innove duralam INTEGRA Manuale utente
OPERATING INSTRUCTIONS
3
TABLE OF CONTENTS
INTRODUCTION ............................................................. 5
SAFETY INFORMATION ....................................................... 7
WARRANTY ................................................................ 9
ELECTRICAL SCHEMATICS ................................................... 10
SPECIFICATIONS ........................................................... 11
INSTALLATION ............................................................. 13
CONTROLS AND FEATURES
Main ON / OFF ........................................................... 14
Control Panel ............................................................ 14
Feeding Table (including feed guide–feed table Interlock) .......................... 15
Safety Shield (including Interlock) ............................................ 15
Film Mandrel ............................................................ 15
Film Tension Control .......................................................15
Heat Rollers ............................................................. 16
Pull Rollers .............................................................. 16
Rear Slitter .............................................................. 16
Circuit Breaker ........................................................... 16
OPERATING
Film Loading.......................................................... 17-23
Heat Setting ............................................................. 24
Speed Setting ........................................................... 24
Tension Control .......................................................... 24
MAINTENANCE
Cleaning Rollers .......................................................... 25
Cleaning Body Cover ........................................................25
Clearing a Film Jam (wrap–up) ............................................ 26-28
TROUBLESHOOTING GUIDE .................................................. 31
4
5
Thank you for your purchase of the Duralam Integra Laminator. The Duralam Integra features advanced
quartz heating technology and powerful DC motor drive for long term durability. Simple design with
eective safety controls ensure customer satisfaction! We look forward to many years of quality
laminating.
INTRODUCTION
6
7
SAFETY INFORMATION
Your safety as well as the safety of others is important. In this Instruction manual and on the product,
you will nd important safety messages regarding the product. Read these messages carefully. Read all
of the instructions and save these instructions for later use.
The safety alert symbol precedes each safety message in this instruction manual. The symbol indicates
a potential personal safety hazard to you or others, as well as product or property damage.
THE FOLLOWING WARNINGS ARE FOUND UPON THIS PRODUCT:
This safety message means that you could
be burned and your ngers and hands could
be trapped and crushed in the hot rollers.
Clothing, jewelry and long hair could be caught
in the rollers and pull you into them.
This message means you use caution when
near pull rollers. Pull rollers can grip and pull in
ngers, loose clothing, jewelry etc.
This safety message means that you could
get a severe burn if you come in contact with
the rollers. Use common sense and keep your
distance!
This message means you could cut yourself
if you are not careful.
WARNING: the safety alert symbol
precedes each safety message in this
instruction manual.
The symbol indicates a potential personal
safety hazard to you or others, as well as
product or property damage.
WARNING: do not attempt to service the or
repair the Duralam Integra laminator.
WARNING: do not connect the Duralam Integra
laminator to an electrical supply or attempt to
operate the laminator until you have completely
read these instructions.
Maintain these instructions with the Duralam
Integra at all times for operator reference.
CRUSH OR BURN HAZARD WARNING USE CAUTION
HOT SURFACE
SHARP BLADE
8
9
WARRANTY
SEE YOUR INNOVɮLOCATION OF PURCHASE TO CONFIRM COMPLETE WARRANTY TERMS
AND CONDITIONS. TERMS BELOW MAY VARY SLIGHTLY WITHIN EACH INNOVɮLOCATION.
Innové®Global Solutions warrants the Duralam Integra to be free from defects in material and
workmanship for a period of 1 year for parts from date of installation. This warranty is the only warranty
made by Innové® and cannot be modied or amended. Labour is covered by the installing dealer for
a period of 1 year from date of installation unless agreed to dierent terms at time of purchase. These
agreed terms must be clearly marked on the invoice and are between the installing dealer and customer.
Innove®Global Solutions sole and exclusive liability and the customer’s sole and exclusive remedy under
this warranty shall be, at Innové®Global Solutions option, to repair or replace any such defective part
or product. These remedies are only available if Innové®Global Solutions examination of the product
discloses to Innové®Global Solutions satisfaction that such defects actually exist and were not caused
by misuse, neglect, attempt to repair, unauthorized alteration or modication, incorrect line voltage, re,
accident, ood or other hazard.
Limited Warranty:
This warranty specically does not cover damage to the laminating rollers caused by knives, razor
blades, other sharp objects, failure caused by adhesives or improper use of the machine. Warranty
repair or replacement does not extend the warranty beyond the initial 90 day period from the date of
installation.
WARNING - Unauthorized customer alterations will void this warranty.
The warranty made herein is in lieu of all other warranties, expressed or implied, including any warranty
of merchantability or tness for a particular purpose. Innové®Global Solutions will not be liable for
property damage or personal injury (unless primarily caused by its negligence), loss of prot or other
incidental or consequential damages arising out of the use or inability to use the equipment.
Exclusions to the Warranty:
This warranty specically does not cover:
1. Damage to the laminating rollers caused by knives, razor blades, other sharp objects or failure caused
by adhesives.
2. Damage to the machine caused by lifting, tilting and/or any attempt to position the machine other
than rolling on the installed castors on even surfaces.
3. Improper use of the machine.
4. Damage due from unqualied person(s) servicing the machine. QUALIFIED: Any person(s) trained by
Innové®Global Solutions to perform service related work on such equipment.
10
ELECTRICAL SCHEMATICS
Electrical Schematics (120 Volt)
Indice
