MAX OWNER’S MANUAL 6
1. Plug the USB cord that is ran through the back of the laptop drawer into the laptop.
2. Open NovaLCT
3. Click the “User(U)” dropdown tab and click “Advanced User Login (A)”
4. Use password admin and click “login”.
5. Click screen configuration.
6. Be sure that the current operation is the USB port that is plugged in, and the “Configure Screen” box is
checked. If so, click “Next.”
7. Click the “Receiving Card” tab
8. Click “Load from File”
9. Find the file labeled “Receiving Card” (It should be in the Max Tech Files folder on the desktop) and
click “Open”.
10. Click “Send to Receiving Cards”
11. Another window should pop up. In this window, be sure that “All Receiving Cards” box is check and
click “Send.”
12. This will properly configure all the receiving cards within each individual LED screen.
13. Click the “Screen Connection” tab
14. Click “Load from File”
15. Find the file labeled “Max Mapping” (It should be in the
Max Tech Files folder on the desktop) and click “Open”.
16. Click “Send to HW.” This will send the proper data configu-
ration to the LED screen.
USING VIPLEX SOFTWARE
ViPlex is a powerful media playing software built specifically for use with the screens mounted on MAX 1710.
This software allows the user to setup, program, and display a variety of media files and effects to the LED
screen. Please refer to ViPlex Manual on Desktop.
CONTROLLER (VX4S) OPERATING PROCEDURES
The VX4S is a professional LED display controller. Besides the function of display control, it also features
in powerful front-end processing, so an external scalar is no longer needed. With professional interfaces
integrated, VX4S with excellent image quality and flexible image control greatly meet the needs of the
broadcast industry, Its friendly in user-interface. so that the display to work has never been as easier and more
enjoyable as with VX4S.
BASIC SETUP
Follow the directions below for controller setup when using ViPlex software:
1. Press the HDMI button on the front panel of the controller so that it turns red.
2. Press the SCALE button on the front panel of the controller so it is disabled.
Change Brightness
1. Return to main menu interface.
2. Press the Knob to select the corresponding value of brightness.
3. Rotate the Knob to adjust value.
4. Press Knob again to send new brightness value to screen.
TIP: Please refer to the
NovaLCT User Manual for more
detailed setup instructions
and advanced display options
TIP: Brightness will
vary based on the
event being indoor
or outdoor as well
as cloud coverage
and time of day.
This may need to be
changed multiple
times depending on
duration of event.
