Infinity Infinity Primus 140 Manuale utente

PRIMUS SPEAKER SYSTEMS

Owner’s Guide

Primus 140

Primus 150

Primus 160

ENGLISH

21428_Primus140_160_ENG 13/08/04 10:28 Side 1

INFINITY PRIMUS™SERIES

The Primus series of loudspeakers continues Infinity’s longstanding

commitment to accurate sound reproduction. Our proprietary Metal

Matrix Diaphragm (MMD™) drivers, precision dividing networks, and

rigid, well-braced enclosures combine to deliver uncompromised

performance in any stereo or multichannel home theater system.

In addition, Primus series speakers are magnetically shielded for

safe placement adjacent to a television.

UNPACKING THE SPEAKERS

If you suspect damage from transit, report it immediately to your dealer.

Keep the shipping carton and packing materials for future use.

PLACEMENT

Stereo

Before deciding where to place your Primus speakers, survey your room

and think about placement, keeping the following points in mind, using Fig-

ure 1 as a guide:

• For best results, place the speakers 6'–8' apart.

• Position each speaker so that the tweeter is approximately at ear level.

• Generally, bass output will increase as the speaker is moved closer to a

wall or corner.

• Refer to the“Home Theater”section if you also plan to use the speakers

for home theater reproduction.

Figure 1. Experiment with speaker placement to obtain the

best bass level and stereo imaging in your room.

HomeTheater

For front-channel use, place one speaker on the left and another on the

right, along either side of the television monitor. Since the speakers are

magnetically shielded, you can place them without worrying about the field

distorting the TV picture.

For rear-channel use, place Primus bookshelf speakers on bookshelves or

stands alongside the listening position. Final placement depends on room

acoustics, availability of space, and your listening preference (Figure 2 and

Figure 3).

The center channel speaker should be placed on top of or directly below

the television and aimed toward the listening area.

NOTE: An Infinity powered subwoofer will add impact and realism to both

music and film soundtracks. Contact your Infinity dealer for recommenda-

tions on subwoofer models for your application.

Figure 2. This overhead view shows a typical home theater plan.

Figure 3. This figure shows an alternate layout, which may be more

suitable for some rooms.

Couch

Left

Front

Channel

Left

Surround

Channel

Right

Surround

Channel

Right

Front

Channel

Center

Channel

Infinity Subwoofer

(optional)

Couch

Left

Front

Channel

Left

Surround

Channel

Right

Surround

Channel

Right

Front

Channel

Center

Channel

Infinity Subwoofer

(optional)

Listening Position

Left

Channel

Right

Channel

2PRIMUS SPEAKER SYSTEMS

21428_Primus140_160_ENG 13/08/04 10:28 Side 2

PRIMUS SPEAKER SYSTEMS

+–

Receiver or

Amplifier

(rear view)

Speaker (rear view)

– +

(one channel shown)

REDBLACK

Figure 5. This example shows how to connect bare wires to the terminals.

WIRING THE SYSTEM

IMPORTANT: Make sure all equipment is turned off before making any

connections.

For speaker connections, use a minimum #16-gauge speaker wire with

polarity coding.The side of the wire with a ridge or other coding is

usually considered positive polarity (i.e., +).

NOTE: If desired, consult your local Infinity dealer about speaker wire and

connection options.

The speakers have coded terminals that accept a variety of wire connec-

tors.The most common connection is shown in Figure 5.

To ensure proper polarity, connect each +terminal on the back of the

amplifier or receiver to the respective +(red) terminal on each speaker, as

shown in Figure 6. Connect the –(black) terminals in a similar way. See the

owner’s guides that were included with your amplifier, receiver and

television to confirm connection procedures.

IMPORTANT: Do not reverse polarities (i.e.,+ to – or – to +) when

making connections. Doing so will cause poor imaging and diminished bass

response.

Figure 6. Wiring diagram shows polarity connections for one channel of a

stereo or home theater system.

ENGLISH

Figure 4.

