imagistics C400 Manuale utente
www.imagistics.com
Operating Manual
For use with Imagistics and Pitney Bowes C400/C550 copiers.
C400/C550
i
Introduction
C400/550 Copier
If you should need service...
Should your Copier develop a problem that cannot be remedied by using the
maintenance or troubleshooting procedures outlined in this manual please contact
your Imagistics Customer Service Representative at 1-800-243-5556.
Warning:
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with this instruction manual, may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart J of Part 15
of FCC Rules, which are designed to provide reasonable protection against
such interference when operated in a commercial environment.
Notice to Canadian customers
This digital apparatus does not exceed the Class A limits for radio noise for digi-
tal apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
About Imagistics products, services and documentation
Imagistics has made every effort possible to ensure the usefulness of our products and the accu-
racy of our documentation. Due to our continuing efforts to improve products and services, recent
equipment modifications or improvements may not be documented in this manual. In addition, the
specifications are subject to change without notice.
This Imagistics copier meets the
EPA Energy Star Guidelines
for Energy Efficiency
ii
Introduction Copier Supplies
Ordering Supplies
The supplies listed below have all been designed especially for Imagistics copiers to
ensure maximum product performance and quality. Substituting other supplies
may result in inferior copy quality and machine malfunction.
Ordering supplies is quick and easy.
Call the Imagistics Copier Supply Line 1-800-462-6797.
Description/Order Number
Printpowder® Toner
423-0
Copier Paper (8 1/2" x 11")
471-1
Copier Paper (8 1/2" x 14")
462-1
Copier Paper (11" x 17")
479-1
3-Hole Punched
Copy Paper (8 1/2" x 11")
471-9
Transparencies
257-9
Copier Label Sheets
556-1
Developer*
423-4
Staples (Cartridge type)
847-1
Staples (Cartridge type)
847-0
How much to
keep on hand
1 Carton
4 Cartons
1 Carton
1 Carton
1 Carton
1 Box
1 Box
1 Carton
1 Carton
1 Carton
Description
Contains 4 toner cartridges
per carton
Contains 5,000 sheets
per carton (10 reams)
Contains 3,000 sheets
per carton (6 reams)
Contains 2,500 sheets
per carton (5 reams)
Contains 5,000 sheets
per carton (10 reams)
Contains 100 sheets
per carton
Contains 100 sheets
per carton (33 labels per
sheet)
Contains 1 bottle per carton
For 9769 model sorter/stapler
See page 8 for sorter types
For 9770 through 9776
model sorter/staplers
See page 8 for sorter types
* Note: This item can only be installed by an Imagistics Customer Service
Representative and should be kept on hand for preventative
maintenance.
Introduction Contents
iii
1
Chapter Safety Notes
Installing The Copier p.2
Installation Site
Power Source
Grounding
Space Requirements
Precautions For Use p.3
Operating Environment
Using the Copier Supplies
Care of Copier Supplies
Moving
iv
2
Chapter Overview
Types of Copies p.6
Copier and Peripherals p.8
Copier Parts and Accessories p.10
Control Panel Keys and Indicators p.16
Using the Touch Panel p.18
Main Display Screen
How the Screen is Organized
Operating the Touch Panel
Turning ON/OFF, Initial Mode p.20
Turning ON and OFF
Initial Mode
Auxiliary Functions p.21
•Panel Resetting
•Auto Panel Reset
•Auto Copy Start
•Energy Saver
•Interrupt
•Mode Check
•Access Number
v
3
Chapter Making Copies
Basic Copying Overview p.24
Placing Originals p.29
Manual Bypass Copying p.32
Basic Functions p.34
Copy Paper Size p.34
Zoom Ratio p.36
Image Density p.40
Original
➧
Copy Type p.42
•1
➧
1•1
➧
2 [2 in 1]
•1
➧
2 •1 [2 in 1]
➧
1
•2
➧
1 •2 [2 in 1]
➧
1
•2
➧
2 •Book
➧
1
•1
➧
[2 in 1] •Book
➧
2
Finishing Mode p.48
•Non-Sort
•Sort
•Sort Staple
•Batch
•Hole Punch
•Manual Staple
•Auto Dual Function
Auxiliary Functions p.58
•Cover p.58
•Auto Original Count p.61
•Page Insertion p.62
•Transparency Interleaving p.68
•Create Margin p.72
•Edge/Frame Erase p.74
4
Chapter Using the Programming Mode
vi
5
Chapter Error Messages
“The Selected Paper Drawer is Empty” p.102
“Add Toner” p. 108
“The Staple Cartridge is Empty” p. 110
“A Paper Jam Has Been Detected...” p. 114
•Misfeed Location Displays p.114
•Misfeed Clearing Procedures p.115
Copier p.115
Copier ( Multi Bypass Tray ) p.117
Paper Feed Cabinet ( 2-Drawer Type ) p.118
Paper Feed Cabinet ( 1-Drawer Type ) p.119
Duplex Unit p.120
Large Capacity Cassette p.121
Duplexing Document Feeder p.122
Automatic Document Feeder p.123
When the “Wrench” Symbol Appears p.125
What Does Each Message Mean? p. 126
Job Memory Input and Job Presets p.78
• Job Memory Input
• Recalling A Job from Memory
Zoom Memory Input p.82
Meter Count, Image Quality Cycle, and Drum Dehumidifier p.21
Key Operator p.84
• Key Operator Functions
• Making the Key Operator Settings
• Copy Track Function
vii
6
Chapter Troubleshooting
Improving Copy Quality p.130
Solving Common Copier Problems p.132
Specifications p.134
•Copier
•Duplexing Document Feeder
•Automatic Document Feeder
•Staple Sorter (10-Bin)
•Staple Sorter (20-Bin)
•Paper Feed Cabinet (1-Drawer Type)
•Duplex Cabinet
•Duplex Unit
•Large Capacity Cassette
Care of the Copier p.140
Index p.146
7
Chapter Miscellaneous
Terms and Symbols for the Type of Originals and Copy Paper
viii
A few special and terms symbols are used in this manual to designate types of originals and copy paper.
This page explains about these terms and symbols
When we talk about the size of the original or
copy, we call side A “width” and side B “length.”
A: Width
B: Length
Lengthwise
When the original or copy has a “length longer
than its “width,” we call it “lengthwise” and use
symbol “L” or this symbol
Crosswise
When the original has a “length” shorter than its
“width”, it is called crosswise and is represented
by this paper symbol
Feeding Direction (copy paper path)
In this copier system copy paper is taken up from the right-hand side of the copier and fed through the copier toward the
left-hand side, face up onto the Copy Tray. In the figure below, the direction in which the copy paper, as indicated by the
arrow, is called the “feeding direction.”
“Width” and “Length”
Terms and Symbols
1
1
Chapter
This chapter explains about the operating environment, conditions, and precautions for use.
Safety Notes
1
1 Installing The Copier p.2
Installation Site
Power Source
Grounding
Space Requirements
2
2 Precautions For Use p.3
Operating Environment
Safety Precautions
Moving the Copier
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali imagistics Fotocopiatrice
