Impex WM 1403 Manuale utente

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Resistance Chart

Warranty

Ordering Parts

Model

WM 1403

Retain This

Manual for

Reference

06-19-02

OWNER'S

MANUAL

POWERHOUSE HOME GYM

WM 1403

IMPEX FITNESS PRODUCTS

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN....................................................................................……….. 1

IMPORTANT SAFETY NOTICE...................................................................……….. 2

HARDWARE IDENTIFIER.....….....................................................................……….. 3

ASSEMBLY INSTRUCTIONS.........................................................................……….. 4

PARTS LIST…………………………………………………………………………………..19

WEIGHT RESISTANCE CHART………...........................................................………. 20

WARRANTY.................................................................................................…………. 21

ORDERING PARTS.......................................................................................…………21

BEFORE YOU BEGIN

Thank you for selecting the POWERHOUSE WM1403 HOME GYM by IMPEX

FITNESS PRODUCTS. For your safety and benefit, read this manual carefully

before using the machine. As a manufacturer, we are committed to provide you

complete customer satisfaction. If you have any questions, or find there are

missing or damaged parts, we guarantee you complete satisfaction through

direct assistance from our factory. To avoid unnecessary delays, please call our

TOLL-FREE customer service number. Our Customer Service Agents will

provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]m

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN

IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF

35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO

RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY

OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches, two Allen Wrenches,

and one Flat Head Screwdriver.

NOTE: It is strongly recommended this machine to be assembled by two or more people to

avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Main Base Frame (#6) and Rear Lower Vertical Beam (#81) to the Rear Stabilizer

(#3). Align the holes then secure them with two M10 x 2 ½” Carriage Bolts (#42), two ∅¾”

Washers (#53), and two M10 Aircraft Nuts (#55).

B.) Attach the Rear Upper Vertical Beam (#1) to the Rear Lower Vertical Beam (#81). Secure it

with four M10 x ¾” Carriage Bolts (#83), ∅¾” Washers (#53), and M10 Aircraft Nuts (#55).

C.)Attach the Rubber Bumper (#38) to the Rear Upper Vertical Beam (#1). Secure it with one M6

x 5/8” Philips Screw (#41). DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Attach the Front Upper Vertical Beam (#5) to the Front Lower Vertical Beam (#82). Secure it

with two M10 x 2 ½” Carriage Bolts (#42), ∅¾” Washers (#53), and M10 Aircraft Nuts

(#55). DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach the Front Lower Vertical Beam (#82), both Left and Right Storage Posts (#15) & (#16)

to the Main Base Frame (#6). Secure them together with two M10 x 3” Carriage Bolts (#73),

∅¾” Washers (#53) and M10 Aircraft Nuts (#55). Do not tighten the nuts and bolts yet.

B.) Secure the upper portion of Left & Right Storage Posts to the Front Vertical Beam (#5) with

one M10 x 2 ½” Carriage Bolt (#42), ∅¾” Washer (#53), and M10 Aircraft Nut (#55).

C.) Attach the bottom of the Main Seat Support (#7) to the Main Base Frame (#6). Secure it with

one M10 x 2 ½” Carriage Bolt (#42), ∅¾” Washer (#53), and M10 Aircraft Nut (#55).

D.)Attach the Main Seat Support (#7) to the Vertical Beams (#5). Secure it with two M10 x 2

3/4” Carriage Bolts (#84), ∅¾” Washers (#53), and M10 Aircraft Nuts (#55).

E.) Attach two Olympic Sleeves (#69) to both Left & Right Storage Posts.

F.) Securely tighten all nuts and bolts previously installed.

DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Slide the Weight Holder (#2) onto the Rear Vertical Beam (#1) from the top.

B.) Attach the rear end of Upper Frame (#4) to the Rear Upper Vertical Beam (#1). Secure the

upper hole with a Small Bracket (#20), M10 x 2 3/8” Allen Bolt (#46), and ∅¾” Washer

(#53). Sure the bottom hole with a M10 x 2 3/8” Carriage Bolt (#43), ∅3/4” Washer (#53)

and M10 Aircraft Nut (#55).

C.) Place the Upper Frame (#4) on top of the Front Upper Vertical Beam (#5). Align the holes

and secure it with one Bracket (#21), two M10 x 2 ½” Carriage Bolts (#42), two ∅¾”

Washers (#53), and two M10 Aircraft Nuts (#55).

