IMC IMCLM-ST Guida per l'amministratore
INTERNATIONAL MACHIINE CONCEPTS
Page 1of 20
Operation Instruction
Manual
IMCLM-ST
Vertical Round Bottle Labeling Machine
INTERNATIONAL MACHIINE CONCEPTS
Page 2of 20
CONTENT
1 Introduction .......................................................................................................5
1.1System component ........................................................................................5
1.2 System parameter: .......................................................................................5
1.3 Human-computer interface: .......................................................................5
1.3.1 Human-computer interface...................................................................5
1.3.2 Operation system start:..........................................................................6
1.3.3 Boot screen: ...........................................................................................7
1.3.4 Operation running interface:................................................................7
1.3.5 Parameter set interface: ........................................................................8
2 Overview.............................................................................................................9
3 Principle and Structure ...................................................................................10
3.1 .1Outline ....................................................................................................10
3.1 .2 Principle.................................................................................................10
3.1 .3 Structur ..................................................................................................10
INTERNATIONAL MACHIINE CONCEPTS
Page 3of 20
3.2 Main components ......................................................................................11
3.3 Parameter...................................................................................................12
4 Operation procedure and adjustment .............................................................12
4.1 Procedure flow...........................................................................................12
4.2 Check the sensor is well. ...........................................................................13
4.3 Adjustment of the labeling machine .........................................................13
4.4 Stripper parallelism adjustment................................................................13
4.5 Adjustment of bottle space and correct device .........................................15
5 Attentions .........................................................................................................15
6 Common faults analyses .................................................................................16
7 Maintenance ....................................................................................................17
8 Appendix ..........................................................................................................17
8.1 Optical fiber sensor specification (See appendix 1) ...............................17
8.2Sketch map chart (See appendix 2) ...........................................................17
8.3 Electrical principle chart (See appendix 3) ..............................................17
9 Packaging lists and After-sale service ............................................................18
INTERNATIONAL MACHIINE CONCEPTS
Page 4of 20
9.1 packaging list.............................................................................................18
9.2 Product certificate .....................................................................................19
9.3 Warranty Card...........................................................................................19
9.3.1 From date of sale, the warranty as follow:.........................................19
9.3.2 Check the machine model and machine no. ......................................20
9.3.3 Safe-keeping the invoice and warranty card ......................................20
INTERNATIONAL MACHIINE CONCEPTS
Page 5of 20
1 Introduction
This machine adopts DELTA-DVP14SS11T2 (Delta) as the core control part for good
working: reasonable electrical design and human-computer software design, providing
high performance and easy operation.
1.1System component：
Human-computer interface
Programmable Logic Controller (PLC): DELTA-DVP14SS11T2 (Delta)
Optical fiber sensors: Keyence (Japan)
1.2 System parameter:
Environment: Temperature 5℃-50℃Humidity 20%-90%
Power supply: Input AC 220V±10% (50Hz) Output DC 24V±2V
PLC: Input AC 220V 8 Transistors Output DC no contact 6 Transistors
1.3 Human-computer interface:
1.3.1 Human-computer interface: 5.7＂FSTNLCD Touch screen
INTERNATIONAL MACHIINE CONCEPTS
Page 6of 20
1.3.2 Operation system start:
Step1 Link the machine to power supply 220V.
Step2 Put the Emergency Stop Button in the normal position. (When the machine is
INTERNATIONAL MACHIINE CONCEPTS
Page 7of 20
out of work, it can cut off the power immediately by pressing this button.)
Step3 The machine will enter into [Boot Screen] 2 s latter.
1.3.3 Boot screen:
1.3.4 Operation running interface:
Entering this interface, you can process as follows:
[ON]: Pressing [ON], machine will start to label; pressing [OFF],
machine stops working.
[Front label test]: Pressing [Front label test], the machine enters testing state.
Each pressing, each label feeds. The feeding label quantities
do not count.
[Back label test]: The same as [Front label test]. Pressing [Back label test],
the machine enters testing state. Each pressing, each label
INTERNATIONAL MACHIINE CONCEPTS
Page 8of 20
feeds. The feeding label quantities do not count.
[Clear]: Pressing this button, the total production will be “zero” and
start a new count.
[Language set]: Switching the language: English and Chinese.
[Parameter set]: By pressing, enter into parameter set interface.
1.3.5 Parameter set interface:
[Parameter group]: This group can store a number of parameter setting data,
convenient for changes of different size bottles and labels. You can call
out the parameter setting data directly from the database without resetting,
which will save a lot of time and improve work efficiency.
[Protection impulse]: This is for the protection of the stepper motor, with setting of
200-1000P.
[Back label frequency]: You can set the labeling speed. The unit is Hz. The setting is
INTERNATIONAL MACHIINE CONCEPTS
Page 9of 20
decided by bottle diameter, label length and the labeling speed you want.
Usually, the bigger the bottle is and the longer the label is, the slower the
labeling speed is. On the contrary, the labeling speed will be quick. If not,
the machine will can not normal working.
[Front label frequency]: The same as [Back label frequency].
[Front label OFF]: The front labeling head will not work if shut this. The back
labeling head will continue working for single face labeling.
[Back label OFF]: The same as [Front label OFF].
[Coding delay]: This can set the coding signal connection time, with adjustment of
coding depth and coding time to suit for different type printers. The unit
is second.
[Conveyor OFF]: This can start and stop the conveyor motor to offer time for the
operation people to deal with the bottles on the conveyor. Pressing, the
conveyor will stop moving.
[Coding OFF]: When the machine is working, you can choose starting the printer or
closing the printer. If do not need the printer or stop the printer for a
moment, pressing this button.
[Inverter frequency]: This is to control the speed of the conveyor.
2Overview
LM-ST labeling machine is made to achieve the goal of the rationalization of production
design. The whole labeling process is automatic, with easy operation, high speed and nice
surface. This labeling machine is mainly applied in food, beverage, pharmaceutical,
cosmetic, chemical industry for flat and square bottle single face or two faces labeling.
INTERNATIONAL MACHIINE CONCEPTS
Page 10 of 20
3 Principle and Structure
3.1.1 Outline
LM-ST Vertical Round Bottle Labeling machine in order to achieve the rationalization of
production targets. Labeling process is automated operations, simple operation, fast
production, labeling position unified, beautiful, neat; applicable to the pharmaceutical,
chemical and food industry round container labeling
3.1.2 Principle
The working principle and structural characteristics of different packing objects into the
labeling conveyor belt conveyor belt driven by the bottle into the sub-bottle area, conveyor
continuous movement detected by the visual optical fiber into the bottle, the optical signal
transmission to the PLC, to deal with after the output signal from the PLC input to the
stepper motor, marked out by the stepper motor, through the rolling bodies label on the child,
labeling objects into the next process or container labeling machine conveyor belt.
3.1.3 Structure
Host stepper motor driver, Delta (Taiwan) PLC control system, the Kunlun Winton touch
interface, Pacific Keyence fiber (Japan) devices, and other imported parts, bringing together
a number of leading-edge technology, making the products of the industry with technical
advantages one. Microcomputer automatic control, friendly touch screen interface
man-machine interface, compact mechanical structure, simple operation, powerful; the label
set on the amount counted under the control of printing,
labeling and control off the marked lack of standard, non-ribbon automatic detection and
alarm functions of the unusual circumstances; random capacity display and label the number
of management; label tension adjustment; label length and gap Zhu; host height and front
and rear position adjustment; optional Tape printer; labeling and label detection phototube
Indice
