Innotech ID-767 Manuale utente
OPERATING INSTRUCTIONS
Stand with your weight evenly distributed on the measurement
platform and remain still until the measurement is complete.
Step onto the measurement platform
Batteries installation
For CR2032 Model:
Make sure to remove the
battery pull-tab from the
back of your scales battery
hatch before using the
scale for the first time.
Place the scale on a hard flat surface (not carpet) to ensure
the greatest accuracy and reliability.
2
For AAA Model:
Insert the new batteries, making
sure the plus and minus(+/-)
poles are aligned properly
according to the diagram inside
the compartment.
LOW BATTERY INDICATOR
The scale will display “ ” when the battery is low, please
replace the batteries immediately with two CR2032 batteries.
When you step off the scale, it will automatically switch off.
AUTO OFF
Simply place it on a hard, flat surface, then press it awake and
let it zero out. The scale will be calibrated once it goes to zero,
and then you can step on and reweigh yourself.
CALIBRATION
3
OVERLOAD INDICATOR
When the scale is overloaded (over 397lb/180kg),the screen
will show “ Err ”. Please remove the weight immediately to
protect the scale.
POWER
Battery: CR2032 coin battery x2 or AAA x 3
Please read this instructions carefully before using this scale.
You can change the unit to lb, kg or st by pushing the button
on the back of the scale.
Change the unit
lb pound
kg kilogram
st stone
MEASURING UNITS
4
Cleaning
You can clean your scale using a lint-free cloth
dampened with water. If water is not enough to clean
it, you can also use a mild dish washing soap.
Changing the batteries
Open the battery cover, remove the old batteries and
replace it with new batteries.
Disposal
Dispose of this device in accordance with your local
regulations. Batteries should be disposed of separately from
household waste.
CLEANING,MAINTENANCE,AND DISPOSAL
5
Equipped with high precision gauge sensor
•
•
Safety tempered glass platform
•Capacity: 5kg-180kg/397lb
•
•
•
Graduation: 0.05kg/0.1lb 1/8 lb
•
•
•
Automatic zero resetting
•
Auto-off function
•
•
•
Overload indicator
Weight unit: lb / kg / st
Minimum weight: 5kg
Display: Negative LCD display
Working temperature: 32°F-104°F / 0°C-40°C
Working humidity: ≤90% RH
Storage temperature: -4°F - 140°F / -20°C- 60°C
TECHNICAL SPECIFICATIONS
6
Do not step on the scale when the surface or your feet
are wet to avoid slipping.
Protect the scale from hard knocks, moisture,dust,
chemicals, drastic changes in temperature, electromag-
netic fields and sources of heat that are too close.
Never step on the edge of the scale, it could cause the
scale to tip.
Remove the batteries if the scale is not being used for a
long time.
Do not jump on the scale.
•
•
•
•
•
GENERAL ADVICE
7
Designed by Innotech
Indice
Altri manuali Innotech Scala
