Infohand IBMH-A100 Manuale utente

Getting started

●Welcome

Thank you for purchasing the IBMH-A100 Bluetooth headset and we believe you will be satisfied

with the IBMH-A100 for your requirements. IBMH-A100 works with Bluetoothphones.

Please read this users guide to get started and to make the best use of the Bluetooth headset’s

full features.

●Includings

Your IBMH-A100 Bluetooth headset package includes:

One IBMH-A100 Bluetooth headset

One AC power adaptor (100~220V only)

One IBMH-A100 User Guide

●Overview of the IBMH-A100

NO. NAME DESCRIPTION

Power/Talk Controls many functions of the Bluetooth headset including making,

redialing, answering, rejecting, ending, and transferring calls. Also

used for turning on and off, as well as pairing the Bluetooth headset

to a Bluetooth phone.

LED Indicator LED Indicator light tells the status of the Bluetooth headset.

Volume

Control

Adjusts the loudness of the speaker sound that you hear.

Also used for the mute or un-mute as well as pairing the Bluetooth

headset to a Bluetooth phones.

Speaker For outgoing audio.

Microphone For incoming audio.

Charging Port For charging the battery.

Before Using Your Bluetooth headset

●Phone compatibility

The IBMH-A100 is compatible with most Bluetooth phones that are compliant with Bluetooth

version 1.1 or higher specification and support the Bluetooth headset and/or hands-free profile(s).

Ensure that your phone has Bluetooth capability by either visiting your phone manufacturer’s web

site.

●Charging the battery

The IBMH-A100 uses a rechargeable battery that shall be charged fully before you use the

Bluetooth headset for the first time.

Insert the power adaptor jack into the charging port of

the Bluetooth headset.

1. Connect the including wall charger to AC power.

2. Charge your Bluetooth headset until the LED lights turns off. The Bluetooth headset will be fully

charged in approximately in 2.5 hours.

3. Remove the power adaptor jack from the charging port of the Bluetooth headset.

4. Disconnect the wall charger from the AC power.

5. Your Bluetooth headset is now ready to “pair” the IBMH-A100 Bluetooth headset to your

Bluetooth phone. If the Bluetooth headset has already been paired to your phone, then you can

begin using it.

The Bluetooth headset may also be charged using a car lighter adapter (optional accessory).

▲Draining the battery once a month can improve the battery life. Otherwise, it’s best to charge

your Bluetooth headset whenever possible. Avoid charging in excessive heat (over 40°C) or cold

(under 0°C).

●Low Battery Warning

The 3 times short beeps and/or 3 times short blinking of the LED Indicator in the standby mode

means the low battery warning. This indication continues at every 10 seconds in the standby

mode and occurs once In the talking state.

You can use the Bluetooth headset for the phone call for 1 or 2 minutes but recharging is

recommended. Refer to the Charging the battery section to recharge your Bluetooth headset.

●Turning Bluetooth headset on and off

To turn your Bluetooth headset on, press and hold the Power/Talk button until the LED Indicator

flashes red 5 times shortly. Normally it takes about 3 seconds. The LED Indicator will blink once at

every 10 seconds while the Bluetooth headset is on. To turn your Bluetooth headset off, press and

hold the Power/Talk button until the LED Indicator flashes red 5 times shortly. Normally it takes

about 5 seconds.

●Getting the perfect fitness

1. Unfold the microphone leg

2. Select of left or right year

3. Lift slightly up the ear piece part

4. Slide Bluetooth headset over your ear

5. Find the best position

6. Push the ear piece part

Pairing

●Pairing your Bluetooth headset with the Bluetooth Phone

Pairing creates a unique and encrypted wireless communication link between Bluetooth headset

and Bluetooth phone and allows them to communicate with each other. The pairing process

may be various depending on the device with which you pair the headset (see the device user’s

guide).

To use your Bluetooth headset with other Bluetooth phones, you must pair the Bluetooth headset

with the device before you use your Bluetooth headset for the first time. Once the pairing is made

you do not have to repeat the pairing process for the further use.

1. Getting into Pairing Mode

To enter in to the pairing mode press and hold the Power/Talk button for

approximately 5 seconds until the Bluetooth headset LED Indicator turns on

steadily if the Bluetooth headset is off or press and hold the Power/Talk

button and Volume Control button simultaneously for approximately 1

second if the Bluetooth headset is on.(There will be 5 short flashes of the

LED Indicator before it goes on steadily if the Bluetooth headset is off.)

While the LED Indicator light is still steadily lit, release the Power/Talk button. The LED Indicator light

will remain on, indicating that your Bluetooth headset is in the pairing mode and ready to

communicate for pairing with the other Bluetooth phone.

