InfraTec VarioCAM Manuale utente

InfraTec GmbH

Infrarotsensorik und Messtechnik

Gostritzer Straße 61 – 63

01217 Dresden/GERMANY

phone +49 351 871-8615

fax +49 351 871-8727

e-mail [email protected]e

www.InfraTec.eu

(All the stated product names and trademarks remain in

property of their respective owners.)

VarioCAM®hr head

incl. IRBIS®remote 3.0 software description

User Manual

State: November 2015

incl. IRBIS®remote 3.0 software description VarioCAM®hr head

Table of Contents

User Manual © InfraTec GmbH 2015 I

Table of contents

1Introduction ...................................................................................................................1

2Advice on Device Safety...............................................................................................3

3Technical Description ...................................................................................................5

3.1 Operating Principle.........................................................................................................................5

3.2 Description of the Functional Units ................................................................................................5

3.3 Technical Data ...............................................................................................................................9

4Unpacking and Checking ...........................................................................................10

5Description of Camera Parts ......................................................................................11

6Quick Start ...................................................................................................................12

6.1 Preparation...................................................................................................................................12

6.2 Installation Software IRBIS®remote ...........................................................................................12

6.3 Start..............................................................................................................................................12

6.4 Display..........................................................................................................................................13

6.5 Image Optimisation ......................................................................................................................13

6.6 Data Storage ................................................................................................................................14

6.7 Menu Functions............................................................................................................................14

6.8 Switching OFF..............................................................................................................................14

6.9 Data Transfer to the Computer ....................................................................................................15

6.10 Evaluation with Analysing Software IRBIS®.................................................................................15

7Starting up ...................................................................................................................16

7.1 Using a Tripod* ............................................................................................................................16

7.2 Connecting the Power Supply......................................................................................................16

7.3 Inserting a Memory Card..............................................................................................................16

7.4 Lens Replacement .......................................................................................................................16

7.5 Operation via the FireWire (IEEE 1394) Interface*......................................................................17

7.6 Operation with Breakout Box (Connection via RS232)* ................................................................2

7.7 Trigger Functionality VarioCAM®hr head ......................................................................................3

8Hardware and Software Installation for VarioCAM®hr head* ...................................5

8.1 Fundamentals ................................................................................................................................5

8.2 Hardware Components ..................................................................................................................5

8.3 Installation of the FireWire Driver for the VarioCAM®hr head.......................................................6

9Operation .....................................................................................................................13

9.1 Elements of the Graphical User Interface ....................................................................................13

9.2 Live Mode.....................................................................................................................................14

9.3 Focus Mode .................................................................................................................................16

9.4 Spot Editor* ..................................................................................................................................17

9.5 Stop Mode and Data Storage ......................................................................................................20

9.6 The Main Menu ............................................................................................................................22

9.6.1 Menu "Image"...............................................................................................................................22

9.6.2 Menu "File"...................................................................................................................................27

9.6.3 Menu "Measure"...........................................................................................................................33

incl. IRBIS®remote 3.0 software description VarioCAM®hr head

Table of contents

II © InfraTec GmbH 2015 User Manual

9.6.4 Menu "Settings"............................................................................................................................37

10 Operating Software IRBIS®remote 3.0* .................................................................... 49

10.1 Programme Start ..........................................................................................................................49

10.2 User Interface...............................................................................................................................50

10.2.1 Analog Video Display ...................................................................................................................50

10.2.2 Menu Bar with Quick Keys ...........................................................................................................51

10.2.3 Menu Item “Options”.....................................................................................................................52

10.2.4 Data Transfer ...............................................................................................................................54

10.2.5 Controls for Direct Control............................................................................................................56

10.2.6 Allocation of Functional Keys .......................................................................................................57

11 Maintenance of the Device ......................................................................................... 58

11.1 Cleaning of lenses and protective windows .................................................................................58

11.2 Calibration ....................................................................................................................................58

12 Environmental Protection .......................................................................................... 59

13 Service .........................................................................................................................60

User Manual for the Thermographic System VarioCAM®hr head

1. Introduction

User Manual © InfraTec GmbH 2015 1

1Introduction

Dear User,

Congratulations on the purchase of your new thermographic system VarioCAM®hr head.

Please read these instructions carefully before operating the system for the first time. This will enable you

to make full use of the features of your new thermographic system. Please especially note the advice

regarding device safety in Chapter 2 in order to avoid damage to the thermographic system.

All the specifications in this user manual describe a completely equipped thermographic system

VarioCAM®hr of the “head” series. Technical data, the scope of features and accessories included in

your thermographic system may deviate from the specifications described here depending on the model

chosen and on individual adjustments. Features relating to optional equipment are marked *in this

manual.

Principally, the description of technical data and the specific scope of features provided in the relevant

shipping documents (confirmation of order/delivery note) apply.

Further development is subject to technical progress.

