6
Congratulations for choosing this high-quality equipment! We hope it will be of great help to you.
Remember to read the instruction manual before using the equipment for the first time in order to
ensure safe usage. If you have any doubt or problems, please contact your dealer or the importer.
We wish you safe and pleasant work with this equipment!
SPECIFICATIONS
Strap widths 13mm (1/2”), 16mm (5/8”), 19mm (3/4”)
Strap thickness 0,38mm (0,015”) – 0,58mm (0,023”)
Paino 3,5kg
SAFETY INSTRUCTIONS
1. Always wear eye, face and hand protection when operating this tool.
2. Do not put hands or other parts of the body between the strap and the package.
3. Use the original replacement parts to ensure its reliability.
4. Always read operating instructions before use.
MAINTENANCE
1. Clean this tool periodically with compressed air to remove any dust or dirt.
2. Apply light machine oil to all moving parts.
OPERATION INSTRUCTIONS
Prior to operation, make sure the front strap stop (13), side strap stop (91 for 16mm and 19mm, 92
for 13mm and 19mm), and rear strap stop (36 for 16mm and 19mm, 37 for 13mm and 16mm) are
equivalent to your strap width. (See ADJUSTMENTS for installation of strap stops).
1. Place strapping around the package and hold in place
with left hand. The end of strap is underneath.
2. Pull the feedwheel handle (58) toward the sealing
handle (73) with your right hand. While in this position,
insert the strap into the sealing section against the wall
of housing so the strap seat inside the sidestrap stop.
The end of strap should protrude approx. 2cm (1”)
beyond the front strap stop (13). Release the feedwheel
handle (58) so the strap is locked and ready to be
tightened.
EN