Step 1.

Mark the positions on the wall where you would like to place the mounting

screws.

Step 2.

Fasten two 1-1/2," #10 wood screws to the wall using the markings

placed in Step 1 as your guide. Leave an 11/16" space between the wall

and screwhead. If a wall stud is not available, use an appropriate anchor.

Step 3.

Place the speaker on the wall by aligning the keyholes on the back of the

speaker to the screwheads on the wall. Once positioned properly, the

speaker should slide down slightly and become secure.

The Primus 140 also allows the use of third-party wall brackets using the

1/4"-20 threaded insert located beneath the keyhole mount. Consult the

wall-bracket manufacturer for selection of proper bracket.

– +

Keyhole mounts

1/4"-20Threaded insert

(Primus 140 only)

WALL-MOUNTING THE PRIMUS 140 AND

PRIMUS 150

The Primus 140 and Primus 150 are designed to mount directly to a wall.

Each satellite speaker has two keyholes on the back. Each speaker will

require (2) 1-1/2," #10 wood screws fastened to a wall stud. If a wall stud

is unavailable, install an anchor appropriate for a 1-1/2," #10 screw.

NOTE: The customer is responsible for the correct selection and use of

mounting hardware (available through hardware stores) that will ensure the

proper and safe wall-mounting of the speakers.

21428_Primus140_160_ENG 13/08/04 10:28 Side 3

4PRIMUS SPEAKER SYSTEMS

FINAL ADJUSTMENTS

Check the speakers for playback, first by setting the system volume control

to a minimum level, and then by applying power to your audio system. Play a

favorite music or video segment and increase the system volume control to

a comfortable level.

NOTE: You should hear balanced audio reproduction across the entire

frequency spectrum. If not, check all wiring connections or consult

the authorized Infinity dealer from whom you purchased the system

for more help.

The amount of bass you hear and the stereo-image quality will be affected

by a number of different factors, including the room’s size and shape,

the construction materials used to build the room, the listener’s position

relative to the speakers, and the position of the speakers in the room.

Listen to a variety of music selections and note the bass level. If there is

too much bass, move the speakers away from nearby walls. Conversely, if

you place the speakers closer to the walls, there will be more bass output.

Nearby reflecting surfaces can adversely affect stereo-imaging quality. If

this happens, try angling the speakers slightly inward toward the listening

position until the optimum effect is achieved.

CARE OF YOUR SPEAKER SYSTEM

Each Primus series cabinet has a wood-grain-vinyl finish that does not

require any routine maintenance.When needed, use a soft cloth to remove

any fingerprints or dust.

Clean the grille by gentle vacuuming.

NOTE: Do not use any cleaning products or polishes on the cabinet

or grille.

21428_Primus140_160_ENG 13/08/04 10:28 Side 4

ENGLISH

PRIMUS SPEAKER SYSTEMS

SPECIFICATIONS

Primus 140 Primus 150 Primus 160

Frequency Range: 100Hz – 20,000Hz (±3dB) 58Hz – 20,000Hz (±3dB) 49Hz – 20,000Hz (±3dB)

Recommended

Amplifier Power Range: 10 – 100 watts 10 – 100 watts 10 – 150 watts

Sensitivity: 86dB 88dB 90dB

(2.83V @ 1 meter)

Nominal Impedance: 8Ω8Ω8Ω

Crossover Frequency: 3000Hz; 24dB/octave 3300Hz; 24dB/octave 3000Hz; 24dB/octave

Low-Frequency Driver: 100mm (4") MMD™ 130mm (5-1/4") MMD™ 165mm (6-1/2") MMD™

magnetically shielded magnetically shielded magnetically shielded

Mid-Frequency Driver: N/A N/A N/A

High-Frequency Driver: 19mm (3/4") MMD, 19mm (3/4") MMD, 19mm (3/4") MMD,

magnetically shielded magnetically shielded magnetically shielded

Dimensions (H x W x D): 245mm x 150mm x 173mm 322mm x 187mm x 267mm 370mm x 208mm x 280mm

(with grille) (9-5/8”x 5-15/16” x 6-13/16”) (12-3/4" x 7-3/8" x 10-1/2") (14-1/2" x 8-1/4" x 11")

Weight: 3.2kg (7 lb) 6kg (13.5 lb) 7.3kg (16.1 lb)

Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and related

Infinity publications are therefore subject to change without notice.

