Init NT-WGM1150 Manuale utente
ASSEMBLY
INSTRUCTIONS
NT-WGM1150
50" 3-in-1 TV Stand with
Integrated Mount
Safety information and specifications ..................... 2
Tools needed..................................................................... 4
Parts...................................................................................... 5
Hardware ............................................................................ 6
Assembly instructions.................................................... 8
Finishing the table top assembly.........................13
Finishing the swivel mount assembly ................14
Finishing the wall-mount assembly....................22
2
Still need help? Call 800-573-2860
Safety information and specifications
CAUTION: This stand’s glass work
surface is intended only for use with a
product not weighing more than 100 lbs.
(45.5 kg) and having a width that will
permit it to sit evenly on the stand with no more
than a one-inch overhang on each side on the top
shelf. Using with other products, including
products that weigh more than the maximum
weight allowed or extend beyond the maximum
width, may result in instability, which may cause
possible injury.
Caution: This product contains small items that
could be a choking hazard if swallowed.
Keep these items away from young children!
Do not lift the glass by the support posts. See
instructions for more details.
Model #: NT-WGM1150
Distributed by Best Buy Purchasing, LLC
Manufacturer: Alart, Inc.
Manufacture Date:
Maximum weight: 100 lbs. (45.5 kg)
Maximum width: 1-inch overhang on each side of
the top shelf
Top shelf (W × D):
50 × 19" (127 × 48.26 cm)
Middle shelf (W × H × D):
44.25 × 9.5 × 15.5" (112.39 × 24.13 × 39.37 cm)
Bottom shelf (W × H × D):
44.25 × 10.13 × 18.13" (112.39 × 25.73 × 46.05 cm)
3
Still need help? Call 800-573-2860
19" (48.26 cm)
19" (48.26 cm)
53" (134.62 cm)
50" (127 cm)
30"(76.2 cm)
17" (43.18 cm)
4
Still need help? Call 800-573-2860
Tools needed
(For optional TV wall mounting)
Drill
Phillips screwdriver
Stud finder
Level
Hammer
Drill bit for
stud wall 3/8" drill bit
for concrete
wall
OR
Pencil
5
Still need help? Call 800-573-2860
Part s
Package contents: parts
AStand body (1) BTop frame (1) CBottom frame (1)
DTop shelf frame-wood(1)
ETop shelf-glass(1) FMiddle shelf-glass (1) GBottom shelf-glass(1)
PTilt mount (1)NVertical support (1) RTV bracket (2)
6
Still need help? Call 800-573-2860
Hardwa re
Package contents: stand hardware
Note: You may receive extra hardware.
Make sure you have all the hardware necessary to assemble your new TV stand:
Label Hardware Qty.
H2
I4
J4
K2
L2
Small
thumbscrew
Medium
thumbscrew
Large
thumbscrew
Long
thumbscrew
Shelf support
An optional anti-tipping hardware kit is included.
Instructions on how to install the hardware are
included on the bag containing the kit.
Label Hardware Qty.
M2
Q1
R2
S1
T1
Shelf lock
Pivot plug
TV mount
bracket
For Steel
Touch-up pen
for steel
For Wood
Touch-up pen
for wood
10 20 30 40 50 60 70 80 90 100mm
1234in
7
Still need help? Call 800-573-2860
Wall-mount hardware
Package contents: wall-mount hardware
Note: You may receive extra hardware.
Make sure you have all the hardware necessary to assemble your new TV stand:
Label Hardware Qty.
D2
E4
F4
G4
H4
I4
J4
Safety bolt (2)
M4 × 12 m
m
bolt
M4 × 16 mm
bolt
M5 × 16 mm
bolt
M6 × 16 mm
bolt
M8 × 16 mm
bolt
M5 × 36 mm
bolt
Label Hardware Qty.
K4
L4
M4
N4
P4
Q4
R4
M6 × 36 mm
bolt
M8 × 36 mm
bolt
Square
washer
Long bolt
Wall anchor
Long bolt
washer
Spacer
8
Still need help? Call 800-573-2860
Assembly i nstructions
Step 1 Unfold the stand body (A), then insert the shelf supports (L) into the side frames.
You’ll need:
L(2)
9
Still need help? Call 800-573-2860
Step 2 Attach the top frame (B), then secure it into place with two large thumbscrews (J).
Note: Make sure the front of top frame (B) engages with the side supports on the stand body.
You’ll need:
J(2)
10
Still need help? Call 800-573-2860
Step 3 Attach the bottom frame (C), then secure it into place with two large thumbscrews (J).
Note: Make sure the front of bottom frame (C) engages with the side supports on the stand body.
You’ll need:
J(2)
Altri manuali per NT-WGM1150
1
Indice
Altri manuali Init Rack e supporto
