Infiniton ROT70 Manuale utente
ELECTRIC OVEN
USER MANUAL
MODEL: HORNO ROT70
Before leaving the factory, this appliance was tested and regulated by expert and skilled
personnel to give the best operating results. Any repair or regulation that may
subsequently be necessary must be carried out with the greatest care and attention.
For this reason, we recommend you always contact the Dealer you bought the appliance
from or our nearest Service Centre, specifying the type of
problem and the model of your appliance. Please remember as well that the
original spare parts are available only from our Technical Service Centres.
Do not leave the packaging unguarded, both for the safety of children and for the
protection of the environment, but dispose of it in a centre for differentiated waste.
The symbol on the product or on the packaging means that the product must not be
considered as normal household refuse, but must be taken to the
appropriate collection point for the recycling of electric and electronic equipment.
The appropriate disposal of this product helps avoid potential negative
consequences on the environment and for health, which could be caused by
inappropriate disposal of the product. For more detailed information on the
recycling of this product, please contact your municipal offices, the local waste disposal
service or the store where the product was purchased.
TABLE OF CONTENTS
Important information regarding safety ................................................... ..: 1-2-3
Instruction for Installation .................................................................... ..…: 4-5-6-7
Device Cleaning and Maintenance, ..............................................................: 8-9
Oven Energy Efficiency ................................................................................ : 10
Oven Technical specification ………………………………………………………….……..……: 10
Oven Use, RO 64TF………………….…………………...............................................: 11
Using Digital Timer……………………………………………………………………………………..…………: 12,13,14,15
Instruction for cooking ..………………................................................................: 16
1
IMPORTANT INFORMATION ABOUT SECURITY
Dear Customer,
Thank you for choosing one of our products. This device is easy to use, but you
should read this booklet carefully before installing and using it. The booklet
contains instructions that will help you install, use and maintain the product in
the best way.
THANKS
We appreciate the purchase of our product. We hope you get the most out of
all the features and functions it offers.
Before using the product, please read this Instruction Manual carefully and in
its entirety. Keep this manual in a safe place for future reference. Also make
sure that people who are also going to use the product are familiar with these
instructions.
ATTENTION
- The first time you turn on the oven, it may give off an unpleasant odor. This is
due to the adhesive agent used in the insulating panels inside the oven. It is
completely normal and, if it happens, you just have to wait for the smell to
disappear before introducing food into the oven.
- The oven and its accessible areas will be heated during use.
- Take precautions to avoid touching the oven resistances.
- Keep children under 8 years of age away from the oven unless they are under
the constant supervision of an adult.
- This oven can not be used by children of 8 years or older or by persons with
reduced physical, sensory or mental faculties, lack of experience and
knowledge, or unless under supervision or following instructions on their use
in a safe and secure way. who understand the related dangers. You should
make sure that children do not play with the oven. Cleaning and maintenance
of the oven should not be carried out by children without supervision.
- Do not use abrasive cleaners or sharp metal scrapers to clean the oven glass,
as it could scratch the surface and permanently damage the glass.
2
IMPORTANT INFORMATION ABOUT SECURITY
- During use, the oven becomes very hot. Take precautions to avoid touching
the resistors inside the oven.
- Prevent children from approaching the oven during use, especially when
using the grill.
- Make sure the oven is switched off before changing the interior bulb to avoid
the risk of electrocution.
- A means of disconnection must be implemented in the fixed electrical
installation in accordance with the corresponding electrical specifications.
- During pyrolytic cleaning, accessible areas will heat up more than normal.
Keep children away.
- Children should be supervised to ensure they do not play with the oven.
- This device is not designed for use by people
(including children) with reduced physical, sensory or mental faculties, or lack
of experience and knowledge, unless under supervision or following
instructions on their use by the person responsible for their safety.
- Do not use the oven barefoot. Do not touch the oven if your hands or feet are
wet or damp.
- Do not open the oven door frequently during cooking.
- The oven must be installed and tuned by an authorized technician. The
manufacturer is not responsible for any damage that may have been caused by
its installation in an inappropriate place or by unauthorized personnel.
- Do not leave anything on top of the oven door when it is open, as it could
overturn the oven or break the door.
- Some components of the oven can keep the heat for a long time; Wait for it
to cool completely before touching the exposed points directly to the heat.
- If you are not going to use the oven for a long time, we recommend that you
unplug it.
- If the supply cable is damaged, it must be replaced by the manufacturer or its
authorized technical service to avoid any risk.
- Remove excess dirt residues before cleaning; consult the products that can be
used inside the oven during cleaning.
- Use only the temperature probe recommended for this oven.
- Do not use a steam cleaner.
3
IMPORTANT: The oven produces hot air or steam during the cooking process.
Be very careful when opening the door.
The user must not replace the appliance's power cord. It should only be
replaced by a qualified electrician.
Never cover the oven with aluminum foil. It could block the slots and prevent
regular heat exchanges, damaging the enameled surface.
Before you start using the oven to cook, you must remove the protective film
from the oven door and heat the empty oven to the maximum temperature
for about 45 minutes (this will remove the odors and fumes created by
manufacturing waste). After this, the oven should be thoroughly cleaned with
soapy water and rinsed well, but do not use too much water as it could
penetrate and damage the internal components.
Always call an authorized Technical Assistance Center and insist on original
spare parts if repairs are required. Repairs made by incompetent people can
cause damage.
The appliance is conform to the following European Directives and
Regulations :
Directive 2014/35/EC ( Low Voltage Appliances )
Directive 2014/30/EC ( ElectroMagnetic Compability )
Directive 2012/19/EC
Directive 2009/125/EC
Directive 2011/65/EC
Regulation 1935/2004/EC
Regulation 1907/2006/EC
( WEEE - Waste Electrical and Electronic
Equipment ) ( ErP - Eco Design )
( RoHS - restriction of hazardous substances)
( Materials intended to come into contact with
food ) ( REACH –Restriction of Chemicals)
4
INSTALLATION OF THE OVEN IN ITS SPACE IN THE KITCHEN
Place the oven in the space reserved for this appliance in the kitchen; It can
be placed under a work surface or in a vertical cabinet. Secure the oven in
place with two screws using the two fixing holes in the oven frame. To access
the fixing holes, open the oven door. To ensure adequate ventilation, respect
the measurements and installation distances indicated.
It is important NOT to COVER the front of the oven. This part can not be
placed behind any door for decorative purposes.
IMPORTANT
In order for the oven to function properly, the space for the oven housing
must be adequate. The surfaces of the kitchen next to the oven must be
made of a heat resistant material. Make sure that surface adhesives made of
varnished wood panels can withstand temperatures of at least 120 ° C.
Plastics or adhesives that can not withstand these temperatures will melt
and deform. Once the oven is installed in its place, completely isolate all
electrical components. It is a legal requirement on security. All protection
elements must be firmly fixed in place, so that they can not be removed
without using tools. Remove the rear part of the cabinet or space intended
for the oven to ensure adequate ventilation. There must be a minimum of 45
mm between the back of the oven and the adjoining wall or surface.
The installation must be carried out by an authorized technician in
accordance with the guidelines. Our company is not responsible for damages
to people, animals or property due to improper installation.
INSTALLATION WARNINGS
The dimensions and materials of the cabinet or cabinet in which the built-in
oven will be installed must be correct and must be resistant to temperature
increases. Install as shown in the Figure.
5
SEE THE FIGURE
* The walls of the furniture in which the oven is installed must be resistant to heat. The wall panels
must be resistant to 100 ° C, especially if the side walls are made of wallboard. Plastic panels or
adhesives that are not resistant to this heat can be deformed and damaged.
* For safety reasons, direct contact with the electric oven parts should be avoided.
* The insulation and protection parts must be installed in such a way that they can not be removed
with any tool.
* The oven must be installed as in the Figure to provide a more effective air flow.
* It is recommended to leave a space of at least 40 mm in the back of the kitchen unit in which the
oven is installed.
* A support must be placed under the oven that can support the weight when placing the oven.
* The rear section of the cab in the kitchen unit should be re-routed to provide a better fl ow of air.
* It is not recommended to install the device near refrigerators or freezers, otherwise the
performance of these devices would be affected by the radiated heat.
* Place the device centered in the inlaid cabin
* Open the oven lid and mount the body on the countertop with four thumbscrews aligning the
holes on the sides.
* The oven can be mounted in a cabinet above or below the counter, if desired
* When mounting a built-in electric stove on the countertop above the oven, the electricity cords of
the oven and the stove must be separated to remove the oven from the stove when necessary.
6
FIXING THE OVEN IN ITS COMPARTMENT
1. Place the oven in its compartment.
2. Open the oven door.
3. Secure the oven in your kitchen compartment with the two "A" fasteners,
which fit into the holes in the oven frame, and with the two "B" wood screws.
ELECTRIC CONNECTION
* The device must be connected to the main electrical network only by authorized
technicians in accordance with the laws and regulations in force.
* Ensure that the power of the main network is sufficient to supply the power indicated
on the information label placed on the lower front part of the device.
* If the fuse current in your home is less than 16 Amps, have a 16 Amp fuse connected
by a qualified electrician.
WARNING: The device must be absolutely grounded.
* Your oven includes a grounded plug mounted on the network cable. This plug must be
used with a grounded line. Have an authorized electrician perform the grounding
installation.
Before supplying electricity to the device:
1)
2)
3)
Position the oven so that it is easier to reach the socket used for the electrical connection or the
bipolar switch.