Declaration of Conformity

We, Harman Consumer Group International

2, route de Tours

72500 Chateau-du-Loir

France

declare in own responsibility that the products described

in this owner’s manual are in compliance with technical

standards:

EN 50081-1:1992

EN 50082-1:1997

Robin Marshall

Harman Consumer Group International

Chateau-du-Loir, FRANCE 7/04

21428_Primus140_160_ENG 13/08/04 10:28 Side 5

Infinity Systems, 250 Crossways Park Drive,Woodbury, NY 11797 USA 800.553.3332 (USA only) www.infinitysystems.com

Infinity is a registered trademark, and Infinity Primus and MMD are trademarks, of Harman International Industries, Incorporated.

Part No. 406-000-01532 7/04

21428_Primus140_160_ENG 13/08/04 10:28 Side 6

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Infinity Sistema di altoparlanti

Infinity

Infinity Entra Two Manuale utente

Infinity

Infinity Reference Standart I Manuale utente

Infinity

Infinity Total Solutions TSS-800 Manuale utente

Infinity

Infinity Primus 140 Manuale utente

Infinity

Infinity BETA ES250 Manuale utente

Infinity

Infinity Primus 250 Manuale utente

Infinity

Infinity Primus Series Primus Theater Pack II Manuale utente

Infinity

Infinity Primus Series Primus 140 Manuale utente

Infinity

Infinity IRSV System Manuale utente

Infinity

Infinity TSS-500OM Manuale utente

Infinity

Infinity INTERLUDE IL25c Manuale utente

Infinity

Infinity Total Solutions TSS-450 Manuale utente

Infinity

Infinity Total Solutions TSS-1100 Manuale utente

Infinity

Infinity Reference standard beta speaker system Manuale utente

Infinity

Infinity Alpha 37c Manuale utente

Infinity

Infinity Primus Theater Pack II Manuale utente

Infinity

Infinity CLASSIA PSW310W Manuale utente

Infinity

Infinity 108IL10B Manuale utente

Infinity

Infinity PRIMUS 250 Manuale utente

Infinity

Infinity OUTDOOR SPEAKERS Manuale utente

Infinity

Infinity Primus 250 Manuale utente

Infinity

Infinity 10" Dual Voice-Coil Subwoofer Beta Ten.dvc Manuale utente

Infinity

Infinity Infinity Alpha 25ES Manuale utente

Infinity

Infinity Interlude IL50 Manuale utente

Manuali Sistema di altoparlanti popolari di altre marche

JVC

JVC CA-MXK5R Manuale utente

LG NB4532B Manuale utente

JVC

JVC CA-FSH100 Manuale utente

5Core

5Core Pro Series Manuale utente

EAW

EAW MQV1394e Manuale utente

Lynx

Lynx GXR-LA10A Manuale utente

iLive

iLive ITB066B Manuale utente

RDX

RDX QuickStation 4 Manuale utente

Electro-Voice

Electro-Voice S-122 Manuale utente

Sven

Sven SPS-619 GOLD Manuale utente

Pioneer

Pioneer CS-7070 Manuale utente

EAW

EAW UB82e Manuale utente

Sondpex

Sondpex Active Speaker System and Digital Music... Manuale utente

JVC

JVC NX-PN7 Manuale utente

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuale utente

Yamaha

Yamaha NX-A01 - Speaker Sys Manuale utente

SE Audiotechnik

SE Audiotechnik I-LINE Manuale utente

Gemini

Gemini WRX-843 Series Manuale utente