Jenoptik ESW GmbH

07745 Jena / GERMANY

InfraTec GmbH

01217 Dresden / GERMANY

Phone: +49 351 871-8615

Fax: +49 351 871-8727

E-mail: [email protected]

Note:

No part of this instruction manual may be reproduced in any form (print, photocopy, microfilm or any other

method) or processed, duplicated or distributed using electronic systems without the written permission of

JENOPTIK Laser, Optik, Systeme GmbH. This instruction manual was compiled with the necessary

diligence. No liability is accepted for damage arising from non-observance of the information contained in

this instruction manual.

Any product names and trademarks mentioned herein remain the property of their respective owners.

User Manual for the Thermographic System VarioCAM®hr head

1. Introduction

2 © InfraTec GmbH 2015 User Manual

VarioCAM®high resolution head (hereinafter VarioCAM®hr head) is a modern thermographic system for

the precise, quick and non-contact measurement of surface temperatures of objects. Its compact and

robust design and high degree of protection make it especially suitable for industrial applications even

under unfavorable external conditions. Its low weight as well as its long battery life provide for its effective

use.

A wide range of accessories and several software packages for handling images and their further

processing make the VarioCAM®hr head a universal thermographic system for use in a wide field of

applications.

Its high measuring precision, precision lenses of extraordinary imaging quality and its universal interface

design for the digital recording of real-time thermographic data via FireWire/IEEE 1394* permit the

application of the VarioCAM®hr head in the most varied fields of research and development.

Typical applications of the thermographic system include:

■Inspection of electrical and mechanical systems and power units

■Optimisation of components and units

■Control of process temperatures

■Quality assurance

User Manual for the Thermographic System VarioCAM®hr head

2. Advice on Device Safety

User Manual © InfraTec GmbH 2015 3

2Advice on Device Safety

General

The VarioCAM®hr head is a high-quality, thoroughly calibrated optical measuring instrument. Handle it

with appropriate care. Avoid soiling it, particularly its optical surfaces.

The device has protection class IP 65.

Please observe the conditions specified under Technical Data (see Chapter 3.3, Technical Data, page 9)

for use, save and transport of the device.

For transporting the VarioCAM®hr head, exclusively use the transportation case included.

Opening the camera case is reserved for customer service or authorised staff only. Any interference by

the user or unauthorised persons is not permitted and will void any warranty.

Only use accessories or spare parts which are expressly recommended by JENOPTIK Laser, Optik,

Systeme GmbH for use with the VarioCAM®hr head. Otherwise malfunctions or damage can occur.

Warranty shall be excluded for such damage.

Standards, Guidelines

The VarioCAM®hr head complies with the requirements of the following standards:

■EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and

laboratory use – Part1: General requirements (IEC 61010-1:2011)

■EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use – EMC

Requirements – Part1: General requirements (IEC 61326-1:2005)

User Manual for the Thermographic System VarioCAM®hr head

2. Advice on Device Safety

4 © InfraTec GmbH 2015 User Manual

Handling

The VarioCAM®hr head is equipped with a highly sensitive uncooled microbolometer detector. Object

radiation occurring in thermographic practice does not cause any changes in the detector. However,

black-body radiation overdrive exceeding 1,000 °C in measuring ranges 1 and 2 or 2,000 °C in

measuring ranges 3 and 4, may result in irreversible damage and must therefore be avoided by

selecting a suitable calibration range* prior to measuring.

The VarioCAM®hr head must, neither in operation nor when switched off, directly be focused into the

sun or other sources of intensive radiation (e.g. lasers), since this may result in changes of the

microbolometer detector, whose origin can unambiguously be proven. The manufacturer waives any

warranty for such damage.

It is also imperative to avoid indirectly capturing any sunlight or other highly energetic radiation via

reflective surfaces directed into the field of view of the VarioCAM®hr head!

Under certain conditions, it cannot be excluded, even when the system is switched off, that the

detector may be damaged when directed into sunlight. Therefore, when the VarioCAM®hr head is not

in use, the lens must be capped with the protective cover included.

Only use SecureDigital cards in the SD slot of the VarioCAM®hr head. Otherwise damage to the

camera or the memory card can arise, for which no liability will be accepted.

Lens changes should not be carried out in rooms of high dust load or humidity, since IP 54 protection

class is not guaranteed with the lens removed.

User Manual for the Thermographic System VarioCAM®hr head

3. Technical Description

User Manual © InfraTec GmbH 2015 5

3Technical Description

3.1 Operating Principle

The VarioCAM®hr head is a thermographic system for the long wave infrared spectral range (LWIR) of

(7.5 ... 14) µm. The lens images the object scene onto a microbolometer array at a resolution of

(640 x 480) or (384 x 288) pixels. The electrical signal of the detector arrays is further processed by the

internal electronics. The electronics contains all the functions necessary for camera operation, such as

activation of the microbolometer array, A/D conversion, offset and gain correction, defective pixel

treatment, video and PC interfaces.