Do not let the power cord touch the hot surfaces when it is placed and do not attach it to the
oven lid.
Contact the nearest authorized service center if the power cord is damaged. Make sure that the
authorized service has the opportunity with a new cable with plastic insulation of the same size
and that can withstand the electric current needed by the oven.
* A bipolar switch with at least 3 mm must be installed between the points of contact between
the device and the electric cable and suitable for transporting the desired load in accordance
with the laws in force.
L
N
7
if the device is to be connected directly to the electric wiring. Ground wire must not be cut
be double pole switch.
*It is not advised to use adapters, multi plugs or extension cords. If absolutely necessary,
adapters or extension cords in line with safety laws can be used. However, never go
beyond the maximum current capacity and maximum power stated for the adapter.
*Test heating elements for 3 minutes after the connections are done.
*Electricity safety of the device is guaranteed only if connected to suitable source correctly
with grounding in accordance with the rules. Our company cannot be held responsible for
the damages to people, animals or properties due to the failure to ground the device
properly.
WHEN THE DEVICE IS INSTALLED INITIALLY:
1. Set the Temperature Control to maximum level. (250 C MAX)
2. Set the Function button as Top and Bottom Grill (and + Fan if available).
3. Run the oven in this setup for 30 minutes.
4. Open a window for air circulation.
A smoke and smell resulting from insulation materials and heating elements can be
experienced for once during this period. If this happens, wait for the smoke and smell to
dissipate before placing food inside the oven.
*After these are done, clean the interior of the oven with a slightly wet soapy soft cloth.
IMPORTANT: Always use the middle section of the handle when opening the lid of the
oven.
WARNING: Carefully wash parts such as tray, grid etc before the first use of the oven.
8
For a good appearance and operation, keep the oven clean. The modern design of the
oven facilitates its maintenance, reducing it to a minimum. The elements of the oven
that come into contact with food should be cleaned regularly.
General cleaning
-Before performing any cleaning or maintenance task, unplug the oven.
-Set all the controls in the OFF position.
-Wait until the inside of the oven cools until it is only slightly hot; Cleaning is easier if the
oven is a little hot.
-Wipe the surfaces with a soft cloth, a sponge or a soft damp sponge and then dry them
with a cloth.
If it is very dirty, use hot water and a non-abrasive cleaning product.
-Do not use abrasive cleaners or sharp metal scrapers to clean the oven glass, as they may
scratch the surface and damage the glass.
-Avoid the contact of acidic substances (lemon juice, vinegar ...) with stainless steel
elements.
-Do not use a high-pressure cleaner to clean the oven.
-The oven trays can be washed with a mild detergent.
Inside the Oven
Appropriate chemicals can be used after consulting the recommendations of the
manufacturer and trying it on a small part of the gap. Abrasive cleaning agents or abrasive
clothes must not be used on the surfaces of the gap.
Do not clean with a jet of steam.
NOTE: The manufacturer of this appliance does not take responsibility for damages
caused by chemicals or abrasive cleaning.
REMOVING SIDE WIRE TRAYS OF THE OVEN
It is possible to remove and clean the side wire
trays in which trays and wire grids are placed
easily. Follow the procedure as shown in the
picture below to remove the oven interior wire
trays from the side walls.
Altri manuali per ROT70
1
Indice
Lingue:
Altri manuali Infiniton Forno
Infiniton
Infiniton HORNO TBPYE27 Manuale utente
Infiniton
Infiniton HORNO P709FB Manuale utente
Infiniton
Infiniton HORNO H6BK Manuale utente
Infiniton
Infiniton HORNO B4VK Istruzioni per l'installazione e il funzionamento
Infiniton
Infiniton 36YA2 Manuale utente
Infiniton
Infiniton HSM-26B61 Manuale utente
Infiniton
Infiniton HORNO 1040YA1 Manuale utente
Infiniton
Infiniton HORNO PYE7028 Manuale utente
Infiniton
Infiniton CC56BWC Manuale utente
Infiniton
Infiniton HSM-20B31 Manuale utente
Infiniton
Infiniton HSM-31B46 Manuale utente
Infiniton
Infiniton HORNO P659AT Manuale utente
Infiniton
Infiniton HORNO 40ACW0 Manuale utente
Infiniton
Infiniton HORNO DG70 Manuale utente
Infiniton
Infiniton HORNO 48YA3 Manuale utente
Infiniton
Infiniton HSM-12N18 Manuale utente
Infiniton
Infiniton HSM-81C60B Manuale utente
Infiniton
Infiniton HORNO 40ECD6 Manuale utente
Infiniton
Infiniton HSM-71C28B Manuale utente
Infiniton
Infiniton HORNO 818LB Manuale utente
