Infaco MAL1B15 Manuale utente

USER’S MANUAL

MAL1b15

NOTMAL1B15_ENUSA_01.indd 1NOTMAL1B15_ENUSA_01.indd 1 15/07/2020 10:40:1215/07/2020 10:40:12

NOTMAL1B15_ENUSA_01.indd 2NOTMAL1B15_ENUSA_01.indd 2 15/07/2020 10:40:1215/07/2020 10:40:12

PRECAUTIONS BEFORE USE___________________________________________4

ENVIRONMENTAL PROTECTION ______________________________________ 4

CASE CONTENTS_____________________________________________________4

PRODUCT OVERVIEW ________________________________________________5

SPECIFICATIONS __________________________________________________5

FIRST USE___________________________________________________________6

Battery___________________________________________________________________6

Carrying the Equipment _____________________________________________________ 6

PRECAUTIONS FOR USE______________________________________________ 7

YEARLY MAINTENANCE______________________________________________ 7

TRANSPORT PRECAUTIONS __________________________________________ 7

CHARGING THE BATTERY_____________________________________________8

Using the charger __________________________________________________________8

Charging the battery ________________________________________________________8

Charging a second battery____________________________________________________9

Storing the battery / Putting the battery to Sleep Mode or Winter Mode __________________ 9

Forgetting to put your Batteries in Sleep Mode________________________________________ 10

Battery storage instructions_________________________________________________________10

Charger safety ___________________________________________________________________10

SAFETY INSTRUCTIONS _____________________________________________ 11

TERMS OF WARRANTY _____________________________________________ 11

CONTENTS

NOTMAL1B15_ENUSA_01.indd 3NOTMAL1B15_ENUSA_01.indd 3 15/07/2020 10:40:1215/07/2020 10:40:12

cASE CONTENTS

1 Battery

1 Charger

1 Charger Power Cord

1 Battery-Holder Jacket (Belt + Suspenders)

1 Instruction Manual

Retain all warnings and instructions for future reference.

In warnings, the term “tool” refers to your mains powered electric tool (with

power supply cord) or your battery operated tool (with no power cord).

WARNING. Read safety warnings and instructions. Failure to heed war-

nings and follow instructions may lead to an electric shock, a ﬁre and/or

serious injury.

ENVIRONMENTAL PROTECTION

Follow all country-speciﬁc waste disposal rules and regulations.

Electric appliances must not be disposed of as household waste.

Recycle the device, accessories and packaging.

Ask your approved INFACO dealer for up-to-date information on

eco-compatible waste disposal.

PRECAUTIONS BEFORE USE

NOTMAL1B15_ENUSA_01.indd 4NOTMAL1B15_ENUSA_01.indd 4 15/07/2020 10:40:1215/07/2020 10:40:12

Battery F3015

Charger F3015

product overview

specifications

Reference Battery 831B

Rated voltage 46.8 V

Capacity 2.5Ah / 117Wh

Weight 810 g

Dimensions 190mm x 90mm x 60mm

Reference Charger 841C1 Charger 841C2

Input 220/230V - 50/60Hz 110/120V - 50/60Hz

Output 54,6V - 2A

Power 110W

Fuse 3.15A

These speciﬁcations are given as an indication only. Under no circumstances may they be considered as contractually binding. They are

subject to modiﬁcation without prior notice in the interests of product development.

Patented equipment

NOTMAL1B15_ENUSA_01.indd 5NOTMAL1B15_ENUSA_01.indd 5 15/07/2020 10:40:1615/07/2020 10:40:16

first use

The ﬁrst time you use the equipment, we strongly recommend you to ask the advice of your dealer, who

is qualiﬁed to give you all the advice you need for correct use and optimum performance.

It is essential to read these instructions carefully before using the device.

In wet weather, it is imperative to carry the battery under waterproof clothing to keep the

battery unit protected from the rain.

Battery

Before using the equipment for the ﬁrst time and/or putting the battery to sleep mode, fully charge

the battery (see charging procedure on page 10).

The F3015 Lithium battery MUST be recharged using the INFACO Lithium charger

(Ref.: 841C1/841C2).

It is prohibited to use a different charger as this may lead to a serious electrical accident.

Carrying the Equipment

1. Remove the battery, the battery-holder belt, the suspenders, the holster and the power cord

from the case.

