Inbody 770 Manuale utente

User’s Manual

ⓒ

Biospace Co., Ltd. [HEAD OFFICE]

Biospace Bldg., 54, Nonhyeon-ro 2-gil, Gangnam-gu, Seoul 135-960 KOREA

TEL: +82-2-501-3939

FAX: +82-2-578-2716

Website: http://www.inbody.com

E-mail: info@inbody.com

Reproduction, adaptation, or translation of this manual is prohibited without prior written consent from Biospace Co., Ltd

under the copyright laws. This manual might have typographical errors, and its content can be changed without

a prior notice. Biospace Co., Ltd shall not be liable for any errors, incidental, or consequential damages that

occurred by not complying with the content of the User’s Manual.

Visit our website http://www.inbody.com to view and download further information about the functions of the

InBody770, the explanation of results output, and more. Biospace Co., Ltd reserves the right to modify the appearance,

specifications, and etc. of the InBody770 to improve the quality of the product, without prior notice for reasons of

performance improvement.

Please note the important information below before reading this manual.

Failure to comply with safety warnings and regulations can cause serious injury or death.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Failure to comply with safety cautions and regulations can cause injury or property damage.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Warning

Caution

Customer Service Information

Biospace, Inc. [USA]

13850 Cerritos Corporate Dr., Unit C, Cerritos, CA 90703, USA

TEL: +1-323-932-6503 FAX: +1-323-952-5009 Website: http://www.biospaceamerica.com E-mail: [email protected]

Biospace Japan Inc. [JAPAN]

Second Floor Ayabe Bldg., 2-17-3 Sotokanda, Chiyoda-ku, Tokyo JAPAN

TEL: +81-03-5298-7667 FAX: +81-03-5298-7668 Website: http://www.inbody.co.jp E-mail: inbody@inbody.co.jp

EU Representative. [EUROPE]

DongBang Acuprime. 1 Forrest Units, Hennock Road East, Marsh Barton, Exeter EX2 8RU, U.K

TEL: +44-1392-829500 FAX: +44-1392-823232 Website: http://www.inbody.com E-mail: [email protected]

Biospace China. [CHINA]

904, Xing Di Plaza, No. 1698 Yishan Road, Shanghai, 201103, CHINA

TEL: +86-21-64439738, 9739, 9705 FAX: +86-21-64439706 Website: http://www.biospacechina.com E-mail: info@biospacechina.com

Australian Sponsor. [AUSTRALIA]

Emergo AUSTRALIA. Level 20, Tower II, Darling Park, 201 Sussex Street, Sydney, NSW 2000, AUSTRALIA

TEL: +61-2-9006-1662 FAX: +61-2-9006-1010 Website: http://www.emergogroup.com E-mail: [email protected]

User’s Manual Contents

I. InBody 770 Installation

A. Product Components

B. Operating Environment

C. Installation Instructions

D. Initial Setup

E. Connecting Printer, Stadiometer,

Blood Pressure Monitor, and Barcode Reader

F. Maintenance

II. InBody Test

A. Precautionary Steps

B. Test Instructions

C. Test Posture

III.

Transportation and Storage

A. Cautions during Transportation

B. Repacking Instructions

C. Transportation and Storage Environment

IV.

Frequently Asked Questions (FAQ)

A. Regarding the InBody

B. Regarding the InBody Test

V. Others

A. Exterior and Functions

B. Safety Information

C. Classication

D. Specications

I. InBody770 Installation

A. Product Components

The InBody770 consists of the following components. Please make sure all of the following components are

present.

* Please inspect each component of the InBody770 for defects prior to installation.

➊

InBody770

➋

Adapter (DC 12V, 3.4A) 1 EA

➌

Power cord 1 EA

➍

User’s Manual 1EA

➎

Hexagonal Wrench

➏

Hinge Cover

Hand electrodes

Keypad

Upper part

Footplate

Foot electrodes

➊

➍

➌

➎

➋

➏

➊

B. Operating Environment

Please make sure that the environment is adequate for the InBody770 installation. This equipment is designed

for indoor use. If installing outdoors, the following requirements must be fullled.

C. Installation Instructions

1. Open the packing box of the InBody770 and remove the packing pads. Then take the InBody770 out of the box.

•

If you have any problems installing your InBody770, please contact BIOSPACE for assistance.

•

Do not transport the equipment by holding the screen portion or the joints of the hand electrodes.

•

Keep the packing materials provided for repacking the equipment in the future. Other wastes should be

disposed of according to relevant laws and regulations.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Caution

Temperature range 10 ~ 40℃ (50 ~ 104℉)

Relative humidity 30 ~ 75% RH

Atmospheric pressure 70 ~ 106kPa

Polyethylene foam cover

Packing pads

•

Using the InBody770 on carpet may cause static electricity, which could damage the equipment. If installing

the InBody770 on carpet is unavoidable, please use an antistatic mat.

•

Install the InBody770 on a leveled, non-vibrating surface. Installing the equipment on an uneven surface may

cause the examinee to fall down. Test results may also be inaccurate.

•

Never clean the hand and foot electrodes with liquid spray or detergent directly. The equipment may corrode

and/or malfunction if the liquid or detergent leaks inside. Use the InBody Tissue when cleaning the InBody770.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Caution

* Please refer to the following illustrations to properly transport the equipment.

