InoTec SCAMAX H12 Manuale utente

User Manual

SCAMAX® Document Scanner

Type: H12

Version 1.2

InoTec GmbH .Biedrichstrasse 11 .61200 Woelfersheim

Tel.: +49 (0) 6036 9708-0 .Fax: +49 (0) 6036 9708-15

eMail: info@inotec.eu .http://www.inotec.eu

Table of Contents User Manual H12 / SCAMAX® 8x1 - Version 1.2

Seite 2 von 94

Table of Contents

1. Introduction...........................................................9

1.1. Safety instructions ..................................................9

1.2. Specic Danger Spots................................................9

1.2.1. Unmarked Danger Spots ......................................9

1.2.1.1. Covers ..............................................9

1.2.1.2. Dust Exposure ......................................10

1.2.1.3. Dual Input Hopper ...................................10

1.2.1.4. Input tray...........................................10

1.2.2. Marked Danger Spots .......................................10

1.2.2.1. General Danger Spot .................................10

1.2.2.2. Danger Spot Seize/Entangle...........................11

1.2.2.3. Danger Spot Crush/Jam 1 .............................11

1.2.2.4. Danger Spot Crush/Jam 2 .............................12

1.2.2.5. Danger Spot Crush/Jam 3 .............................12

1.2.2.6. Danger Spot Electrical Voltage.........................12

2. General description ..................................................13

2.1. SCAMAX® upgrade concept 801/811/821 ..............................14

2.2. Extensions/options .................................................14

2.2.1. Dual Input Hopper ..........................................14

2.2.2. HighSpeed Stacker Arm......................................14

2.2.3. 2nd Output Hopper .........................................14

2.2.4. Internal memory ............................................14

2.2.5. Straight Through Paper Path Elevation .........................14

2.3. Device Views ......................................................15

2.3.1. Front Views ................................................15

2.3.1.1. Basic Model .........................................15

2.3.1.2. Expansion Stage (Dual Input Hopper / 2nd Output Hopper)......16

2.3.2. Rear View ..................................................16

2.3.3. Interior Scan Plane ..........................................17

2.3.4. View Imprinter .............................................17

3. Startup Operation ....................................................18

3.1. Scope of Delivery ..................................................18

3.2. Setting Up the Device...............................................19

Table of Contents User Manual H12 / SCAMAX® 8x1 - Version 1.2

Seite 3 von 94

3.3. Connecting the Device ..............................................19

3.3.1. Power Supply / Main Switch ..................................19

3.3.2. Network Connection for Batch Transfer ........................20

3.3.3. USB3 Port for Scan Jobs......................................20

3.3.4. USB Ports for Input Devices or Data Storage ....................20

3.3.5. Connecting an Internal Data Storage ..........................20

3.3.6. Connecting the External Image Display (optional) ...............20

3.4. Installation of Drivers ...............................................21

3.4.1. USB Device Driver...........................................21

3.4.2. TWAIN™ Driver .............................................21

3.5. Switching the Device On and O / Initialization After Start ...............21

4. Capacitive Touchscreen...............................................22

4.1. Division of the Display Surface .......................................22

4.1.1. Status .....................................................22

4.1.2. Users......................................................22

4.1.3. Help ......................................................23

4.1.4. Info .......................................................23

4.1.5. Navigation Bar .............................................23

4.1.6. Display Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.1.7. Tool Bar ...................................................23