Operating the system is effected via the PC interfaces, available as FireWire (IEEE 1394) and RS232*.

The use of these interfaces which are available depending on their versions of equipment requires special

software packages. You will find relevant details from Chapter 8 on, Hardware and Software Installation

for VarioCAM®hr head*, page 5.

3.2 Description of the Functional Units

Lens

The camera lens captures the IR radiation emitted by the object in the field of view and images it on the

detector array. Field of view (FOV) and resolution/size of the measuring point (IFOV, Instantaneous Field

of View) are determined at the same distance from the focal length f of the lens used.

The following standard lenses are available:

Thermographic system of resolution (384 x 288) pixels

lens focal length (mm) min. focus (m) IFOV (mrad) FOV (°)

wide-angle lens 12.5 0.2 2.8 (57 x 44)

standard lens 25 0.3 1.4 (30 x 23)

telephoto lens 1 50 2.0 0.7 (15 x 12)

telephoto lens 2 75 2.0 0.47 (10 x 8)

telephoto lens 3 130 5.0 0.27 (6 x 4)

close-up lens focal length (mm) focus (mm) field of view (mm²) resolution (μm)

close-up 0.17x for 25 149 (80 x 60) 209

close-up 0.5x for 25 50 (27 x 20) 70

microscopic lens 1.0x - 50 (13 x 10) 35

User Manual for the Thermographic System VarioCAM®hr head

3. Technical Description

6 © InfraTec GmbH 2015 User Manual

Thermographic system of resolution (640 x 480) pixels

lens focal length (mm) min. focus (m) IFOV (mrad) FOV (°)

wide-angle lens 12.5 0,2 2.0 (65 x 51)

standard lens 30 0,3 0.8 (30 x 23)

telephoto lens 1 50 2,0 0.5 (18 x 14)

telephoto lens 2 75 2,0 0.3 (12 x 9)

telephoto lens 3 130 5,0 0.2 (7 x 5)

close-up lens focal length (mm) focus (mm) field of view (mm²) resolution (μm)

close-up 0.17x for 30 150 (80 x 60) 125

close-up 0.5x for 30 50 (27 x 20) 42

microscopic lens 1.0x - 50 (16 x 12) 25

Detector

The VarioCAM®hr head has an uncooled microbolometer FPA detector (uncooled Focal Plane Array).

The detector is thermally stabilised with high precision using a Peltier element and is thus independent of

the ambient temperature.

The various elements of the detector are microscopically minute thin-film resistors on wafer-thin

membranes, which are arranged cantilevered a few micrometers above the silicon read-out circuit. The

thermal radiation of the scene is imaged by the lens of the thermographic system on these detector

elements and absorbed by them. The temperature change of the detector elements resulting therefrom

yields electronically evaluable signals which can be read out line-wise and column-wise by a read-out

circuit.

Applying an uncooled detector guarantees quick availability of the camera function after switching it on

(start-up time < 60 seconds) and long service life (MTTF) in permanent use.

Detector electronics

The detector electronics supplies the BIAS voltages required for detector operation and further control

signals, and it takes care of the pre-processing and digitalisation of the analog video output signal from

the detector.

Image processing electronics

Real-time image processing with the following essential functions (depending on the equipment) is

implemenmted with the help of an FPGA (Field Programmable Gate Array) and an embedded PC

(modular compact internal PC):

■Detector electronics interface

■Gain and offset correction

■Defective pixel treatment

■Low-pass filtering

■Zoom generator

■Graphic overlay

■FireWire (IEEE 1394) interface

■Embedded PC interface

■Standard-format video-image generator (PAL/NTSC-FBAS, S-Video, RGB)

Altri manuali per VarioCAM

Indice

Altri manuali InfraTec Telecamera termografica

InfraTec

InfraTec InfraTec Manuale utente

Manuali Telecamera termografica popolari di altre marche

Hikmicro

Hikmicro HM-TD3117T-1/Q Manuale utente

optris

optris PI 160 Manuale utente

Perfect Prime

Perfect Prime IR0001 Manuale utente

FLIR

FLIR E4 Manuale utente

FLIR

FLIR T420-NIST Manuale utente

ICI

ICI 8000 Series Manuale utente

Hikmicro

Hikmicro BX20 Manuale utente

ICI

ICI SOUND DETECT Manuale utente

Perfect Prime

Perfect Prime IR0175 Manuale utente

HT THT80 Manuale utente

ICI

ICI TRACE IR 25 Series Manuale utente

Qvis

Qvis PX-SDH2010 Manuale utente

WORKSWELL

WORKSWELL GIS 320 Manuale utente

FLIR

FLIR Navigator II Manuale utente

FLIR

FLIR E6-XT Manuale utente

FLIR

FLIR Scout TS32r Pro Manuale utente

Eneo

Eneo VKC-1327C Manuale utente

FLIR

FLIR ThermaCAM P65 Manuale utente