iNetVu Fly-1201 Manuale utente
iNetVu®Fly-1201 User Manual
The iNetVu®brand and logo are registered trademarks of C-COM Satellite Systems, Inc.
© Copyright 2006 C-COM Satellite Systems, Inc.
1-877-iNetVu6
www.c-comsat.com
Revision 006
March 25, 2015
C-COM Satellite Systems Inc. Page 2 of 47
iNetVu®Fly-1201 User Manual
This page is intentionally left blank.
C-COM Satellite Systems Inc. Page 3 of 47
iNetVu®Fly-1201 User Manual
Copyright © 2008. All rights reserved. C-COM Satellite Systems Inc.
This document contains information, which is protected by copyright. All rights reserved.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as
followed under the copyright laws.
Both the iNetVu®and C-COM names and logos are registered trademarks of C-COM Satellite
Systems Inc.
Intel®Pentium is a registered trademark of Intel Corporation. Microsoft, Windows, Windows NT
and MapPoint are registered trademarks of Microsoft Corporation.
All other product names mentioned in this manual may be trademarks or registered trademarks of
their respective companies and are the sole property of their respective manufacturers.
C-COM Satellite Systems Inc. Page 4 of 47
iNetVu®Fly-1201 User Manual
Table of Contents
1. Introduction ............................................................................................................5
1.1. About This Manual ............................................................................................5
1.2. System Overview ..............................................................................................5
1.3. Power Consumption..........................................................................................6
2. Physical Outline .....................................................................................................7
3. Clearance Requirements .......................................................................................8
4. Assembly and Disassembly ..................................................................................9
4.1. Assembly Procedure .........................................................................................9
4.2. Disassembly Procedure ..................................................................................19
4.3. Closing and locking Cases ..............................................................................28
5. System Connectivity............................................................................................29
5.1. Typical Connection –PC Free.........................................................................29
5.2. Network/Web Interface Connection.................................................................30
5.3. Typical USB Communication Interface ............................................................31
5.4. System Diagram with Splitter ..........................................................................32
5.5. Router Configuration Example ........................................................................33
5.6. Modem Independent Setup (Stand Alone) ......................................................34
5.7. Using Modem COM Port .................................................................................35
6. iNetVu®7024 Controller Configuration ...............................................................36
6.1. Software Initial Configuration and Verification .................................................36
7. Appendix...............................................................................................................41
7.1. Azimuth & Elevation Manual Movements: .......................................................42
7.1.1. Azimuth –Manually Moving the AZ Axis ..................................................42
7.1.2. Elevation –Manually Moving the EL Axis.................................................43
7.2. Appendix 1: Transportable Cases Features and Specifications.......................44
7.3. Appendix 2: Default Limits and Configuration Data Tables..............................45
7.4. Appendix 3: Fly-1201 ABCD Dimensions ........................................................46
7.5. Appendix 4: Declaration of Conformity ............................................................47
Proprietary Notice: This document contains information that is proprietary and
confidential to C-COM Satellite Systems, Inc., and is intended for internal and or
C-COM Satellite Systems Inc. authorized partners use only. No part of this
document may be copied or reproduced in any way, without prior written
permission of C-COM Satellite Systems, Inc.
C-COM Satellite Systems Inc. Page 5 of 47
iNetVu®Fly-1201 User Manual
1. Introduction
1.1. About This Manual
This manual explains the iNetVu®Fly-1201 Flyaway System Installation and Operation.
An electronic version of this manual is included on the iNetVu®CD that came with your
system.
1.2. System Overview
Equipped to work with the iNetVu®7024 Series Controller, the iNetVu®Fly-1201 Flyaway
antenna is an easily assembled, rugged and reliable product for automatic satellite
acquisition. This antenna is a rapidly deployable unit that is ideal for applications that
require satellite communication over Ku-Band. The Flyaway empowers users with the
ability to stop anywhere there exists satellite coverage and access Internet at broadband
speeds.
The 1.2M Fly-1201 System comes with a protective case that has been designed to be
airline checkable. Without the use of any tools, the Flyaway could be field assembled
and operational in less than 10 minutes by one person.
Fig. 1: iNetVu®1201 Flyaway
C-COM Satellite Systems Inc. Page 6 of 47
iNetVu®Fly-1201 User Manual
1.3. Power Consumption
Minimum Power Consumption: 10W (when system is idle. i.e Controller with
possible LNB powered).
Maximum Power Consumption: 24 @ 3.5A = 84W
Controller AC Universal Input: 90 ~ 264 VAC, 47 ~ 63 Hz
The iNetVu®Fly-1201 Flyaway system offers the following additional capabilities and
features:
3-Axes DC motor drive system
Highly reliable linear actuator to control elevation
Satellite acquisition within 5 minutes (under normal operating conditions)
Compatible with any configured satellite over the Ku Band
Fully automatic, software controlled satellite acquisition
Optimized signal reception and transmission
Self-calibrating and tuning after satellite acquisition
Stand Alone –Satellite Acquisition via DVB (modem independent)
Integrated with some of the leading satellite service providers available.
Easily assembled, light-weight carry gear
C-COM Satellite Systems Inc. Page 7 of 47
iNetVu®Fly-1201 User Manual
2. Physical Outline
2-piece
Detachable reflector
Feed Arm
Polarization
Assembly & Motor
Feed Horn
Elevation Motor
Azimuth Motor &
Gear
(3) Support Legs
BUC
Can also go here
C-COM Satellite Systems Inc. Page 8 of 47
iNetVu®Fly-1201 User Manual
3. Clearance Requirements
Fig. 2: Clearance requirements for the iNetVu®Fly-1201 Platform
C-COM Satellite Systems Inc. Page 9 of 47
iNetVu®Fly-1201 User Manual
4. Assembly and Disassembly
4.1. Assembly Procedure
Support Stand and EL Feed Arm Support plate Assembly
1) Remove AZ Assembly from the case and place it down with the leg grooves pointing
to the sky as depicted in the image.
2) Remove (3) legs from the case and install. One of the legs will have a label on it; this
leg should be installed at the 130 degree marking on the AZ base. The AZ base will
also have stickers indicating the install location of the back leg.
C-COM Satellite Systems Inc. Page 10 of 47
iNetVu®Fly-1201 User Manual
3) Flip the AZ assembly over so it is sitting (like a tripod) on all (3) legs; the leg with the
label (back leg) should be pointing North (if located in Northern Hemisphere) and
South (if location is in the Southern Hemisphere).
4) Remove EL Feed Arm Support plate, fold arm brackets out as depicted in the image.
Back Leg
Indice
Altri manuali iNetVu Antenna
Manuali Antenna popolari di altre marche
Alfa Network
Alfa Network APA-L01 Manuale utente
Naval
Naval PR-422CA Manuale utente
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Manuale utente
TERK Technologies
TERK Technologies TV44 Manuale utente
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Manuale utente
HP
HP J8999A Manuale utente
