kein

Handlungs-

bedarf

Kein

Handlungs-

bedarf

Ruhemodus

Zeigt mithilfe

der LED-

Anzeige den

verbleibenden

Ladevorgang

an und

außerdem,

dass der USB-

A-Anschluss

einsatzbereit

ist.

Kein

Handlungs-

bedarf

Kein

Handlungs-

bedarf

Aktueller

Modus

Einmaliges

Drücken:

Zwei-

maliges

Drücken:

Langes

Drücken:

Altri manuali per VARMFRONT

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente