Innov'SA COCOON Manuale utente

7 avenue Bernard Pieds 10110 BAR-SUR-SEINE –FRANCE

Tel: +33(0)3 25 29 40 00 - Fax: +33(0)3 25 29 12 12

Web: www.innov-sa.com - Email: inno[email protected]

MAJ 04/23 - V16

User guide and assembly instructions for

COCOON 1 or 2 motors or XXL seats

1st generation

2nd generation

READ CAREFULLY BEFORE ANY USE

Symbols used in this user guide.

Warning

Indicates a hazardous situation that may cause serious injuries or death. Must be

avoided.

1–USER GUIDE

Make sure nobody and/or nothing can be stuck in the moving mechanism before starting a

complete cycle (up and down movement).

Storage conditions

The COCOON chair must be stored according to the upright mention indicated on the

package, in a dry and temperate aera.

Use conditions.

You must not use this chair before:

- being trained to its operation by the reseller or their installer,

- reading and understanding this guide.

Be sure to leave enough distance (around 60 cm / 24 inches) behind the seat to avoid any

direct contact with the wall when in ‘relax’ position.

Always check nothing can jam or be hidden under the mechanism before each use. The

seat’s mechanism can cause serious injuries. So be very careful in case children or pets are

nearby.

Ensure the seat is placed on a plane non-sloping surface so that the chair is stable on the

ground and can’t slip.

Do not put the seat near any source of significant heat.

Plug the power cable on a mains source compliant to the standards in force and to the

220/230V power unit voltage.

The seat shall not be used if there is any risk of stormy weather. The seat should not be

moved while used.

We recommend a dry shot cycle to get used to the seat’s operation.

Use by children must be forbidden. The leg-rest is not an additional seat. Always unplug

the power cord before moving the seat.

If the quilt gets compact, untighten the Velcro straps and tap it so it can take back its original volume.

To guarantee safety and product compliance, only original parts and accessories distributed by

INNOV’SA must be used.

Any modification of the seat is forbidden and will cause a breach of warranty. Any misuse of

the seat will also cause a breach of warranty. The product shall not be put in full light in order

not to cause the colour fading of the covers.

The two rear casters should not be removed.

Safe practice

The COCOON seat shall not be used by disoriented people. In case of dependent

users, help and watchfulness from a third party are compulsory.

Weight limits

This lifter seat shall not be used by people weighing more than 160 kg / 352 lbs

(COCOON 1 or 2 motors) and 220 kg / 485 lbs (COCOON XXL).

2 –ASSEMBLY

Take the chair out of its box.

Put the backrest on the base before placing the armrests.

Tilt the seat’s mechanism rearwards using the remote control.

Raise the seat cover to have a good view of the brackets.

You can reach 2 possible seat depths: 45 cm (17 in) or 55 cm (21 in).

To reach the 55 cm seat depth, place the backrest’s female bracket (A) (picture 1) in front of the

base’s male bracket (C). Insert the bracket (C) in the bracket (A) until it clicks into place.

To reach the 45 cm seat depth, place the backrest’s female bracket (B) (picture 2) in front of the

base’s male bracket (C). Insert the bracket (C) in the bracket (B) until it clicks into place.

You can now put the armrests in place.

Insert the metal rod of your armrest in the hole provided in the seat’s armrest board. Repeat the

operation for the other side.

You can change your seat’s depth whenever you want. To do so, pull the female bracket tab (picture

2 bis) to the outward for both sides of the backrest and lift the backrest at the same time. Put back

the backrest in place at the wanted depth.

▪

Plug the actuator’s electric cable to the transformer.

▪

Plug the power cord to the other side of the transformer.

(B)

Depth 45 cm

Picture 2 bis

(A)

(C)

(B)

(C)

(A)

Picture 2

▪

Check that all the power connexions are in the right place.

▪

Plug the power cord to the mains, ensuring that it is compliant to the electrical

standards in force and to a 220V power voltage.

If you want to remove the backrest, tilt the chair’s mechanism to the rearward, then slightly

pull the bracket tab to the outward.

Any improper handling shall lead to a breach of warranty.

Noise and friction of the chair

Your chair may make some noise when changing position (tilt up and down and moving to

the lift position) due to the friction of the fabrics.

This is completely normal. The comfort and life span of your chair are fully preserved.

Assembly of the magazine rack

▪

Open the armrest as shown on picture 3.

▪

Insert the magazine rack in the armrest board and ensure it does not impair the

armrest board of the armrest (picture 3 bis).

Assembly of the tray:

▪

Place the COCOON chair in the lift position (picture 4)

▪

Insert the metal support of the tray in the provided opening (

picture 5)

▪

Put the tray on the support.

▪

If you want to change the lateral tray, take out the black plug obstructing the opening and put the

tray support in place.

Picture 3

Put your magazine rack in the

middle of the armrest board so

as not to close the notch on

the front of the armrest board.

Picture 5

Picture 4

Opening for tray support

installation.

Picture 3 bis

Using the remote control

▪

Secure and reversible remote control

▪

The remote control is prevented from falling by being placed under the armrest

cover.

COCOON chair single motor and XXL (picture 6)

2 buttons remote control

The 2 buttons remote control

allows you to manage the tilt angle by

yourself.

Green button

: the chair tilts rearward and the leg rest rises.

White button

: The chair comes back to the sitting position, the leg rest

lowers, and chair moves to lift position.

VERY IMPORTANT

When plugging the chair to the mains, DO NOT PRESS any button of the remote

control.

COCOON chair 2 motors (picture 7)

Four buttons remote control

Green button:

The backrest tilts rearward.

White button:

The backrest comes back to its straight position.

Blue button:

The leg rest rises while the chair comes back to sitting position.

Yellow button:

The leg rest lowers, and the chair moves to lift position.

Always check nothing can be stuck or hidden under the mechanism before any use.

The chair’s mechanism can cause serious injuries. Pay careful attention with young children and pets.

Picture 6

Picture 7

Composition of the COCOON chair

Your COCOON chair is made up as follows.

1 –A backrest

2 –A removable/washable backrest quilt

3 –A seat base

4 –A removable/washable seat base/leg rest quilt

5 –A leg rest

6 –Two retractable/removable armrests

7 –Seat reducer comfort cushion for

generation Cocoon chair

8 –Two armrest boards

9 –A remote control

Accessories:

Optional accessories are available, as follows.

L/R reversible tray (picture 8)

L/R reversible magazine rack (picture 8 bis)

Battery kit (picture 9)

Hoist friendly kit (picture 10)

Mobility kit (picture 11) fitted with a flange + 1 transport stick.

Head protection (picture 12)

Picture 8

Picture 8 bis

Picture 10

Picture 11

Transport

stick

Picture 9

Picture 12

Changing the quilt modules

to be washed or replaced

Backseat quilt:

-Remove the Velcro strap from the cover flap behind the backrest

-Zip down the left and right sides of the quilt

Seat base/leg rest quilt:

Remove the Velcro straps at the bottom, as well as on the right and the left of the seat

base.

All modules can be machine-washed at 30°C.

We advise you to put the quilts in a washing net or in a pillowcase to keep their original

aspect.

TECHNICAL SPECIFICATIONS

Maximum user weight

160 kg / 352 lbs (1 and 2 motors) /

220 kg /485 lbs (XXL version)

Coatings

Fire protection standards 1021-1 and 1021-2 compliant:

PVC/PU: Chocolate, Taupe grey, Licorice, Pistachio, Raspberry

Test reports nb 367160734 and nb 367160735

Polyester (velvet): Brown & Raw

Test reports nb 18.0433.01 and nb 18.02686.01

Mottled fabric: Brown & Grey

Test report nb 18.03363.01

Quilt padding

Silicone hollow fibre

CLEANING PROTOCOL FOR

COCOON COATINGS

➢All detergent, solvent and stain remover not listed in the French standard for institutions

furniture ARE STRICTLY FORBIDDEN.

➢Ball-point pens ink spots require immediate cleaning to prevent ink migration into the coated

fabric, which makes them indelible.

WARRANTY CERTIFICATE

Name:

First name:

Address:

ZIP code:

City:

Date of purchase:

Serial number:

For the warranty to be valid, the date of purchase must be clearly indicated.

Please take care of the environment. This product and its package can be sorted for

recycling. At the end of their lifespan, throw this product and its package in an authorized

collecting area so they can be recycled. This waste recovery will allow environment

protection.

For us to continually improve our services quality, we pay attention to any comments you

may have concerned quality, operation, or use of our products.

NOTES

Warranty conditions

Mechanism and motor: 5 years

Chair: 2 years

The chair warranty concerns any structural defect resulting from a material or manufacturing fault for

2 years, from the delivery date.

The purchase date must be written in the certificate attached to this guide.

Through this warranty, we only offer free refurbishing or exchange of the defected parts, after

INNOV’SA agreement. We want to make it clear that this refurbishing or exchange can only be done

with new parts, new subsets, or standard exchange of said parts only after evaluation by INNOV’SA.

We disclaim all liability for the damage caused by inappropriate uncompliant assembly and/or repair,

by neglect and fatigue, as well as by the modification of components or elements by the user or by

a third party. In these cases, the manufacturer’s liability can’t be engaged.

This warranty does not concern normal wear and tear of the paddings, wheels, (silicone) tubes, etc.

The damage caused by the use of force, or a non-compliant use are not insured. The damage

caused by users of more than the maximum authorized weight for each chair model are excluded

from the warranty. This warranty is valid only if the maintenance instructions are strictly respected.

Compliance

INNOV’SA chairs are manufactured according to the below mentioned directives, including the last

editions and the national law organizing these directives:

Low voltage equipment 2014/35/UE

Electromagnetic compliance (EMC) 2014/30/UE

Restriction of the use of hazardous substances (RoHS) in electrical and electronic equipment

Directive 2011/65/EU

INNOV’SA chairs are compliant to the following electrical standards:

▪EN 60335-1/A11:2014

▪EN 55014-1/A2 :2011

▪EN 55014-2/A2 :2008

▪EN 61000-3-2 :2014

▪EN 61000-3-3 :2013

▪EN 62233:2008

▪EN 50581 :2012

Give a new life to your furniture. When you want to get rid of it, if your chair is in a good shape, you

can give it to a structure specialized in social and solidarity economy. You can also put it in a drop-

off centre or give it back when buying a new one.

For more information about our COCOON chair, please visit our web site at www.innov-sa.fr

Scannez-moi

Altri manuali per COCOON

Indice

Manuali Massaggiatore popolari di altre marche

ELEEELS

ELEEELS P2 Manuale utente

Cenocco

Cenocco CC-9111 Manuale utente

Panasonic

Panasonic EP790-C1 Manuale utente

Human Touch

Human Touch NOVO Manuale utente

Adler

Adler AD 2167 Manuale utente

Taurus

Taurus Wellness TW-MC-M Manuale utente

Infinity

Infinity Syner-D Circadian Manuale utente

Hydas

Hydas LH-095 Manuale utente

AEG

AEG FM 5567 Manuale utente

OBH Nordica

OBH Nordica Shiatus Tunes Manuale utente

Hutech

Hutech Q9 Manuale utente

Medisana

Medisana MM 825 Manuale utente

SOLAC

SOLAC Therma Hydro Manuale utente

Invacare

Invacare Texas Manuale utente

Casada

Casada Bismarck II Manuale utente

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Manuale utente

Medisana

Medisana HM 886 Manuale utente

HoMedics

HoMedics BA-C200 Manuale utente