IKEA SOLVINDEN Manuale utente

SOLVINDEN

2AA-2289663-1

English

J1752

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical products, basic precautions should

always be followed including the following:

READ AND FOLLOW ALL

SAFETY INSTRUCTIONS

Do not use seasonal products outdoors unless marked

suitable for indoor and outdoor use.

When products are used in outdoor applications,

connect the product to a Ground Fault Circuit

Interrupting (GFCI) outlet. If one is not provided, contact

a qualied electrician for proper installation.

This seasonal use product is not intended for permanent

installation or use.

Do not mount or place near gas or electric heaters,

replaces, candles or other similar sources of heat.

Do not secure the wiring of the product with staples or

nails, or place on sharp hooks or nails.

Do not let lamps rest on the supply cord or on any wire.

Unplug the product when leaving the house, when

retiring for the night, or if left unattended.

This is an electric product - not a toy! To avoid risk of re,

burns, personal injury and electric shock it should not be

played with or placed where small children can reach it.

Do not use this product for other than its intended use.

Do not hang ornaments or other objects from cord, wire,

or light string.

Do not close doors or windows on the product or

extension cords as this may damage the wire insulation.

Do not cover the product with cloth, paper or any

material not part of the product when in use.

Read and follow all instructions that are on the product

or provided with the product.

English

CAUTION!

Strangulation hazard.

Hang out of reach of young children.

English

USE AND CARE

INSTRUCTIONS

When the product is placed on a live tree, the tree should

be well maintained and fresh. Do not place on live trees

in which the needles are brown or break o easily. Keep

the tree holder lled with water.

If the product is placed on a tree, the tree should be well

secured and stable.

4AA-2289663-1

Before using or reusing, inspect product carefully.

Discard any products that have cut, damaged, or frayed

wire insulation or cords, cracks in the lampholders or

enclosures, loose connections, or exposed copper wire.

When storing the product, carefully remove the product

from wherever it is placed, including trees, branches,

or bushes, to avoid any undue strain or stress on the

product conductors, connections, and wires.

When not in use, store neatly in a cool, dry location

protected from sunlight.

English

SEASONAL AND HOLIDAY LIGHTS

INTRODUCTION

This leaet provides guidance on the purchase,

inspection, installation and use of Seasonal and Holiday

lighting sets.

Modern Seasonal and Holiday lighting sets are safe

to use if simple checks are taken. It is obvious but

necessary to say, only use outdoor lights outdoors. If

young children are around use Extra low voltage lights

(24 or 12 Volts).

Outdoors also use Extra low voltage lights unless you are

going to make sure they are installed well out of reach

of everyone. If you are going to put mains voltage lights

outdoors protect them and everyone else by using a

plug-in RCD. These are the devices you need when using

a lawnmower or hedge trimmer.

Electric lamps are much much safer than candles, go

electric, no candles on your tree or anywhere near it.

You may know they are just for show but someone else

during the festivities might think lighting the candles is a

great idea. Go electric.

Have you got young people in the house? Have you a

working smoke alarm? Have you tested it? Go-on, do

it now, you know it makes sense. Then go and buy a

battery, it is so very necessary for a happy Holiday. First

the smoke alarm, then the fancy decorations!

Visual inspections

New Seasonal and Holiday lighting sets should be

checked and inspected in accordance with the

manufacturer's instructions provided with the set.

Don't throw away the box, keep it to store the lighting

sets in, it may have information on buying replacement

lamps.

Older sets, which may have been hurriedly dismantled

following the previous year's festivities and stored for 12

months, need to be carefully checked for any damage

to the lamps (light bulbs), lampholders and conductors

(wires).

The following are examples of items that should be

checked before plugging in the set to the mains.

The exible cable and lampholders:

is the cable in good condition?

is it free from cuts, fraying and damage?

are the connections at each lampholder sound?

are the lampholders free from cracks or damage, that

might give access to the live cable or live contacts of the

lamps?

6AA-2289663-1

The lamps:

are they all in place, undamaged, properly screwed or

pushed in?

The plug/transformer

Check that the plug is not damaged.

Look for signs of overheating.

Check the fuse (if any), make sure it is the correct rating.

IF ANY DOUBT, HAVE THE SET CHECKED BY A QUALIFIED

ELECTRICIAN BEFORE USE OR SCRAP AND PURCHASE A

NEW SET.

Where the set is intended to be connected to the supply

via a 'plug-in transformer', only use the transformer

supplied with the set. Otherwise if the output voltage

does not match the voltage of the lamps overheating

may result.

Functional Tests

After the visual inspection and correcting any faults

found, including tightening of lamps and replacement

of broken or missing lamps, plug in and switch on the

lamp set. Replace any faulty lamps with ones of the

same voltage rating and manufacture, check the box for

details. Spare lamps are usually provided with the set.

Lamps should not be removed or installed with the

supply on.

Only replace 'fused' lamps (sometimes identied by a

white mark on the glass) with identical 'fused' lamps.

Installation on Christmas Tree

Christmas trees because of the pine oils, and particularly

after being in a heated room for a week or two, are very

ammable. Tree decorations may also be ammable

and should be kept clear of the lamps as far as possible.

Christmas trees should be mounted securely so that they

are unlikely to fall over, or be knocked over by children or

pets. They must be kept clear of heat sources, including

spot lamps and particularly CANDLES.

Take care when decorating the tree, use a stepladder if

the tree is tall and wear shoes. Many more accidents are

caused by treading on plugs and lamps in bare feet than

faulty electrical equipment.

English

Guidance for Seasonal and Holiday lighting sets.

Follow these and any other instruction provided by

the manufacturer, it is for your safety.

1. Install the lighting chains so that there is easy access

to the socket-outlet so that the lights can be turned

o when you go out or go to bed. Never leave lighting

chains on when you go out or go to bed.

2. Do not remove or insert lamps while the lighting chain

is connected to the supply.

3. For series-connected lamps other than those in sealed

lighting chains, replace failed lamps immediately by

lamps of the same rated voltage and wattage to prevent

overheating; this requirement does not apply to sealed

lighting chains.

8AA-2289663-1

4. Do not connect the chain to the supply while it is in

the packing.

5. For series-connected lamps where fused lamps are

used, do not replace a fused lamp with a non-fused

lamp.

6. Ensure all lampholders are tted with a lamp.

7. Ordinary lighting chains marked for indoor use shall

not be used outdoors.

8. Lighting chains which rely on gaskets to provide

protection against ingress of dust and moisture must

not be used without all gaskets being in place.

9. Make sure to follow the markings regarding series and

parallel connection of lighting strings.

10. Only replace 'fused' lamps (sometimes identied by a

white mark on the glass) with identical 'fused' lamps.

11. For non-standard lamps (e.g. lamps of push-in

type) replacement lamps must be of the same types

as those delivered originally or a type specied by the

manufacturer.

12. Do not attempt to replace non-replaceable lamps.

English

This device complies with part 15 of the FCC Rules.

Operation is subjected to the following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received,

including interference that may cause undesired

operation.

WARNING

Changes or modications not expressly approved by the

party responsible for compliance could void the user's

authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation.

10 AA-2289663-1

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

The crossed-out wheeled bin symbol indicates that the

item should be disposed of separately from household

waste. The item should be handed in for recycling in

accordance with local environmental regulations for

waste disposal. By separating a marked item from

household waste, you will help reduce the volume of

waste sent to incinerators or land-ll and minimize any

potential negative impact on human health and the

environment. For more information, please contact your

IKEA store.

SAVE THESE

INSTRUCTIONS

Altri manuali per SOLVINDEN

Indice

Lingue:

Altri manuali IKEA Attrezzatura di illuminazione

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente

Silvair

Silvair MESH-CEDRP Manuale utente