Indumicro IMO-A080 Manuale utente
1
User Manual
IMO-A080
Open Frame Monitor
2
Warning!
___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Disclaimer
This information in this document is subject to change without notice. In no event shall
Indumicro.com be liable for damages of any kind, whether incidental or consequential,
arising from either the use or misuse of information in this document or in any related
materials.
Electric Shock Hazard – Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.
___________________________________
Table of Contents
Chapter 1: Getting Started
1.1 Features…...……………………………………………………….…..…..…1
1.2 Specifications…………………………………………....……………...….1
1.3 Dimensions…………...………………………...………………………….…2
1.4 Brief Description......................................................................................3
1.5 Display Mode………...……………………………………………………….3
Chapter 2: On Screen Display (OSD)
2.1 Back Side Controls……………………………………………….…..…….4
2.2 OSD Controls…………………..……………………………………………..5
2.3 Main Menu …..………..……………………………………………………..6
Chapter 3: Installation
3.1 Configuring PenMount Windows 2000/XP/Vista/7 Driver
Chapter 4: Software
4.1 Software Functions………………………………………………………..17
4.2 Software Function Descriptions……………………………………….…18
……………..6
1.1 Features
8” SVGA color TFT LCD display
Optional resistive touch screen
1.2 Specifications
Display
Display: 8” SVGA color TFT LCD display
Maximum resolution: 800 x 600
Maximum colors: 256K
Luminance: 350 cd/m²
Viewing angle: 30°(H/V)
Backlight life: 40,000 hours
OSD control: Yes
Touch screen: analog resistive
OS compatibility: Win 95/98, XP, 2000, NT4.0, Vista, 7, QNX, Linux
Power Supply: 12V DC @0.9A
Mechanical
Construction: steel chassis
Input signal: analog RGB
OSD on the rear side
Dimensions: 208 x 148 x 42mm (W x H x D)
Gross Weight: 1.1 kg
Chapter 1: Getting Started
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Environmental
● Operating temperature: 0 to 50oC (32 to 113oF)
● Storage temperature: -20 to 60oC (-4 to 140oF)
● Relative humidity: 10 to 95% @40oC, non-condensing, without touch screen
●Vibration: 1G peak, 5~500Hz (at random)
●Shock: 15G peak acceleration (11 msec.duration)
●EMC: Meet CE, FCC Class A
1
IMO-A080 User Manual
1°/
(optional)
120
Steel chassis
OSD on the rear side
●
●
Ordering Information
IMO-A0808” SVGA Open frame monitor
12V/60W External power adapter
Chapter 1: Getting Started
1.3 Dimensions
2
IMO-A080 User Manual
IMO-A080T 8” SVGA Open frame monitor with resistive touch screen
Option
IMO-AOVDC Upgrade to 11~32VDC power input and DVI-D input
Power Connection for IMO-AOVDC
Front and back view of the IMO-A080
1.5 Display Mode
Display Mode Hori. Sync (KHz) Vert. Sync. (Hz)
31 60
VGA 640 x 480 38 72
75
56
SVGA 800 x 600 38 60
72
75
60
XGA 1024 x 768 56 70
75
1152 x 864 68 75
64
SXGA
1280 x 1024 80
38
35
48
47
48
60
60
75
The IMO-A080 open frame monitor featuresan excellent viewing ability for monitoring and control
applications. It is available with resistive touch screen that is easy to use and maintain.
1.4 Brief Description of the IMO-A080
Chapter 1: Getting Started
3
IMO-A080 User Manual
2.1 Back side OSD Functions
Auto Adjust Up/Left Down/Right Power
Menu/Entry Power Indicator
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: Toenter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)
the buttons until the AC power cord is connected and the “RGB” appears on the top leftcorner
of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the button and don’t let them go) until the AC power cord is
connected. Please don’t let your fingers go until the AC power cord is connected again and the
wording of “RGB” appears on the top left corner of your screen, and wait for 3 seconds. Under the
non-signal entry situation, if is seen, exit is thus successfully made.
Cable Not Connected
Chapter 2: On Screen Display (OSD)
4
IMO-A080 User Manual
2.2 OSD Controls
To make any adjustment, select the following:
1. Press (Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
3. Press (Menu) and then choose the item with the ( / or +/-) key.
4. Press (Menu) and then adjust the quality with the ( / or +/-) key.
1.) If the “RGB” is still on the top leftcorner of the screen, press to enter “Miscellaneous” and
choose “Reset”, and then Yes, and press . When the screen goes black, disconnect power
and repeat the above steps.
2.) If the “RGB” is not found, disconnect the AC power cord first. Then press the buttons
(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When
“RGB” appears, repeat the above steps.
3.) Functions of OSD Keys
Chapter 2: On Screen Display (OSD)
5
IMO-A080 User Manual
2.3 Main Menu
In the Colour menu, there are the following items:
zContrast
zBrightness
zGamma Correct
zColour Adjust
zExit
For Picture, check out the following:
zH. Position: Shifts picture left or right
zV. Position: Shifts picture up or down
zSharpness: Fine-tuning of image sharpness
zPhase: Allows to fine-tune display quality
zExit
For Function, check out the following:
zAuto Adjust
zAuto Position
zAuto Phase
zAuto Clock
zAuto Colour
Chapter 2: On Screen Display (OSD)
zExit
6
IMO-A080 User Manual
Chapter 2: On Screen Display (OSD)
In the OSD menu, there are the following items:
zLanguage
zOSD H. Position
zOSD V. Position
zOSD Timer
zTranslucent
zExit
For Miscellaneous, check out the following:
zSignal Source
zModel Select
zReset
zVolume
zExit
7
IMO-A080 User Manual
Indice
Altri manuali Indumicro Monitor
