Innosys IDB-02S Manuale utente
www.innosys-tech.com
User manual
Bluetooth Low Energy products
BLE Dongle / IDB-02S
www.innosys-tech.com
1
www.innosys-tech.com
CONTENTS
1. BLE Dongle Description ..............................................................................................................................3
1.1 Introduction ...................................................................................................................................................3
1.2 Product Information.................................................................................................................................4
1.3 Product Configuration .............................................................................................................................5
2. App to use it ....................................................................................................................................................6
2.1 Information ...................................................................................................................................................6
2.2Password Setting ........................................................................................................................................7
2.3 Lighting registration.................................................................................................................................8
2.4 General Operation ................................................................................................................................... 10
2.5 Lighting control......................................................................................................................................... 12
2.6 App settings initialization..................................................................................................................... 14
3. Appendix......................................................................................................................................................... 15
3.1 Manufacturer Information.................................................................................................................... 15
3.2 A/S ............................................................................................................................................................. 15
2
www.innosys-tech.com
1. BLE Dongle Description
1.1 Introduction
- IDB-02S
BLE Dongle / IDB-02S is a controller that controls the output of the SMPS and can control the
color temperature and brightness.
It uses the Low Energy Bluetooth 4.0 specification and is supported by both Android and IOS.
The BLE Dongle / IDB-02S has a 4-channel PWM output that controls cool color and warm color.
The color temperature can be adjustedbetween cool and warm colors and the overall output of
the SMPS can be controlled from 0% to 100%.
To use BLE Dongle / IDB-02S, SMPS and gender board are required.
- Gender Board
The gender board distributes power and PWM output between the BLE dongle and the SMPS.
If you are using 1ch SMPS, You have to connect 4pin cable on SMPS connect to J3 on gender B/D.
Using 1CH + 2CH,You have to connect 4pin cable on 1ch SMPS to J3(ch1) on gender B/D and 4
pin cable on 2ch SMPS to J4(ch2) on gender B/D.
Use a 6-pin card edge connector for the BLE dongle and a 4-pin connector for the SMPS.
IDB-02S
Gender
Board
SMPS
3
www.innosys-tech.com
1.2Product Information
SPECIFICATION
Division
IDB-02S
Remarks
Input Power
DC 3.3V
Current Consumption
Max. 30mA
Bluetooth Ver.
Bluetooth Low Energy 4.0
Communication distance
Max. 50m
Output
PWM-4CH
1.56KHz
Storage Temperature
-40 ~ 85℃
Operating Temperature
-10 ~ 45℃
Certification
KC, CE, FCC, ROHS
Dongle Size
100mm X 14mm X 21mm
Gender Size
46mm X 20mm X 10.8mm
Dongle Pin Map
No.
Division
1
DC 3.3V
2
GND
3
CH1-CW
4
CH1-WW
5
CH2-CW
6
CH2-WW
Gender Board Pin Map
No.
J1 Connector
1
DC 3.3V
2
GND
3
CH1-CW
4
CH1-WW
5
CH2-CW
6
CH2-WW
No.
J3, J4 Connetor
1
DC 3.3V
2
GND
3
CW
4
WW
Reset button hole
J1 Connector
M4
Bolt hole
J3
J4
Connector
No 1 pin
4
www.innosys-tech.com
1.3Product Configuration
- Components : IDB-02S 1ea / Gender Board 1ea
- How to assembly:
1. Attach the SMPS and the gender board to the lighting case’s top side using bolt.
2. Connect the 4 pin cable of the SMPS to the J3 connector (CH1) of the gender board when
using 1 channel. When you are using two-channel SMPS, connect each the 4pin cable of SMPS to
the connector (CH1, CH2) each.
3. Insert the BLE dongle into the J1 connector of the gender board fixed to the Lighting.
* NOTICE: The protrusion of IDB-02S connector must be correctly aligned with the hole groove of
the gender board. Please reference to the following figures.
- Reset :
If you forget you’re the password of dongle or need to initialize it,
Press the reset button on the front of the dongle for 5 seconds.
When the reset is completed, the internal green LED flashes once.
After the reset is completed, the password is initialized to 0000
IDB-02S
Gender Board
Reset Button
5
www.innosys-tech.com
2. App to use it
2.1Information
It is an application that controls brightness and color temperature of LED lighting using Bluetooth
function of smart phone.
The lighting in the room, such as living room, kitchen, study room, etc…,and the smart phones
APP are connected using Bluetooth.
It can be used conveniently for LED lighting.
Key Features
- Lighting ON / OFF on the smartphone
- Adjust brightness and color temperature of LED lighting (3000k ~ 5700k)
- Outgoing function on the smart phone APP control multiple lights at once
- Control lighting by groups such as living room, kitchen, study room, etc.
- Lights that turn on and off at the time set by using the wake-up and sleep functions
NOTE
Applications are being distributed on Android-Play Store and iOS App Store.
HANSSEM LIGHTING App and HS dongle App use Bluetooth
Supported Smartphone : Android 4.4 over
Supported Bluetooth: Bluetooth 4.0 / BLE
6
www.innosys-tech.com
2.2Password Setting
Before using the application, the user must set the password of the application to be compatible
with the HS dongle(IDB-02S).
①Click [Register Lighting] when connected for the first time.
②Set up the user's password.
③Confirm the entered password once again.
After completing the above process, you will be able to use the application.
NOTE
- Password can be set only once at the first time
- To change the password, you need to initialize the application settings.
- The password is unique from the moment it is given.
- When the same number is set as the password after the new application is installed,
the dongle will remember it and automatically register the lighting.
7
www.innosys-tech.com
2.3Lighting registration
After the process of setting the password, connection with the HS dongle is possible through
registration of the lighting.
You can register the desired HS dongle by clicking the registration light,
This means that the lighting can be controlled by the application.
- Basic lighting registration
Basic lighting registration refers to the registration only one light on a button icon.
How to register is as follows.
①After setting the password of application, click the registration light on the main screen.
②Select the desired HS dongle from the list of HS dongles whose power is ON.
③Select the location where the light is installed.
④Select the channel according to the lighting number connected to the dongle.
⑤When you have completed your selection, click Register.
⑥When the registration is completed, the registered icon is displayed in orange color.
8
www.innosys-tech.com
- Multiple lighting registration
Multiple lighting registration means registering multiple lights on one icon button.
How to register is as follows.
①With one light already registered, click “register light”.
②Select the desired HS dongle from the list of HS dongles whose power is ON.
③Select the previously registered icon.
④Select the channel to which the HS dongle to register is connected.
⑤When you have completed your selection, click Register.
⑥After registering, press and hold the registered icon on the main screen.
⑦Confirm that double registration is made in the connection status.
NOTE
You can register up to four lights on one icon.
Icons are enabled or disabled only when all lights are on or all lights are off.
Each lighting can be individually controlled through lighting control.
9
www.innosys-tech.com
2.4 General Operation
After the lighting registration is completed, The LED lighting with the dongle installed can be
operated through the application operation.
The general operation is as follows.
- When using basic lighting
After registering the basic lighting, the LED lights up when you click the icon.
The dongle of lighting sends a signal to the application that it is turned on.
The application receiving this signal will indicate to the icon that the LED light is turned on.
Likewise, pressing the activated icon will turn off the LED lighting.
The dongle of lighting sends a signal to the application that it is turned off.
The application receiving this signal will indicate to the icon that the LED light is turned off.
10
Indice