4.2. Operation Methods.................................................24

4.3. Scan Processing....................................................25

4.3.1. Division of Scan Screen ......................................25

4.3.1.1. Stream Information ..................................25

4.3.1.2. Document Information ...............................25

4.3.1.3. Counter Information .................................26

4.3.1.4. Button Bar ..........................................26

4.3.1.4.1. Modifying Quick-Access Buttons ..............26

4.3.2. Job and Prole Selection .....................................27

4.3.3. Working with the Internal Scan Solution .......................27

4.4. Job Management ..................................................28

4.4.1. General....................................................29

4.4.2. Prole Settings .............................................29

4.4.3. Counters...................................................29

4.4.4. Index File ..................................................30

Table of Contents User Manual H12 / SCAMAX® 8x1 - Version 1.2

Seite 4 von 94

4.5. Prole Management ................................................31

4.5.1. Image .....................................................32

4.5.1.1. Image Presettings ...................................32

4.5.1.1.1. Gamma Correction ..........................32

4.5.1.1.2. Brightness / Contrast ........................33

4.5.1.1.3. Enable Moiré Filter ..........................33

4.5.1.1.4. White Background ..........................33

4.5.1.1.5. Add/Remove Borders ........................33

4.5.1.1.6. Resize Image ...............................34

4.5.1.2. Filter Presettings ....................................34

4.5.1.3. Resolution ..........................................34

4.5.1.4. Streams Front/Back ..................................35

4.5.1.4.1. Color Settings ..............................35

4.5.1.4.2. Gray Settings ...............................36

4.5.1.4.3. Bitonal Settings ............................36

4.5.1.4.4. Stream Control .............................40

4.5.1.4.5. Blank Page Detection........................40

4.5.2. Input/Output...............................................42

4.5.2.1. Paper ..............................................42

4.5.2.1.1. Format Selection............................42

4.5.2.1.2. Feeder Mode ...............................43

4.5.2.1.3. Separation .................................43

4.5.2.1.4. Feeder Capacity ............................43

4.5.2.1.5. Change Output Tray at.......................43

4.5.2.1.6. Rear Output Tray at..........................43

4.5.2.1.7. Camera Threshold...........................44

4.5.2.1.8. Thickness ..................................44

4.5.2.2. Orientation .........................................44

4.5.2.2.1. Paper Input Orientation......................44

4.5.2.2.2. Output Image Orientation....................44

4.5.2.2.3. Textoriented ...............................45

4.5.2.2.4. Dierent Back Orientation ...................45

4.5.2.2.5. Dierent Back Textorientation ................45

4.5.2.3. Deskew ............................................45

4.5.2.3.1. Edge Threshold .............................45

4.5.2.3.2. Deskew Fill Color............................46

4.5.2.3.3. Detection only on back ......................46

4.5.2.3.4. Expert Settings .............................46

4.5.3. Scanner ...................................................46

4.5.3.1. Double Feed Detection ...............................47

4.5.3.1.1. Reaction at Detection........................47

4.5.3.1.2. Continue after Delete........................47

4.5.3.1.3. Activate/Deactivate Events ...................47

Table of Contents User Manual H12 / SCAMAX® 8x1 - Version 1.2

Seite 5 von 94

4.5.3.2. DF Sensor Conguration..............................48

4.5.3.3. Control Settings .....................................48

4.5.3.3.1. Scan Speed ................................48

4.5.3.3.2. QuickAccess 1-4 ............................49

4.5.3.3.3. Working Height.............................49

4.5.3.3.4. Input Hopper Down at .......................50

4.5.3.3.5. Scan Pause Event ...........................50

4.5.3.3.6. Optimized Gap .............................50

4.5.3.3.7. Additional Feeding Gap......................50

4.5.3.3.8. Manual Feed Lag............................50

4.5.3.4. Patch Decoder Settings ...............................51

4.5.3.4.1. Delete Patch Code Sheets ....................51

4.5.4. Counters...................................................52

4.5.4.1. Counter Settings ....................................52

4.5.4.1.1. Counter Value ..............................52

4.5.4.1.2. Transferred as ID ............................52

4.5.4.1.3. Counter Increment ..........................53

4.5.4.1.4. Counter Reset ..............................53

4.5.4.1.5. Trigger Value ...............................53

4.5.5. Annotations................................................53

4.5.5.1. PreScan/Post Scan Print ..............................53

4.5.5.1.1. Druckfunktion aktivieren/deaktivieren.........54