2. Fit the battery onto the battery-holder belt. To do this, slip straps through the battery tabs.

Place the holster on the left or right strap on the battery-holder belt.

3. Slip the power cord through the left or right eye-hole provided in the battery-holder belt.

4. Fix the battery-holder belt to your waist, the battery must be located in the lumbar region.

When using suspenders, ﬁx them to the battery-holder belt and adjust them to your size by pulling

on the straps.

NOTMAL1B15_ENUSA_01.indd 6NOTMAL1B15_ENUSA_01.indd 6 15/07/2020 10:40:2515/07/2020 10:40:25

PrEcautions for use

Do not leave the pruning shears and/or the battery on the ground, and do not expose them to bad

weather conditions.

Make sure the battery’s protective plastic casing is not cracked and is free from any physical damage

When working it is normal that the battery temperature rises (as during charging).

Recommended operating temperature: -5 to 35°C Use outside this temperature range may reduce

the tool’s performances.

In wet weather, it is imperative to carry the battery under waterproof clothing to keep it protected

from the rain.

After using the tool in wet conditions or in a damp environment, it is strongly recommended to store

the (disconnected) device outside its case in a warm, dry and ventilated place.

Keep the cord away from the cutting zone.

At the end of the pruning season, remember to put the batteries in sleep / winter mode to prevent their

premature ageing during storage (see page 11). We strongly recommend that you send your units for

an annual maintenance/service every year. This will ensure proper functioning of your unit and gives an

opportunity to have your units checked and assessed.

TRANSPORT PRECAUTIONS

The case is certiﬁed for the transport of Lithium batteries > 100Wh (UN 3480-3481 standard). However,

some rules must be followed when shipping using a transporter:

The unit must be fully disconnected (pruning shears, coil, and battery).

It is compulsory for the battery to be placed in the housing provided in the case. The case must be taped /

shut correctly to prevent any risk of it opening.

YEARLY MAINTENANCE

NOTMAL1B15_ENUSA_01.indd 7NOTMAL1B15_ENUSA_01.indd 7 15/07/2020 10:40:2515/07/2020 10:40:25

charging the battery

Using the charger

To charge your battery, plug in the charger in a well ventilated area which is free from inﬂammable

products and other sources of combustible materials. The area must be at a temperature between

10°C and 25°C and be sheltered from damp conditions.

1. Connect one end of the power cord

to the charger.

1. Place the battery on channel 1

of the charger.

3. When powered on, the charger initialises:

Green LED + Red LED light

for 2 seconds.

3. . Battery charge completion:

- Channel 1: Green LED on (not ﬂashing).

The time needed to fully charge an 831B battery

is about one and a half hours.

2. Connect the other end of the power cord

to the mains outlet.

2. Once the battery is in place, the charger detects it

and begins charging:

- Channel 1: Green LED ﬂashes quickly

throughout the charge.

4. When the LEDs turn off,

the charger is ready for use.

Charging the battery

It is strictly forbidden to charge the batteries when the temperature in the room is below 0°C

or higher than 40°C.

When charging, the battery must not be covered and not be close to a heat source.

10°C and 25°C and be sheltered from damp conditions.

1. Connect one end of the power cord

2. Connect the other end of the power cord

Voie 1

NOTMAL1B15_ENUSA_01.indd 8NOTMAL1B15_ENUSA_01.indd 8 15/07/2020 10:40:3915/07/2020 10:40:39

6. Once the battery on channel 1 is fully charged, the

battery on channel 2begins charging:

- Channel 1: Green LED on and not ﬂashing

(battery charged)

- Channel 2: Green LED ﬂashes quickly

throughout the charge.

3. SLEEP MODE complete:

- The charger’s LED stays red (not ﬂashing).

- Channel1’s LED (and channel 2’s if there are 2 batteries) stays green (not ﬂashing).

The battery must be removed from the charger and stored in the case.

Indicate that wintering is disabled when the mains plug is disconnected

To enable or disable wintering, the wintering button must be pressed.

7. The two batteries are charged:

- Channel 1: Green LED on (stops ﬂashing).

- Channel 2: Green LED on (stops ﬂashing).

Storing the battery / Putting the battery to Sleep Mode

or Winter Mode

To keep your batteries in good condition (at the end of every pruning season or when not used for more

than 1 month) the following process must be applied (this process can take up to 10 hours per battery)

Channel 2

4. Place the battery on channel 2

of the charger.

5. If the battery on channel 1 is charging, the battery on

channel 2 switches to a waiting charge status:

- Channel 1: Green LED ﬂashes quickly

throughout the charge.

- Channel 2: Green LED ﬂashes slowly

throughout the wait.

A second battery can be placed on the charger:

Channel 1

Channel 2

1. Place the battery (or batteries) on the charger.

NOTE: If there are two batteries on the charger,

the sleep mode will be carried out on both batteries,

one after the other.

2. Press the SLEEP button to begin the process.

The LED switches to red (not ﬂashing) and the charging

LED ﬂashes green.

NOTE: If there are two batteries on the charger,

the sleep mode will be carried out on both batteries,

one after the other.

Channel 1

Charging a second battery

Channel 2

NOTMAL1B15_ENUSA_01.indd 9NOTMAL1B15_ENUSA_01.indd 9 15/07/2020 10:40:5115/07/2020 10:40:51

Forgetting to put your Batteries in Sleep Mode

If the sleep process has not been followed correctly there may be a loss of autonomy in future

uses of the battery. To remedy this situation, leave the battery on charge for between 12 and 72

hours (for extreme cases of incorrect storage that cause an imbalance).

Full autonomy can also be recovered over several daily charges that can be spread over the ﬁrst week of

work. To do this, make sure the battery remains on the charger every night during the ﬁrst week of work.

Reminder: Putting the battery to sleep mode eliminates any risk of battery imbalance (see page 11).

Battery storage instructions

Store the battery and the charger in a well ventilated area, free from inﬂammable products or heat

sources, and keep out of reach of children.

Do not store empty batteries. If the battery is very ﬂat it will no longer charge and will be considered

to be out of service.

Do not store the battery without carrying out the Sleep / Winter mode process.

Do not store batteries that are out of service, return them to your approved INFACO dealer.

Do not store batteries when they are connected to the charger or to a tool.

Do not store the charger connected to the mains power supply.

All failures to follow the storage and safety instructions will result in the manufacturer’s guarantee

being voided.

There is a ﬁre hazard if the product suffers damage (impacts, being dropped, exposure to

high temperatures, etc.).

According to the 2002/96/EC standard, do not dispose of the battery with household waste,

do not burn it or dispose of it in water. Do not open the battery.

Return the battery to an approved INFACO dealer.

Used or defective batteries must be recycled according to the 91/157/EEC directive.

Charger safety

Temperature fault on channel 1:

Flashing red LED

1. Remove the battery from channel 1 and wait a few

minutes for the battery to cool down.

2. Place the battery on the charger. If the problem persists,

please contact your approved INFACO dealer.

Temperature fault on channel 2:

Flashing red LED

1. Remove the battery from channel 2 and wait a few

minutes for the battery to cool down.

2. Place the battery on the charger. If the problem persists,

please contact your approved INFACO dealer.

Channel 1

Channel 2

NOTMAL1B15_ENUSA_01.indd 10NOTMAL1B15_ENUSA_01.indd 10 15/07/2020 10:40:5315/07/2020 10:40:53

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali infaco Accessori per fotocamere

infaco

infaco L850B Manuale utente

infaco

infaco L850B Manuale utente

Manuali Accessori per fotocamere popolari di altre marche

Viltrox

Viltrox EF-NEX Istruzioni per l'installazione

Calumet

Calumet 7100 Series CK7114 Manuale utente

Ropox

Ropox 4Single Series Manuale utente

Cambo

Cambo Wide DS Digital Series Istruzioni operative

Samsung

Samsung SHG-120 Manuale utente

Ryobi

Ryobi BPL-1820 Manuale operativo

Aegis

Aegis ABL-36020P Manuale utente

Pentax

Pentax Data Back Fc Manuale utente

Fantasea

Fantasea EyeGrabber F Series Manuale utente

Honeywell

Honeywell HDZ20HD Manuale utente

EGO

EGO BA1400T Manuale utente

Sima

Sima SRW-62 Manuale utente

Shape

Shape A7SSMKIT Manuale utente

Slide Kamera

Slide Kamera HST-2 Manuale utente

Power works

Power works 2902613 Manuale utente

SES

SES SE-2047-2 Manuale utente

Olympus

Olympus PT-EP05L Manuale utente

Starlite

Starlite OctoDome nxt Manuale utente

infaco MAL1B15 Manuale utente

Manuali Accessori per fotocamere popolari di altre marche