in2digi D-JV-2 Manuale utente
NOTE:
Antenna placement, cable routing and grounding is critical in any DAB
installation.
Please ensure you carefully read all installation documentation and
referenced instructions (stored at www.in2digi.com website).
Step 4
The DAB module needs to be added into the Infotainment fibre optic ring.
All required joiner parts are supplied with the product.
Please refer to documentation “DAB Module Ring Optics” for details.
Step 1
If the installation of the in2digi module is as a replacement to
upgrade the vehicle from an OEM fitted DAB to DAB+ functionality
then no further vehicle configuration update is required.
For a new installation then a vehicle configuration update is required
– see Appendix 1.
This process usually needs to be completed by a JLR dealer.
Finalisation:
Ensure that the correct module firmware version is loaded for the target vehicle
application.
With steps 1 to 4 complete then the system is ready to be run.
If required, please refer to document “Clearing the DAB Station List (for non UK
markets)” for details.
It is always advisable to check that the module has the latest firmware version loaded.
Please refer to document “D-JV-2 Firmware Version Read Process” for details on how
to check the version
Step 2
Install the antenna as directed by the manufacturer’s instructions.
**The in2digi installation documentation offers guidance for positioning.
Final vehicle placement rests with the fitter and should support optimal
reception performance.
Route the antenna cable to the DAB module ensuring that it does not
obstruct any potential air bag deployment.
Stow any excess cable carefully ensuring that any cable bend has at
least a 10mm radius.
Installation Instructions for
in2digi D-JV-2 Series
Di
g
ital Radio
Product Information
DAB Module
in2digi D-JV series
MOST
Head Unit
(IAM)
Rest of the
MOST network
ring
Step 3
The DAB module fitment positioning (suggested solutions for differing
vehicle platforms follows) has an associated dependency for power
selection.
Please refer to document “JLR DAB Module Power” for details.
Antenna
DAB UNIT
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Range Rover Model Year (2010 to 2012)
NOTE:
This vehicle platform utilises Gen1 firmware. Confirmation of system is gained with reference to document “in2digi - JLR Vehicle Data”
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Advised fitment location for the DAB unit and antenna
* Ensure that antenna placement does not interfere with the reception of other
radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then ensure that it does
not have a heating element. With a fitted heating element then the antenna
must be fully contained within the element free area adjacent to the A-pillar
– care must be applied for such placement.
1
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Range Rover Model Year (2013 to 2016)
NOTE:
This vehicle platform utilises Gen2.1 firmware. Confirmation of system is gained with reference to document “in2digi - JLR Vehicle Data”
This refreshed vehicle platform may not have an available optical ring connection in the rear luggage space
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Gen2.1 S
y
stem
Advised fitment location for the DAB unit and antenna
1. Easiest location is in the front footwell / windscreen
2. Alternative location is rear RHS luggage space /
quarter glass
* Ensure that antenna placement does not interfere with the
reception of other radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then
ensure that it does not have a heating element. With a
fitted heating element then the antenna must be fully
contained within the element free area adjacent to the
A-pillar – care must be applied for such placement.
22
11
DAB UNIT
NOTE:
This vehicle platform utilises Gen1 firmware. Confirmation of system is gained with reference to document “in2digi - JLR Vehicle Data”
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Advised fitment location for the DAB unit and antenna
* Ensure that antenna placement does not interfere with the reception of other
radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then ensure that it does
not have a heating element. With a fitted heating element then the antenna
must be fully contained within the element free area adjacent to the A-pillar
– care must be applied for such placement.
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Range Rover Sport Model Year (2010 to 2012)
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Range Rover Sport Model Year (2013 to 2016)
NOTE:
This vehicle platform utilises Gen2.1 firmware. Confirmation of system is gained with reference to document “in2digi - JLR Vehicle Data”
This refreshed vehicle platform may not have an available optical ring connection in the rear luggage space
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Gen2.1 S
y
stem
Advised fitment location for the DAB unit and antenna
1. Easiest location is in the front footwell / windscreen
2. Alternative location is rear RHS luggage space /
quarter glass
* Ensure that antenna placement does not interfere with the
reception of other radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then
ensure that it does not have a heating element. With a
fitted heating element then the antenna must be fully
contained within the element free area adjacent to the
A-pillar – care must be applied for such placement.
11
2
DAB UNIT
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Land Rover Discovery Model Year (2010 to 2012)
NOTE:
This vehicle platform utilises Gen1 firmware. Confirmation of system is gained with reference to document “in2digi - JLR Vehicle Data”
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Advised fitment location for the DAB unit and antenna
* Ensure that antenna placement does not interfere with the reception of other
radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then ensure that it does
not have a heating element. With a fitted heating element then the antenna
must be fully contained within the element free area adjacent to the A-pillar
– care must be applied for such placement.
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Land Rover Discovery Model Year (2013 to 2015)
NOTE:
This vehicle platform utilises Gen2.1 firmware. Confirmation of system is gained with reference to document “in2digi - JLR Vehicle Data”
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
DAB UNIT
Advised fitment location for the DAB unit and antenna
* Ensure that antenna placement does not interfere with the reception of other
radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then ensure that it does
not have a heating element. With a fitted heating element then the antenna
must be fully contained within the element free area adjacent to the A-pillar
– care must be applied for such placement. Gen2.1 S
y
stem
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Land Rover Freelander 2 Model Year (2009 to 2012)
NOTE:
This vehicle platform utilises Gen2 firmware.
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Advised fitment location for the DAB unit and antenna
- Rear Quarter Glass
* Ensure that antenna placement does not interfere with the reception of other
radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then ensure that it does
not have a heating element. With a fitted heating element then the antenna
must be fully contained within the element free area adjacent to the A-pillar
– care must be applied for such placement.
FM
DIGITAL
Head Unit MUST have this button identification
for applicability to upgrade to DAB
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Land Rover Freelander 2 Model Year (2013 to 2015)
NOTE:
This vehicle platform utilises Gen2.1 firmware.
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Advised fitment location for the DAB unit and antenna
- Rear Quarter Glass
* Ensure that antenna placement does not interfere with the reception of other
radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then ensure that it does
not have a heating element. With a fitted heating element then the antenna
must be fully contained within the element free area adjacent to the A-pillar
– care must be applied for such placement. Low Line S
y
stem
(
GS
)
Product Information
Installation of in2digi D-JV-2 Series Unit and Antenna
Range Rover Evoque Model Year (2012 to 2015)
NOTE:
This vehicle platform utilises Gen2.1 firmware. Confirmation of system is gained with reference to document “in2digi - JLR Vehicle Data”
Disclaimer – in2digi accept no liability for non optimal system performance resulting from any installation
Advised fitment location for the DAB unit and antenna
1. Easiest location is in the front footwell / windscreen
2. Alternative location is rear RHS luggage space /
quarter glass
* Ensure that antenna placement does not interfere with the
reception of other radio bands or TV (if fitted)
** If the windscreen is selected for antenna placement then
ensure that it does not have a heating element. With a
fitted heating element then the antenna must be fully
contained within the element free area adjacent to the
A-pillar – care must be applied for such placement.
1
2
Gen2.1 S
y
stem
Altri manuali per D-JV-2
2
Indice
