5
TORQUE MEASUREMENT
Program 1Modes
With the power OFF, press and hold
the Mbutton and then press and
release (do not hold) the Pbutton.
When 1appears on the left side of
the screen, press –or +/C to cycle:
PPeak mode captures peak torque
APeak mode w/auto zero reset
captures peak torque and resets to
zero at programmed interval
tReal time mode displays transient
torque values and peak is not held.
Press and release the Mbutton to
advance to the next setting.
Program 2Auto zero reset duration.
If peak mode w/auto zero reset (1 A)
has not been previously selected,
press and release the Mbutton to
skip this step.
If peak mode w/auto zero reset has
been selected, press –or +/C to
change the duration a peak value
remains on screen before it resets to
zero 1~10 seconds, (factory default is
2 seconds). Press and release the M
button to advance to the next setting.
Program 3Audible beep
Confirms ready mode and selections,
alerts to torque presets and limits.
Press –or +/C to turn ON or OFF.
Press and release the Mbutton to
advance to the next setting.
1
CYCLE WITH – OR +/C KEYS
INITIAL PROGRAMMING
7
p A t
2
CYCLE WITH – OR +/C KEYS
3
1 2... 10
o
noff
CYCLE WITH – OR +/C KEYS
