Ingrasys IPoMan II-1200 Manuale utente

Power Distribution Unit

(iPoMan II-1200)

iPoMan II-1200

~2~

Preface

About this Manual

Congratulations on purchasing the iPoMan II-1200. This user

manual provides detailed descriptions of the hardware

components and how to use the iPoMan II-1200. Read this

manual carefully and follow the instructions while using the

iPoMan II-1200.

No part of this manual, including the products and software

described in it, may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language in

any form or by any means, except documentation kept by the

purchasers for backup purposes, without the express written

permission of the manufacturer.

Products and corporate names appearing in this manual may or

may not be registered trademarks or copyrights of their

respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to

infringe. All trademarks are the property of their respective

owners.

iPoMan II-1200

~3~

Safety Instructions

Follow these safety instructions to avoid injury to self and

damage to the iPoMan II-1200.

•To reduce the risk of fire or electric shock, install the

unit in a temperature-controlled indoor area free of

conductive contaminants. Do not place the unit near

liquids or in an excessively humid environment.

•Do not allow liquids or foreign objects to enter the unit.

•The unit does not contain any user-serviceable parts. Do

not open the unit.

•Servicing, maintenance, and repair for this equipment

must be performed by qualified service personnel.

Remove rings, watches and other jewelry before

servicing the unit.

•Before maintenance, repair or shipment, the unit must be

completely switched off and unplugged and all

connections must be removed.

•Before plugging in the power cord of the device, make

sure that the power source rating matches the power

rating of the iPoMan II-1200.

•Use a standard power cord when connecting any device

to the outlets of iPoMan II-1200.

•The digital output only can connect switches, indicators,

or other output devices that are normally open or

normally closed.

iPoMan II-1200

~4~

Safety Notices

Caution:

This unit has been provided with a real time

clock circuit. There is a danger of explosion

if the battery is incorrectly replaced.

Replace only with a 3V Lithium cell

(CR2032) or equivalent type. Discard used

atteries according to the manufacturer’s

instructions.

Caution:

Rack-Mounted Equipment – The unit is

intended to be rack-mounted, the

Installation Instructions shall contain

wording to address the following concerns

when the unit is mounted in a rack system.

“The equipment is to be installed

in an environment with maximum

ambient temperature must not

exceed 50°C.”

B. “The openings on the enclosure

are for air convection hence

protected the equipment from

overheating. DO NOT COVER

THE OPENINGS.”

C. “Lay this equipment on a reliable

surface when install. A drop or

fall could cause injury.”

D. “The equipment shall be installed

according to specification as

nameplate. Make sure the voltage

of the power source when connect

the equipment to the power outlet.

The current of load and output

iPoMan II-1200

~5~

power of loads shall be not over

the specification.”

E. “This equipment must be

connected to the reliable earth

before using.”

iPoMan II-1200

~6~

Table of Content

Preface......................................................................... 2

About this Manual................................................................... 2

Safety Instructions .................................................................. 3

Safety Notices......................................................................... 4

Introduction the iPoMan II-1200.............................. 7

Features................................................................................... 8

Package Contents.................................................................... 9

Hardware Components.......................................................... 10

Getting Started ......................................................... 14

Attaching the Feet................................................................. 14

Attaching the Ears................................................................. 14

Rack Mounting...................................................................... 14

Making Connections............................................................. 15

Daisy Chaining...................................................................... 20

Using the Console Menu.......................................... 23

Using HyperTerminal ........................................................... 23

Navigating through the Console Menu................................. 25

Setting the IP Address........................................................... 27

Using the Web Interface.......................................... 28

Overview............................................................................... 28

Modifying the Basic Settings................................................ 29

Modifying Application Settings............................................ 31

Appendix................................................................... 35

Specifications........................................................................ 35

Error codes............................................................................ 37

Regulatory Information......................................................... 38

iPoMan II-1200

~7~

Introduction the iPoMan II-1200

Congratulations on purchasing the iPoMan II-1200, an

intelligent power management system. The iPoMan II-1200 is

designed to measure the input and individual outlet current

consumption and auto email history report to supervisor for

power bill charge. At the same time, the iPoMan II provides the

useful ability of managing power for any combination of

network equipment connected to it. User can control the power

on/off for any device connected to the iPoMan II-1200,

remotely, using a console or Ethernet connections. The iPoMan

II-1200 comes with twelve power outlets, each of which can be

monitored and controlled through the console or web interfaces.

The iPoMan II-1200 is also equipped with a console port for

connecting an EMD (Environmental Monitoring Device) for

sensing temperature and humidity along with two alarms that

can be activated when either of the sensors shows unusual

values. The iPoMan II-1200 is provided with two digital outputs

which users can use for connecting status indicators or digital

switches.

iPoMan II-1200

~8~

Features

•To calculate the power consumption on hourly basis, and

have an accumulation of daily

•Provide detail data-logging for statistical analysis and

diagnostic then auto email daily history report

•Daisy-chaining can cascade up 6 pieces iPoMan II

•Sequential power-up on the outlets / Allows users to

configure the sequence in which power is turned on or

off for each outlet

•Intelligently turn on/off devices based on event

occurrence or planned schedule

•Event notification by pop-up/Sending Trap or E-Mail for

events notification

•Twelve power outlets that can be turned on or off in

multiple ways, with easy monitoring of current

consumption

•Set over-current watchdog for each outlet (Threshold

settings for over-current warnings and alerts)

•Versatile sensors supported through EMD

(Environmental Monitoring Device) inputs

•Activate extended devices via digital outputs

•Comprehensive power management and flexible

configuration through web browser, NMS, Telnet,

SNMP, or HyperTerminal (console)

•Support Secure Socket Layer V3 and Secure Shell V1

protocols

•Administrator and multiple users with password

protection for double-layer security

•Address-specific IP security masks to prevent

unauthorized access

•User-friendly interface to display input and output status

•Upgrade utility for easy firmware upgrade

•Available in 120V and 230V models

iPoMan II-1200

~9~

Package Contents

Make sure the iPoMan II-1200 package has the following items.

If any of items is missing or damaged, contact your nearest

service center or vendor.

1. iPoMan II-1200

2. Ears (x2)

3. U-type handles (x2)

4. U-type handle screws (x4)

5. Ear screws (x6)

6. Feet screws (x4)

7. Software CD

8. Feet (x4)

9. Quick Install Guide

10. Power cord (x2) for 2-inlet model;

Power cord (x1) for 1-inlet model

11. Serial cable

iPoMan II-1200

~10~

Hardware Components

Take a moment to familiarize yourself with the iPoMan II-1200

front and rear panels. The following sections provide

descriptions about the front and rear panel components and how

to use them.

Front Panel of 2-inlet Model

Front Panel of 1-inlet Model

Component Description

1. Input power status

indicator 2-inlet Model: Display power status for

each input power G1 through G2

1-inlet Model: Display power status for the

input power G1

2. Output power status

indicator (A ~ L) Display power status for each power outlet

A through L

3. Status indicator Display input current, voltage, frequency,

8 9

Altri manuali per iPoMan II-1200

Indice

Altri manuali Ingrasys Unità di distribuzione dell'energia

Ingrasys

Ingrasys iPoMan 8000 Manuale utente

Manuali Unità di distribuzione dell'energia popolari di altre marche

hager

hager SP 015 Manuale utente

Pakedge

Pakedge PowerPak 9 Manuale utente

Pts

Pts 9042 Series Manuale utente

Shure

Shure WA405 Manuale utente

CORNING

CORNING CCH 4U Manuale utente

Panamax

Panamax M4LT-EX Manuale utente

PANCONNECT

PANCONNECT FLAT 3M Manuale utente

Raytheon

Raytheon 138-118 Manuale utente

D&R ELECTRONICS

D&R ELECTRONICS PDU-6SS Manuale utente

Botex

Botex PSA 322-6 DL Manuale utente

GE QuiXtra 4000 Guida rapida

RDL

RDL EZ Series Manuale utente

StarTech.com

StarTech.com RKPW161915 Manuale del sistema

Vertiv

Vertiv Knürr DI-Strip Rack PDU Manuale utente

ABB

ABB PSBS0065 Manuale

Baumuller

Baumuller BFN 3-1-0007-001 Manuale

Eaton

Eaton StructuredWiringSolutions ESWT41600 Manuale

GE GEK-45404F Manuale utente

Ingrasys iPoMan II-1200 Manuale utente

Manuali Unità di distribuzione dell'energia popolari di altre marche