2. Pairing from the Bluetooth phone

Set your Bluetooth phone to “discover the Bluetooth headset” by following your Bluetooth phone

user’s guide. Typically, this is done by going to a “setup” or “connect” menu and then selecting

the options to “discover” s. Your Bluetooth phone will find the “IBMH-A100” Bluetooth headset. It

may take several seconds to establish a connection. Then your Bluetooth phone asks if you want

to pair with it. Confirm this by pressing “yes” or “ok” button. Then the Bluetooth phone will prompt

you for a passkey or PIN code. Enter a sequence of four zeros: 0000.

3. Confirm pairing

To indicate that the pairing has been successful, the Bluetooth headset will

beep once and enter into standby mode. During the stand-by mode, the LED

flashes 2 times shortly at every 10 seconds. Check the display of your

Bluetooth phone to see whether the pairing process is succeeded or not. You

are now able to use your Bluetooth headset for any calls.

If the pairing cannot be successful in 60 seconds, the Bluetooth headset will return to unpaired

mode

without the success tone. Refer to your Bluetooth phone user’s guide and repeat the

pairing process.

Some Bluetooth phones do not support the auto connection feature after the pairing process.

You have to connect between two devices manually. Once the connection has been broken

for any reasons (turning off the Bluetooth headset power, out of operating range of the Bluetooth,

etc.),

you have to connect between two devices manually.

Basic Features

If your Bluetooth headset is off, turn it on now (see Turning Bluetooth headset on and off section)

and connect it with the Bluetooth phone manually (see Confirm pairing section). If your Bluetooth

headset is on but disconnected, connect it with the Bluetooth phone manually (see Confirm

pairing section).

Some Bluetooth phones do not support all features listed. Please consult your Bluetooth phone

user’s guide.

1. Making a call

To make a call, dial using your Bluetooth phone keypad (refer to the Bluetooth phone user’s

guide) and press Power/Talk button to complete the call.

2. Last number redial

When making a call, you can quickly dial the last number called from your Bluetooth headset.

Press Power/Talk button twice. Check the display on your Bluetooth phone for call progress.

(For some Bluetooth phones, one pressing of the Power/Talk button may make a call.)

3. Answering a call

Wait for the Bluetooth headset to ring, then press and release the Bluetooth headset Power/Talk

button or press and release the Bluetooth phone’s SEND button. During a call, the Bluetooth

headset LED Indicator will flash showing a call is in progress.

4. Transferring the call to the Bluetooth headset

You can transfer a call from your Bluetooth phone to your Bluetooth headset by pressing and

releasing the Power/Talk button.

5. Ending a call

To end a call, press and release the Bluetooth headset Power/Talk button or Bluetooth phone

END button at any time during a call.

6. Adjusting the volume with mute feature

You can control the volume of speaker as pressing volume control (Up/Down). Every pressing of

the button makes a low beep sound. If you reach to Max / Min Volume level, you can hear high

beep sound. If you press Volume Control down button for long time, the Bluetooth headset will be

in mute mode – opponent cannot hear you any longer, but you can still hear your opponent. If

you want to cancel the mute mode, press Volume Control down button for a long time again.

Additional Features

Your Bluetooth headset supports both Headset and Handsfree Profiles. Accessing additional

features of your Bluetooth headset depends on which profile your Bluetooth phone supports.

These features can be available if your Bluetooth phone supports the Handsfree Profile. To use

additional features, pair your Bluetooth headset to your Bluetooth phone with Handsfree profile.

Refer to your Bluetooth phone user’s guide for additional information.

Some Bluetooth phones do not support all features listed even they support the Handsfree

profile. Please refer to your Bluetooth phone user’s guide.

1. Making a voice dial call

To make a voice dial call, Press and hold the Power/Talk button with beep. And release the

Power/Talk button after another beep sound occurs. Then you can make a call with voice dialing

feature of your Bluetooth phone.

2. Call rejection

Wait for the Bluetooth headset to ring and press the Bluetooth headset volume control button for

a long time, and the call is rejected.

3. Call transfer (Bluetooth headset to Bluetooth phone)

When answering a call with Bluetooth headset, you can transfer the call back to your Bluetooth

phone. Press and hold the Bluetooth headset Power/Talk button with beep. And release the

Power/Talk button after another beep sound occurs. Then the call is transferred to the Bluetooth

phone from the Bluetooth headset.

4. Call waiting and toggling

During a call, the 2nd call may appear. Then press and release the Bluetooth headset Power/Talk

button. The 1st call is held and the 2nd call is active. By pressing and releasing the Bluetooth

headset Power/Talk button, the 1st call and the 2nd call can be toggled.

●LED Indicator Status

Bluetooth headset Status LED Indication

Power Off Off

Indice

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente