4
DESCRIPTION
The In-Ex Spreader 165 is a ground-driven spreader designed for application of pelleted fertilisers. It can also
be used for application of other products such as grass seed and magnesium oxide. The uniquely designed
165-litre translucent non-corrosive polyethylene hopper is specially profiled for good product flow and ease of
filling. A high-quality stainless steel agitator and shutter ensures even flow of product to the spinner. A unique
spinner design ensures wide, even spread of product over 180 degrees (Urea). The heavy-duty galvanised
frame is fitted with chunky turf tyres as standard. The drive train uses high quality steel and a double sealed
self-aligning bearing and heavy-duty gearbox for maximum durability. The drive can be disconnected using a
convenient pin clutch. The dual control levers allow instant setting of product feed rate and product control.
Specifications
(Specifications subject to change without notice)
Dry Weight 75 Kg
Dimensions W1340mm, H1275mm, L1400mm
Capacity 165 litre (130Kg Urea)
Drive Ground driven (single wheel)
Wheels 18x950x8 Chunky turf tyres
Tyre Pressure 12 PSI
Clutch Removable Pin
Control Adjustable stainless steel slide with index handle
Agitator Mechanical arm, stainless steel
Spinner Galvanised steel with three-position adjustable vanes
Hopper Non-corrosive polyethylene, ergonomically designed for ease of filling and inspection
Hopper Cover Lightweight polypropylene fabric
Frame Galvanised steel
Gearbox Heavy duty with double sealed bearings
Gearbox oil 300ml SAE30
Axle Bearings Sealed ball races
Axle grease General Purpose
Application Rate 100Kg per hectare @ 10 kph (nominal, Urea)
Spread width 12M (nominal, Urea @ 15 Kph)
Towing speed 15 Kph (Maximum recommended)
Order Information
In-Ex Spreader 165 part number: 3006
WARRANTY
1WARRANTY AND LIABILITY
Use of the equipment
1.1 You must satisfy yourself as to the suitability of the equipment for your intended use(s) of the
equipment.
Your relationship with the retailer
1.2 Where you consider you have a warranty claim (or any other claim) in relation to the
equipment, you must contact the retailer who sold you the equipment, not C-Dax directly. The
retailer is responsible for liaising with C-Dax in respect of your claim.
Warranty
1.3 C-Dax warrants to the original purchaser that the equipment is sold free from defects in
materials and workmanship for a period of 12 months from date of first retail sale (6 months
from date of first retail sale if the equipment is sold in the U.K.) subject to the terms set out
below.
1.4 C-Dax will at its option repair or replace the defective equipment (or part of the equipment) or
notify the retailer of the equipment to refund the purchase price for such defective equipment
to you in the event of a breach of this warranty, subject to the terms set out below.
