17 18
PRESET
PROGRAMS
PRESET
PROGRAMS
PRESET PROGRAMS
Preset Programs
●Eight automatic programs provide massages to relieve or soothe fatigue.
●
With the Preset Program buttons, you can choose your favorite program, which gives you a massage according
to preset menus.
Various Adjustments
Changing Courses
Before the course in progress finishes, you can change it to another course. After a total duration of 30 minutes, the course in
progress stops even if not completed.
Switching from One Preset Program in Progress to Another
When one Preset Program button is pressed while another Preset Program is in progress, the rollers return to their storage
positions, then the selected program starts from Automatic Shiatsu Point Locator operation.
Switching from a Preset Program to Manual Selection Mode
When one of the buttons for Manual Selection Mode located behind the panel of the remote control is pressed while a Preset
Program is in progress, the Preset Program immediately stops, and the selected operation starts with the Automatic Shiatsu
Point Locator operation. To select an air massage or back vibration operation, press the POWER button to stop the preset
program in progress before the selection.
Stopping in the Middle of a Massage
To stop mid-massage, press the POWER button. The rollers will return to their storage positions and stop.
In an emergency or if there is some malfunction during operation of the chair, press the STOP button. The rollers will stop
immediately. After confirming safety, press the POWER button. The rollers will return to their storage positions and stop.
Caution ●If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If this
solution does not work, stop using and contact the vendor.
→May result in injury if you continue use with high stimulation under such circumstances.
●Do not place hands or feet into the roller tracks, into the space between the seat back and the seat or into
the moving parts. Do not sit wearing hard objects, such as hair accessories, necklace, watch, bracelet, or ring.
●If your leg or foot comes out of the leg rest during the massage, do not try to force it back in.
■AIR INTENSITY Button
For adjusting the intensity of air pressure in 3 settings (high, medium, and
low) during Preset Programs, use [+] or [-].
The intensity of air massage is initially set to Medium.
(The intensity of air massage for the Youth Program is initially set to Low.)
* If the program is changed, the intensity of air massage is reset to its initial
setting (MED).
■VIBE OFF Button
The vibration function included in a program can be canceled with the
VIBE OFF button, according to your preference.
To reactivate the vibration function, press the VIBE OFF button again.
Caution ●Keep massage sessions to no more than 15 minutes in length. Area Specific Massage of any particular area
on the body to no more than 5 minutes.
→Continual use for extended periods of time can result in over-stimulation, which could cause the opposite
of the desired effect, or even injury.
Set 30 minutes in total for reference per day and keep appropriate intervals between each massage
session.
* For children aged 14 years or over, use only the Youth Program and only one session per day.
❶Press the POWER button.
If no selection is made within 5 minutes,
the power is automatically shut off.
❷
Press the desired button.
The selected program will be indicated
in the display.
* The Automatic Shiatsu Point Locator starts
locating Shiatsu points.
The Automatic Shiatsu Point Locator is not
available during Full-Body Air Program and
DreamWave Program.
Note For accurate Shiatsu Point location,
always sit as far back as possible and
place your head on the Shoulder
Massage Unit.
❸
The ROLLER positions can
be adjusted.
With the ROLLER buttons, the vertical
position of the rollers can be adjusted.
If no adjustment is required, do not use
these buttons.
❹
The program starts.
The progress of the program is indicated
on the display of the remote control with
the program name.
❺
Program completed.
When the massage program finishes, the
rollers return to their storage positions
(upper part of the seat back).
Then the power to the remote control is
shut off. However, reclining of the seat
back and angle adjustment of the leg
rest are still enabled.
■Air Massage Buttons
The intensity of air massage can be adjusted by area.
Each time the button located behind the panel of the remote control
is pressed, the intensity changes in the order of High, air massage
canceled, Low, then Medium
.
* Air massage cannot be canceled for the programs that include stretch or
DreamWave motions or during Full-Body Air Focus Program.
* If the program is changed, the intensity of air massage is reset to its initial
setting (MED).
■Back Vibe Button
The intensity of a back vibration operation can be adjusted with the Back
Vibe button located behind the panel of the remote control. The intensity
of back vibration is initially set to High.
(The intensity of the back vibration operation for the Young Program is
initially set to Low.)
Each time the button is pressed, the intensity changes in the order of
vibration canceled, Low, and High.
■AIR OFF Button
For canceling air massage during Preset Programs, use this button.
* Air massage cannot be canceled for the programs that include stretch or
DreamWave motions or during Full-Body Air Focus Program.
