Impression Products MAX-300 Manuale utente
Owner's Manual
Model#
MAX-300
1
MP3/CD Portable Player
Model Number : MAX-300
Table of Contents
1. GettingStarted 2
SafetyInstructions 2
PartsInstructions 3
PowerSources 6
2. UsingYourPlayer 7
PlayingMP3&NormalCD’s 7
PlayModes 8
Using the Program & Repeat Modes 9
UsingDirectories 10
Using Dir Program Mode 11
Using the Record Feature 11
3. Reference 12
Troubleshooting & Tips 12
Specifications & Accessories 13
WarrantyInformation 14
2
Chapter 1
Getting Started
Safety Instructions
Parts information
Power Sources
Safety Instructions
Storage:
Never use or store the player in cold, hot, humid, or dusty places.
Do not leave the cover open if the player is not being used for a long time.
Exposure to direct sunlight or extreme heat (such as inside a parked car for more than 2
hours) may cause damage or malfunction.
Usage:
Never attempt to play cracked or warped discs in the player as they may jam and damage
the player.
Avoid using the headphones/earphones at a high volume.
Road Safety:
Do not use the earphones while driving, cycling, or operating a motorized vehicle.
Carrying:
Please use the soft bag that comes with the player to protect it against scratches when not
in use.
3
Parts Instructions
1. Battery case (on the back of the player):
Holds two AA batteries
2. External 5v power socket:
For connecting the supplied AC power adapter.
3. Open button:
Press to open the disc cover.
Note: Do not open the cover while playing, or the player will be
Turned off automatically.
4. Disc cover
5. Headphone jack:
For connecting a set of headphones.
4
Parts Introduction
6. MIC jack:
For connecting a microphone (when using the Rec option)
7. Volume control:
Use to adjust the volume of the headphone. Does not affect the LINE OUT.
8. SOUND button:
Used to change sound settings:
Setting 1: Normal
Setting 2: Super Bass
Setting 3: Bass
Setting 4: Treble
Setting 5: Super Treble
9. Line out:
Line out for connection to an amplifier.
10. Stop button:
Press to stop playback of a track. When in DIR mode, press to return to the last
level directory.
11. Play/Pause button:
Press to turn on power and to begin to play when the power is turned off. Press to
pause while playing, and to continue playing when paused.
12. Fast forward:
Press once to skip to the next track. Press and hold to fast forward through the
current track.
13. Rewind:
Press once to return to the beginning of the track, and twice to play the previous
track. Hold down to rewind the current track.
14. LCD display panel:
Used to display working status.
5
Parts Instruction
15. PLAY MODE button:
Sets the playback mode (refer to Chapter 2 for detailed information).
16. REP/ENT button:
Sets repeat playback of CD and MP3 discs. Also used to enter in programming
status.
17. DIR/REC:
Use to toggle between DIR and FILE mode when playing the MP3 disk. In
recording status, use to record.
18. RESU/NOR/HOLD (Left/Center/Right):
RESU:Plays from where you stopped the last time.
NOR:Play from the beginning.
HOLD:Use to lock all buttons from accidental presses.
19. PLAYER/RECORDER switch:
Switches between player and recorder mode.
Power Sources
Using the AC Adapter:
First turn off the player, then plug the AC power adapter into the wall. Connect
the output jack of the adapter to the external power jack of the player.
Note:
Only use the supplied AC power adapter.
6
Power Sources
Using Batteries:
Insert two 1.5V AA batteries into the battery case.
Note:
Your player will be damaged if you try to charge non-rechargable batteries.
Take batteries (non-rechargable) out when the external power is being used.
Remove batteries if the player is not going to be used for a long time.
Do not mix new batteries with old ones.
Do not use Mn-Zn batteries.
Using Rechargable Batteries:
New batteries need to be charged before being used. When the batteries are weak,
the player will beep to remind you to charge the batteries.
Steps for Recharging the Batteries:
1. Turn off the player if it is playing.
2. Insert the batteries and plug in the AC power adapter.
3. Switch RESU/NOR/HOLD to HOLD, and press the PLAY button. Power
indicator in the LCD should flash and the “CHG” will display in the LCD.
The power indicator will stop flashing when the batteries are fully charged,
and the player will automatically turn off.
Note: If the batteries can only be used for short time after the charging, they can no
longer hold a charge. Please replace the batteries.
Charging time depends on the volume of the battery. The larger the battery
volume is, the longer the time it will take to charge. (Charging time of two 850-
mAH batteries is about three hours.)
If the battery is new, it may not be charged completely until you recharge it
several times.
To extend the life of the battery, recharge only when the battery is completely
discharged.
7
Chapter 2
Using your Player
Playing MP3 and Normal CDs
Play Modes
Using the Program and Repeat Modes
Using Directories
Using the Dir Program mode
Using the Record Feature
Playing MP3 and Normal CDs
Starting Playback:
Press PLAY to begin playback of a track.
Stopping Playback:
Hold STOP until “STOP” displays in the screen.
Fast Forward:
Hold down FORWARD to fast forward through the track.
Rewind:
Hold down REWIND to rewind through the track.
Next track:
Press FORWARD once
Previous track:
Press REWIND twice.
Note: If you what to skip several tracks, first press FORWARD or REWIND once and
hold it until the track you want is displayed in the LCD.
The player supports the sampling frequency of 32KHz, 44.1KHz and 48KHz. It can play
files up to 320kbps.
The player supports a maximum of 256 directories.
The player supports a maximum of 512 tracks.
Note: While playing MP3 CDs, the player will rearrange the tracks to reduce the
movement of the lens.
All of the play modes for the CDs can be used for MP3 CDs.
8
Play modes
Using the PLAY MODES button, you can select various modes of playback.
Continuous Playback:
1. Switch RESU/NOR/HOLD to NOR or RESU.
2. Switch PLAYER/RECORDER to PLAYER.
3. Press the PLAY button.
Note: When playing a scratched or dirty disc, press the DIR/REC button once to turn on
EPS.
One track playback:
To activate one track playback, press the PLAY MODE button until “1” displays in the
screen. After playing the track, “STOP” will display in the screen and the player will turn
off automatically.
Intro Playback:
To activate intro playback, press the PLAY MODE button twice until “INTRO”
displays in the screen. The player will play the first 10 seconds of each track. After
playing, “STOP” will display in the screen and the player will turn off automatically.
Random Playback:
To activate random playback mode, press the PLAY MODE button three times until
“RAND” displays in the screen. The player will play all the tracks in a random order.
After playing, “STOP” will display in the screen and the player will turn off
automatically.
Programming Playback:
To activate program playback mode, press the PLAY MODE button until “PROG”
displays in the screen.
9
Using the Program and the Repeat Modes
You can use the program mode to create a sequence of songs in a custom order.
1. Press FORWARD or REWIND to select the track number to program.
2. Press REP/ENT once to add the track to the sequence.
3. If you want to delete the last track you programmed, press REWIND until the
number decreases by one.
4. Press PLAY MODE to exit from Program mode.
5. After programming, press PLAY to play.
You can use the repeat mode to play the track, program, or CD until you stop the player.
Repeating a track:
1. Press PLAY MODES until “1” displays in the screen.
2. Press REP/ENT once and the LCD displays: 1
3. Press REP/ENT once again to cancel repeating. After playing the track, “STOP”
will display in the screen and the player will turn off automatically.
Repeating a disc:
1. Press PLAY MODES until “1” displays in the screen.
2. Press REP/ENT once and the LCD displays: 1
3. Press REP/ENT once again to cancel repeating. After playing the track, “STOP”
will display in the screen an the player will turn off automatically.
Repeating program:
1. Press REP/ENT to enter into Program Repeat mode during Program Payback.
The player will play the programmed track until turned off.
2. Press REP/ENT once again to cancel repeating. After playing the track, “STOP”
will display in the screen and the player will turn off automatically.
Indice
