INFORCE®
6vxTM and 9vxTM FLASHLIGHT
USER MANUAL AND WARRANTY
BATTERY REPLACEMENT
Your INFORCE 6vx flashlight comes with (2) high-efficiency 123A Lithium batteries;
the INFORCE 9vx with (3).
To insert the batteries, turn the multi-function tailcap counterclockwise to remove it from
the flashlight body. Insert the batteries into the open handle, negative (–) end first.
Re-thread the multi-function tailcap clockwise onto the flashlight handle.
Notes:
• Whenreplacingbatteries,nevermixbatterytypeoroldandnewbatteries.
• Batteriescanleakandmaycausedamagetotheinsideofthelight.Removethe
batteries if the flashlight will be stored for more than 2 weeks.
• Flashlightheadsarenon-removable;anyattempttoremovetheheadwilldamage
the light and void the warranty.
• Thelightoutputoftheflashlightwilldimovertimeasyourbatteries start to drain. At
some point, batteries that have been depleted substantially will not have enough
energy to sustain a full high power output. At that time, there will be little to no
distinction when attempting to cycle between high and low modes. However, there
will still be enough energy in the batteries to produce useful light for a period of time.
This is not an indication that the batteries have to be changed.
CAUTION: Lithium batteries can explode or cause burns if recharged, shorted,
disassembled or exposed to water, high temperatures or fire. Please
follow manufacturer’s guidelines for safe storage, use and disposal.
If the light has been submerged, dry the exterior of the light prior to
replacing the batteries. Fresh and salt water will damage internal
electronics and batteries. Do not use counterfeit or inferior-quality
batteries, as they do not meet safety standards and have been the
cause of personal and property damage. To ensure safety and
performance, the purchase of established brands, such as
Duracell®, Energizer®or Panasonic®is recommended.
4-FUNCTION SWITCH OPERATION
• Formomentary on mode, press and hold the button for more than 1/2 second;
when the button is released, the light will turn off.
• Forhigh power mode, press the button once. If high power is on for more than
2 seconds, the next press of the button will turn the light off.
• Forlow power mode, press the button twice within two seconds.
• Forstrobe mode, two quick clicks of the button when in high power,
low power or off mode will activate the strobe.
• Forlockout mode, twist flashlight tailcap one half turn (180 degrees) counterclockwise.
TO DISABLE THE WHITE STROBE FUNCTION
1. Unscrew the tailcap one half revolution to the lockout position.
2. Press and hold the button.
3. Whileholdingthebutton,tightenthetailcapandthenreleasethebutton.
4. To reactivate the strobe function, repeat steps 1, 2 and 3.
TO REVERSE THE WHITE LIGHT POWER SEQUENCE
The white light feature has been set to high/low power sequence as a default. To reverse
the order to low/high sequence:
1. Press the button twice to activate the low power setting.
2. Press and hold down the button for approximately 5 seconds. The light will turn
off and then blink three times; the default will change from high/low to low/high
sequence. Release the button.
3. To return the setting to high/low power sequence, return to the low power setting
and repeat step #2.
MAINTENANCE /CLEANING INSTRUCTIONS
Your INFORCE flashlight has been designed to provide maximum performance with
minimum maintenance. Occasionally clean threads with a clean cloth and apply a thin
coat of silicon-based lubricant to the rubber O-ring; see above illustration. Do not use a
petroleum-based lubricant. Should the flashlight become dirty from dust, sand or caked-
on mud, rinse fully assembled light with water and dry with a soft cloth.
NEW PATENT PENDING MULTI-FUNCTION SWITCH
PRODUCT WARRANTY
EmissiveEnergyCorp.(EEC)warrantsourproductsandaccessoriestobefreeofdefectinworkmanshipandmaterialsforthelifetimeoftheoriginalowner.Wewillrepairorreplacetheproduct,
at our discretion, if it is determined by us to be defective. In countries or jurisdictions in which specific restrictions exist on lifetime warranties, EEC provides a 10-year limited warranty. Damage
to the product from misuse, abuse, neglect, use of other than INFORCE brand accessories, disassembly, defective batteries or altering the product from its original state voids the warranty.
Batterypowerdepletionandbatteryexpirationisnotcovered.Thiswarrantyisinadditiontoanddoesnotaffectyourstatutoryrightswithrespecttofaultygoods.
THISCONSTITUTESEEC’SENTIREWARRANTY;WEMAKENOOTHERWARRANTIES,WHETHEREXPRESSORIMPLIED,WITHRESPECTTOTHEPRODUCTS,INCLUDINGANDWITHOUTLIMITATION
TOWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.EXCEPTFORTHEEXPRESSWARRANTYTOREPAIRORREPLACETHEPRODUCTASSETFORTHABOVE,EEC
ISNOTRESPONSIBLEFORANYDIRECT,SPECIAL,INCIDENTAL,CONSEQUENTIAL,EXEMPLARYORINDIRECTCOSTSORDAMAGES,REGARDLESSOFTHEFORMOFACTION,WHETHERIN
CONTRACT,TORT(INCLUDINGNEGLIGENCE),STRICTLIABILITYOROTHERWISE,EVENIFEECHASBEENADVISEDOFTHEPOSSIBILITYTHEREOF,NORISEECLIABLEFORANYSUCHCOSTSOR
DAMAGESCAUSEDBYMISUSE,NEGLIGENCE,MALFUNCTION,ALTERATIONORMODIFICATIONOFANYINFORCEPRODUCTS.BECAUSESOMESTATESDONOTALLOWTHEEXCLUSIONOR
LIMITATIONOFLIABILITYFORCONSEQUENTIALORINCIDENTALDAMAGES,INSUCHSTATESEEC’SLIABILITYISLIMITEDTOTHEFULLEXTENTPERMITTEDBYLAW.
©2011 Emissive Energy Corp.
EmissiveEnergyCorp.,135CircuitDrive,NorthKingstown,RI02852USA;Tel:401-294-2030;Fax:401-294-2050;www.inforce-mil.com
INFORCEandEMISSIVEENERGYareregisteredtrademarksand6vxand9vxaretrademarksofEMISSIVEENERGYCORP.Thedistinctiveshapes,styles,packagingconfigurations and overall
appearancesofallINFORCEflashlightsandlightingproductsaretrademarksofEMISSIVEENERGYCORP.DesignedandmanufacturedunderoneormoreofthefollowingU.S.andInternational
patents: U.S.: 6,966,677; 7,121,680; 7,153,004; 7,226,183; 7,517,108; 7,652,303; 7,784,963; D526,730; D565,220; D579,201; D596,329; D619,283.
European: 467295-0001; 467295-0002. Other U.S. and International patents are pending.
DesignedandassembledintheU.S.A.ofdomesticandforeigncomponents.Thisproductqualifiesas“AmericanMade”undertheBuyAmericaAct.
PI-INF-ZF-6VX/9VX/111807
O-RING
THREADS