D.) Slide two Olympic Sleeves (#69) onto the Weight Holder (#2). Attach two Spring Clips (#65)

to the Olympic Sleeves. DIAGRAM 4

STEP 5 (See Diagram 5)

A.) Attach the Front Press Base (#12) to the Upper Frame (#4). Secure it with one 5 7/8” Axle

(#60), two ∅1” Axle Washers (#64), and two M10 Aircraft Nuts (#55). Do not over tighten

the nuts. Make sure the Base is able to swivel.

B.) Attach the Front Press Stopper (#8) and Butterfly Pulley Frame (#9) to the Front Upper

Vertical Beam (#5). Align the holes and secure them together with two M10 x 2 ½” Carriage

Bolts (#42), ∅¾” Washers (#53) and M10 Aircraft Nuts (#55).

C.) Insert the Lock Pin (#80) into the hole on the Front Press Stopper (#8) to lock the Base in

place. Note: Remove the Pin when doing Front Press exercise. Lock the pin when doing

Butterfly exercise. DIAGRAM 5

STEP 6 (See Diagram 6)

A.) Attach a Rubber Bumper (#38) to the Leg Developer (#11). Secure it with one M6 x 5/8”

Philips Screw (#41). Attach the Leg Developer to the bracket on the Main Seat Support (#7).

Secure it with one M10 x 3” Allen Bolt (#44), two ∅¾” Washers (#53), and one M10 Aircraft

Nut (#55).

B.) Insert the Arm Curl Stand (#67) into the top opening on the Main Seat Support. Use a Lock

Knob (#66) to secure it and obtain the desired Arm Curl exercise position. DIAGRAM 6

Indice

Altri manuali Impex Palestra domestica

Impex

Impex Marcy Platinum GS 99 Manuale utente

Impex

Impex MARCY CLASSIC MWM-977 Manuale utente

Impex

Impex IRONGRIP IGS-04 Manuale utente

Impex

Impex MARCY MWM-1100 Manuale utente

Impex

Impex COMPETITOR WM-343 Manuale utente

Impex

Impex MARCY SB-222 Manuale utente

Impex

Impex MARCY MWB-500 Manuale utente

Impex

Impex MWB-838 Manuale utente

Impex

Impex MARCY AB4000 Manuale utente

Impex

Impex MWM-981 Manuale utente

Impex

Impex Marcy Diamond MD-8861 Manuale utente

Impex

Impex MWB-20101 Manuale utente

Impex

Impex Marcy MWM-7119 Manuale utente

Impex

Impex MD-739 Manuale utente

Impex

Impex APEX AX-2109.1 Manuale utente

Impex

Impex POWERHOUSE ELITE PHE1000 Manuale utente

Impex

Impex Marcy Platinum MP-PWR10.0 Manuale utente

Impex

Impex Iron Grip Strength IGS-412 Manuale utente

Impex

Impex IGS-8860 Manuale utente

Impex

Impex IRON GRIP STRENGTH TSA-5761 Manuale utente

Impex

Impex AMZ-979RW Manuale utente

Impex

Impex IRON GRIP STRENGTH TSA-5762 Manuale utente

Impex

Impex MARCY DIAMOND ELITE MD PWR-8 Manuale utente

Impex

Impex MARCY PLATINUM MP 1100 Manuale utente

Manuali Palestra domestica popolari di altre marche

Horizon Fitness

Horizon Fitness OXFORD 6 Manuale utente

Energetics

Energetics Multi Trainer 5.1 Manuale utente

Matrix

Matrix MG-PL Series Manuale utente

Reebok

Reebok Tbr2i Manuale operativo e di manutenzione

Weider

Weider 8300 Hard Drive Manuale utente

Pure Fitness

Pure Fitness 8526HE Manuale utente

Weider

Weider 8700 I Guida rapida

Bowflex

Bowflex Sport 001-6961 Manuale utente

NordicTrack

NordicTrack E8200 Competition Bench Guida rapida

Weider

Weider WEMC10161 Manuale utente

Body Solid

Body Solid GHYP-345 Manuale utente

Evo

Evo TAHOE 5105 Manuale utente

cardiobull

cardiobull RA17 Manuale utente

ParaBody

ParaBody 40 Manuale utente

JLL

JLL Ventus Pro Air Power Manuale utente

Trojan

Trojan Colorado 370 Manuale utente

Octane Fitness

Octane Fitness xRide xR650 Manuale utente

Precor

Precor Discovery Series Manuale utente