4.5.5.1.2. Print Text ..................................54

4.5.5.1.3. Print Margin................................55

4.5.5.2. Bates Stamp ........................................55

4.5.6. Interfacing .................................................56

4.5.7. Event Settings ..............................................56

4.6. User Management..................................................56

5. Scanning Documents.................................................57

5.1. Operation of the Input System .......................................57

5.2. Preparation of Documents...........................................57

5.3. Input Hopper ......................................................58

5.3.1. Settings ...................................................58

5.3.2. Using the Single Input Hopper ................................59

5.3.3. Using the Dual Input Hopper .................................59

5.4. Start / Stop of the Scanner...........................................60

5.4.1. Start / Pause the Scan Process ................................60

5.4.2. Quick-Stop of the Scanner....................................60

Table of Contents User Manual H12 / SCAMAX® 8x1 - Version 1.2

Seite 6 von 94

5.5. Scan Plane ........................................................61

5.5.1. Scan Background ...........................................61

5.5.2. Paper Passage Setting........................................61

5.6. Output Hopper ....................................................62

5.6.1. Setting Possibilities .........................................62

5.6.2. HighSpeed Stacker Arm......................................63

5.6.3. HighSpeed / Restrained Output Mode .........................65

5.6.4. Use of One Output Hopper ...................................65

5.6.5. Use of Two Output Hoppers ..................................66

5.6.6. Using the Rear Output Tray ...................................66

5.6.6.1. Straight Through Paper Path ..........................66

6. Opening the Scanner ................................................67

6.1. Opening/Closing the Scan Plane .....................................67

6.2. Opening/Closing the Output Hopper(s) ...............................68

6.2.1. ... with One Output Hopper...................................68

6.2.2. ... with Two Output Hoppers ..................................68

6.3. Removing/Attaching the Cover Output Hopper.........................69

6.4. Opening/Closing the Intermediate Drive Unit ..........................69

6.5. Removing/Attaching the Base Cover ..................................70

6.6. Removing/Inserting the Rear Output Pressure Unit .....................70

7. Cleaning and Maintenance ...........................................71

7.1. Cleaning Accessory .................................................71

7.2. Cleaning/Maintenance of the Paper Input .............................72

7.2.1. Cleaning the Feeder Roller Friction Linings-.....................72

7.2.2. Replacing the Feeder Roller Friction Linings ....................73

7.2.3. Cleaning the Separation Roller Friction Linings..................74

7.2.4. Replacing the Separation Roller Friction Linings .................74

7.3. Cleaning/Maintenance of the Scan Plane ..............................74

7.3.1. Cleaning the Ultra Sonic Sensors ..............................75

7.3.2. Cleaning the Scan Areas .....................................75

7.3.3. Vacuum Cleaning Below the Scan Plane ........................75

Table of Contents User Manual H12 / SCAMAX® 8x1 - Version 1.2

Seite 7 von 94

8. Imprinter .............................................................76

8.1. Front Side Print Before Scanning (Pre-Imprinter)........................76

8.2. Back Side Print After Scanning (Post-Imprinter).........................76

8.3. Ink Cartridge of the Imprinter ........................................76

8.3.1. Installation/Change of an Ink Cartridge ........................77

8.3.2. Capacity of the Ink Cartridges ................................77

8.4. Choice of Print Position .............................................78

9. Disruptions...........................................................79

9.1. Warning Messages .................................................79

9.1.1. Scanner Open (Warning 100) ...................................79

9.1.2. (2nd) Output Hopper Open (Warning 101/102) ....................80

9.1.3. Roller Assembly Incorrectly Installed (Warning 103)................80

9.1.4. Upper/Lower HS Stacker Arm in Wrong Position (Warning 104/105) ...80

9.1.5. Cartridge Pre/Post-Imprinter Undetected (Warning 106/107) ........80

9.1.6. Calibration in Progress (Warning 108) ............................80

9.1.7. (2nd) Output Tray Full (Warning 109/110) .........................81

9.1.8. Base Cover Opened (Warning 111). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

9.1.9. Cover (2nd) Output Hopper Opened (Warning 112/113).............81

9.1.10. Changing Straight Through Paper Path (Warning 114)..............81

9.1.11. ............... in Secured State (Warning 115 - 123) ......................81