2. After completely raising the upper part of the InBody770, remove the polyethylene foam cover. Then remove

the packing material from the footplate.

5. Completely raise the upper part of the InBody770.

Packing material

3. Slightly lower the upper part of the InBody770 and remove the packing bands, which are used to connect the

leveling screws and the hand electrode cables.

•

Do not use a knife or scissors to remove the packing bands. Keep packing bands for repacking the InBody

in the future.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Caution

Leveling screws

Packing Bands

4. Please refer to the following illustrations to remove the Packing Bands from both hand electrode cables.

6. Tighten the hexagonal screws, on the InBody770 joint, by rotating the Hexagonal Wrench clockwise.

7. Please refer to the following illustrations to insert the Hinge Cover.

8. Level the InBody770 by rotating the leveling screws under the footplate to the left and right so that the

air bubble is centered.

* Leveling the equipment is necessary for accurate measurement of weight. There are a total of 5 leveling screws.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Caution

•

Avoid injuring your hands when rotating the leveling screws under the footplate.

Leveling screws under the footplate

Leveled

Not leveled

Level Indicator

Hexagonal screws

9. Connect the adapter (➋) to the power input port, which is located on the rear panel (➊). Connect the adapter (➋)

to the power cord (➌). Plug the power cord (➌) into a grounded 3-socket outlet.

* The InBody770 can be used in connection with other test equipment such as a stadiometer, a blood pressure monitor, or data management

software called Lookin’Body120. For more information, please refer to ‘A. Exterior and Functions 3. Rear Panel’ in section ‘V. Others’

in this User’s Manual.

•

Do not place the InBody770 in a location making it difficult to disconnect the power cord.

•

Do not plug in or pull out the power cord with wet hands. There is a risk of an electric shock.

•

Always use an outlet connected to the rated power (AC 100 - 240 V). Using other power rated outlets may result

in fire or malfunction.

•

When using a power surge protector, make sure that the outlet or the extension cable has adequate power capacity.

•

Do not disassemble or modify the equipment including internal parts without written consent from the

manufacturer. This may cause electric shock or injury, product malfunction, inaccurate results, and will void the

manufacturer’s warranty.

•

Do not directly contact the InBody770 with any other electronic device when the InBody770 is on.

This may result in an electric shock.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Warning

Power input port

➊

Rear panel

➌

➋

Grounded outlet

3-socket outlet

• If the InBody770 is not plugged into a grounded outlet, it may cause damage through electric surges or

product malfunction. This may affect the test results.

• The test results may be inaccurate if the InBody770 is under electrical interference. Do not install the InBody770

near products that generate electrical interference such as fluorescent lights, large AC motor equipment

(treadmill, vibration plate, refrigerator, air-conditioner, compressor, etc.), high-frequency thermal therapy

equipments, or heating appliances. Do not share the power source of the InBody770 with other electrical

devices. This may affect the test results.

• When connecting the InBody770 with other test equipment, turn on the other equipment first. When

turning off other equipment, turn off the InBody770 first. This is necessary to minimize electrical surges on the

InBody770.

• Always use the specified adapter provided by BIOSPACE as it is a part of the InBody770. Using other adapters

may result in malfunction of the InBody770.

• Operation of the InBody770 2,000m above sea level may affect the weight measurement.

DANGER

NOTECAUTION

참 조 주 의참 고 주 의

Caution

10. Flip the power switch to turn on the InBody770.

Power switch

D. Initial Setup

1. The InBody770 automatically starts booting when it is turned on. While booting, it performs a self weight

calibration.

* While booting (about 5 minutes), make sure there is nothing on top of the footplate. Please do not stand on the footplate, or

place objects on the footplate.

2. Press the [Administrator Menu] button on the screen, which appears when no one is on the footplate.

3. Input the password (default password: 0000) to access the Administrator Menu.

4. The Administrator Menu will give you access to ‘Setup’ and ‘Troubleshooting’.

* If you store the contact information for Customer Service under ‘24. Customer Service Information’ in Setup of

the Administrator Menu, you can refer to it when you have a question or a problem with the InBody770.

Administrator Menu

Setup Troubleshooting

Altri manuali per 770

Indice

Manuali Ellittica popolari di altre marche

Weslo

Weslo Momentum 4.0 Elliptical Manuale operativo e di manutenzione

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manuale utente

Torque Fitness

Torque Fitness XPLLP Manuale utente

Octane Fitness

Octane Fitness PRO3700C Manuale utente

Xterra

Xterra FS5.8e Manuale utente

Bodyguard

Bodyguard E-40 Manuale utente

Bonn Germany

Bonn Germany Concept 2.2 Manuale utente

Precor

Precor Resolute RSL 620 Manuale utente

NordicTrack

NordicTrack E 9.2 Elliptical Manuale utente

Vision Fitness

Vision Fitness X6600iNetTV Manuale utente

Matrix

Matrix MX-A5x Manuale utente

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manuale utente

Sears

Sears FREE SPIRIT C249 30737 0 Manuale utente

True

True FS-64 Manuale utente

Sport-thieme

Sport-thieme ST 310 Manuale utente

VIRTUFIT

VIRTUFIT CTR 1.1 Manuale utente

Kettler

Kettler GIRO C 1 Manuale utente

CIRCLE FITNESS

CIRCLE FITNESS E7 Manuale utente

inbody 770 Manuale utente

Manuali Ellittica popolari di altre marche