(between 100W-150W) by pressing and holding
” to lock the set
PreBoost Ramp-Up Technology:
What it does:
chip will use to heat the coil to the target
temperature. Press and hold the “ ” power
to cycle from 25-150W and press the “ ”
the coil is not primed, the CoolFire ULTRA
maintenance mode.
Ni Mode: Nickel (Ni200) coils only!
You MUST choose the Ni mode when using a
Ni200 coil in the tank.
Some individuals may be allergic to Nickel (Ni200);
ensure that you are able to vape.
Nickel (Ni200) before using Ni200 coils.
advice immediately.
Ti Mode: Titanium coils only.
You MUST choose the Ti mode when using a
Titanium coil in the tank.
Stainless Steel TC mode:
SS 316L coils are recommended.
You MUST choose the SS mode when using a
Stainless Steel 316L coil in the tank.
W Mode: Non Temperature Control coils.
2
12 13
