ING SPEEDBIRD 163E Manuale utente
3 Axis Gimbal
User Guide
Table of Contents
Product Description
Introduction
Prepare the Drone
Prepare the Controller
Parts Name
1
1
2
2
Flight Mode
The Status Indicator Light of Drone
Return Home Automatically
Optical Flow System
Gimbal Camera
Power Switch of the Drone
Drone Battery
Assemble & Disassemble the Propellers
Drone
4
5
6
7
9
9
10
11
Function&Situation of Controller
Controller Joystick Mode
Assemble Phone Holder
Controller
12
15
16
FPV Real Time Transmission Software
M RC PRO App
17
Surrounding Requirements of the Flight
Pre-Flight Inspection
The Operation of Drone
Basic Flight
Flight
18
18
18
22
Drone Specification
Packing List
Important Statement
Safety Precautions
Appendix
23
25
26
26
IMPORTANT: Check your license requirements with the FAA before you fly.
https://www.faa.gov/uas/getting_started/register_drone/
Product Description
Reminder: If the battery is not installed properly, it may cause the drone to fall down due to
power failure.
Expand the Arms
Install Drone’s Battery
Before installing the battery for flight, make certain it is fully charged.Press straight down and push
into the drone,make sure the battery install correctly.
Disassemble the gimbal protection lock
Prepare the Drone
Introduction
Pull out the protective cover
of gimbal camera.
-1-
SPEEDBIRD I63E is equipped with optical flow and GPS and is capable of hovering and flying steadily
indoors and outdoors. It is equipped with automatic return home and easy-to-use intelligent flight, such
as Orbit Flight, Follow-Me and Waypoint Flight. It can shoot 4K HD video with a high precision 3 axis
anti-shake gimbal. The drone has functional buttons that can control various operations and settings
of the drone and camera. The App will display real time HD images and flight information. Always put
safety first when flying. Enjoy your ING SPEEDBIRD I63E.
Carefully unfold the arms in the motion of the arrows below.
[6]
[7]
[8]
[5]
[1]
[2]
[3]
[4]
-2-
B
[12]
[1]
[2]
[3]
[5]
[4]
[7]
[8]
[6]
[1] Take picture/video
[2] Left joystick
[3] One key to unlock/
Lock
[4] Phone holder
[5] One key return home
[6] Right joystick
[7] Power switch
[8] Status display screen
[9] One key to take off/
landing
[10] Gimbal control
hand wheel
[11] Short press for
light control/
Long press for fast
slow speed switch
[12] GPS Switch
[9] [11]
[10]
I63E User Guide
-3-
OFF ON
The following flight modes are available in I63E.
In GPS mode, the drone achieves precise hovering by receiving GPS signals. If the GPS signal is
weak, the drone will enter Fix-Altitude Mode or Optical Flow Position mode.(Please refer to the status
bar for specific status in App.)
When the GPS signal is weak, please land to safe place immediately avoiding any accidents. At the same
time, please avoid flying in a weak GPS signal or a narrow space to avoid accidents.
GPS Mode
Optical Flow Position height is 3m. If you exceed this height, the drone will lose control.
Optical Flow Position Mode
Drone
Flight Mode
-4-
If you cannot receive the GPS signal or if the GPS is turned off, the drone will enter the Optical Flow Position
mode
If you cannot receive the GPS signal or if the GPS is turned off, the drone will enter the Optical Flow Position
mode. In this mode, the drone can hover stably by optical flow system.
1Front and rear indicator light flash
yellow quickly. Drone and controller have not connected.
2Front and rear indicator light flash
yellow green red in turns. Drone is in the initialization detection state.
6Front and rear light flash yellow
in turns.
Drone is in geomagnetic horizontal
calibration.
7 The front and rear light flash green in turns. Drone is in geomagnetic vertical calibration.
8Front light stays red, the rear light
flashes red slowly.
Drone is close to low battery,
only 16% power left.
9Front light stays red, the rear light
flashes red quickly.
Drone is in low battery,
only 12% power left.
10 Front and rear light flash red once,
stop about 1.5s. Gyroscope has a malfunction.
11 Front and rear light flash red twice,
stop about 1.5s. Barometer has a malfunction.
12 Front and rear light flash red three times,
stop about 1.5s. Compass has a malfunction.
13 Front and rear light flash red four times,
stop about 1.5s. GPS has a malfunction.
No.
3Front indicator light stays in red,
the rear indicator light stays in yellow. No GPS signal.
4Front indicator light stays in red,
the rear indicator light stays in green.
Good GPS signal, available to enter into
GPS mode.
5 Front and rear light flash green quickly. Drone is in gyroscope calibration.
Indicator light status Meanings
Status Indicator Light Definitions
Status Indicator Lights on Drone
Front indicator
light
Rear indicator light
Front indicator light
I63E User Guide
-5-
-6-
f
c
When this occurs all indicator lights change from yellow
to green.
To cancel return-home, press again and the drone will return to flight control mode.
2. When the Red indicator lights flash quickly, the Power icon in the controller shows and a continuous
beeping sound is emitted; if the flight altitude or distance is greater than 15 meters , the drone will return
to the home point automatically.
Return Home Beyond Control Distance
Notes on Return Home:
Please be aware that when the drone is in Return Home mode, it will fly straight to the home
point and will not be able to avoid obstacles.
altitude can be set 15~120m
When the GPS signal is weak or not working, or has been interrupted for more than 6 seconds,
the drone will not be able to return to the home point. It will descend slowly until landing, then it
will lock.
One Key to Return Home
Return Home in Low Power
When the Red indicator lights flash slowly, the Power icon in the controller shows and a continuous
beeping sound is emitted; if the flight altitude is between 30 and 100 meters, the drone will return to the
home point automatically.
I63E is equipped with auto Return home function. It include One key to Return Home , Return Home in
low battery power and Return Home in lost control signal. Under good GPS signal, I63E will automatic
fly back to home position and land automatically once pressing Return Home key / Low battery and lost
control signal condition.
Usage requirements of Optical Flow Positioning
Please note, Optical Flow Positioning works when flying at altitude below 3 meters.
Optical Flow System
I63E User Guide
Optical flow lens
The optical flow system is composed of optical flow lens modules. It is an image positioning system
that locating the drone by optical flow images. It ensures the accurate positioning and safe flight of
the drone.
Measurement accuracy to the Optical Flow System (OPS) is easily affected by light intensity
and texture of the surface. If the OPS fails the drone will automatically switch to fixed altitude
mode. Below is a list of conditions that can cause failure to the OPS:
1. Flying fast at low altitude (below 0.5 meters).
2. Flying over monochrome surfaces such as pure black, pure white, pure red etc.
3. Flying over surfaces with strong reflections.
4. Flying over water or transparent surfaces.
-7-
I63E User Guide
5. Flying over moving objects such as upside of clouds, swaying trees or grasses, etc.
6. Flying over surfaces with rapid light changes.
7. Flying over extremely dark surfaces (Lux<10) or extremely bright surfaces (Lux>10,000).
8. Flying over very smooth surfaces.
9. Flying over surfaces with significant repeated textures such as same color brick.
10. Surfaces that are angled over 30 degrees.
For best results with OPS, maintain moderate drone flying speed without rapid changes.
Recommended speeds:
-8-
Insure the OPS lens is clear.
OPS Check List & Requirements
The OPS is only effective in altitude less than 3 meters.
The surface area must have sufficient light source and rich textured ground.
In dim light conditions, turn on the Optical Flow Fill Light.
Altitude Max speed
1
2
<5m/s
<8m/s
Indice