9.1.12. Update (Warning 124) .........................................82

9.1.13. Test Scan Mode is active (Warning 125) ..........................82

9.1.14. Rear Output Active (Warning 127) ...............................82

9.2. Error Messages ....................................................83

9.2.1. Scanner Opened While Scanning (Error 200)......................83

9.2.2. (2nd) Output Hopper Open (Error 201/202) .......................83

9.2.3. Roller Assembly Incorrectly Installed (Error 203) ..................83

9.2.4. Upper/Lower HS Stacker Arm in Wrong Position (Error 204/205) .....84

9.2.5. Cartridge Pre/Post-Imprinter Undetected (Error 206/207) ...........84

9.2.6. (2nd) Output Tray Full (Error 208/209) ............................84

9.2.7. Paper Jam at Paper Input (Error 210) ............................84

9.2.8. Paper Jam at Scan Area (Error 211/237/238/239/240).................85

9.2.9. Paper Jam at Rear Output (Error 212) ............................85

9.2.10. Paper Jam at Lower Transport Path (Error 213/214).................85

9.2.11. Paper Jam Before (2nd) Paper Output (Error 215/216) ..............85

Table of Contents User Manual H12 / SCAMAX® 8x1 - Version 1.2

Seite 8 von 94

9.2.12. Paper Jam Inside (2nd) Output Tray (Error 217/218) ................85

9.2.13. Paper Jam Inside (2nd) Output Tray (Error 219/220) ................86

9.2.14. Double Feed Detected (Error 221)...............................86

9.2.15. Button Quick-Stop Pressed (Error 222) ...........................86

9.2.16. Switch Input Hopper Failed (Error 223) ..........................86

9.2.17. Calibration Failed (Error 224) ...................................86

9.2.18. Paper Inside Paper Input (Error 225) .............................87

9.2.19. Paper Inside Scan Area (Error 226) ..............................87

9.2.20. Paper Inside Rear Output Area (Error 227) ........................87

9.2.21. Paper Inside Upper/Lower Transport Path (Error 228/230) ...........87

9.2.22. Paper Inside (2nd) Output Area (Error 229/231)....................88

9.2.23. Input Tray(s) Not Installed Properly (Error 232) ....................88

9.2.24. Base Cover Opened (Error 233) .................................88

9.2.25. Cover Output Hopper (Top) Opened (Error 234/235) ...............88

9.2.26. Firmware Update Failed (Error 236) .............................88

9.2.27. Stepper Driver Overheated (Error 241)...........................89

9.2.28. Patch Detection Inconsistency (Error 242) ........................89

9.2.29. Error while Opening/Closing the Scan Plane (Error 243) ............89

9.2.30. Scanner Hardware is Overheating (Error 244) .....................89

9.2.31. Scanner Hardware is Overheated (Error 245) .....................89

9.3. Internal Warning/Error Messages > 800................................90

9.4. Hardware Error Messages > 900 ......................................90

9.5. Image Disruptions..................................................91

9.5.1. Poor Image Quality..........................................91

9.5.2. Lines in the image...........................................91

10. Attachments .........................................................92

10.1. Technical Specication..............................................92

10.2. Scan Speeds 801 / 811 / 821 - A4/Letter................................94

10.3. Contact Information ................................................94

Introduction User Manual H12 / SCAMAX® 8x1 - Version 1.2

Page 9 of 94

1. Introduction

This manual contains information about the correct handling of SCAMAX® document scanners, type

H12 . This type includes the models 801, 811 and 821.

Additional models and special editions with a dierent conguration are possible.

All models are identical in design. If a specic model is not explicitly mentioned in this manual, the

description covers all models alike. In order to exclude operating errors, before you start working with

the SCAMAX® scanner, the pertinent safety precautions in this manual are to be observed.

This manual only describes the operation of SCAMAX® H12 type scanners and the integrated software

interface. The operation of external scanning software and the scanning computers used with them

from other manufacturers can be found in the respective manuals.

1.1. Safety instructions

The unit may only be connected to a grounded outlet.

Removing of housings using tools is only permitted for trained technicians and authorized experts.

Under normal conditions the removing of housings isn’t necessary.

Risk due to moving parts! Keep ngers and other body parts away.

1.2. Specic Danger Spots

While running, moving or opening and closing the unit, specic danger spots can arise which are

partially marked with warning decals and described in the following chapters. All gures are based

on a unit with full expansion (Dual Input Hopper and 2nd Output Hopper), as certain danger spots are

only existing with those modules.

1.2.1. Unmarked Danger Spots

1.2.1.1. Covers

The scanner may only be operated with closed covers (Kapitel 6.3./6.5.). Magnetic switches at all rel-

evant positions prevent from operation with opened covers. When reaching into the covered area, a

small risk of pinching and grazing remains, due to exposed parts of the transport mechanism.

WARNING

All paragraphs with WARNING indicate that injury to the operator may be possible in case of

non compliance.

CAUTION

All paragraphs with CAUTION point out that non-observance can cause damage to the device

under certain circumstances.

WARNING

As an non-observance of the subsequent described danger spots can result in substantial

injuries, unconditional attention should be paid to all related notes and handling instructions.

Introduction User Manual H12 / SCAMAX® 8x1 - Version 1.2

Page 10 of 94

1.2.1.2. Dust Exposure

Dependent on age, condition and the previous storage of the scan documents the dust exposure can

increase in the immediate vicinity of the scanner. If symptoms like tussive or mucosal irritations sud-

denly occur in coherence to such a material, an adequate ventilation should be ensured. In extreme

cases a suitable inhalation protection must be used.

1.2.1.3. Dual Input Hopper

The Dual Input Hopper isn’t blocked anymore and can be moved manually if the scanner is powered

o. Because of that, the Dual Input Hopper must be dismounted or protected against unwanted shift-

ing by appropriate means while moving or transporting the unit.

While running the scanner with a Dual Input Hopper the lateral movement range may not be blocked.

Non-observance can result in crush or jam injuries.

During the lateral movement of the Dual Input Hopper in case of a refer-

ence move or an Input Tray switching, its center bridge moving along the

housing edges. The distance between the center bridge and the edges is

big enough to prevent jams. Nevertheless, a small risk remains at this point.

1.2.1.4. Input tray

Inside the Input Tray of the Paper Input laterally slotted holes are existing

where the plate of the Input Tray is guided. The slight width of the slotted

holes prevent jams. Nevertheless, a small risk remains at this point.

1.2.2. Marked Danger Spots

Areas with increased risk potential are identied with the following warning icons directly bonded

to the unit.

1.2.2.1. General Danger Spot

This warning icon indicates a general or not specied danger spot which can contain

dierent possible causes of risk.

In the present case the warning

icons are placed behind the Gaiters

of the present Output Hoppers and

should indicate that the scanner

may not be driven with an open

Gaiter, as rotating parts or crushing

zones are unprotected and result in

a higher risk of injuries.

Altri manuali per SCAMAX H12

Indice

Altri manuali InoTec Scanner

InoTec

InoTec SCAMAX 2600 Manuale utente

InoTec

InoTec SCAMAX H12 Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente