Q
QU
UI
IC
CK
K
R
RE
EF
FE
ER
RE
EN
NC
CE
E
G
GU
UI
ID
DE
E
5
Page Parameter Setup value Factory default value
Video Size
Set the resolution of the video transmitted
from NVC 910.
Max Upload Rate
Set this value smaller than the upload
speed of your network.
Frame Rate
The number of frames to be transmitted
per second.
Basic
Setup
Video Rate
Bandwidth assigned for video transmitted
from NVC 910.
Make sure that you press Check
button to find out the number of
maximum possible simultaneous users
then set the number of users smaller
than or equal to the number.
User
Admin &
Time
Setup
Administrator name
& password
For safety, you are recommended to
change these values from factory default.
For new connection, you need to input
changed values for corresponding fields.
Do not disclose these values to others and
memorize these values.
Default value
User name : root
Password : root
User
Admin &
Time
Setup
Current Time
Input correct time in this field.
Default value :
2001/1/1
5. Connect the input and output signals to NVC 910.
Connectors Function Signal description Number
Mic/LINE-In Audio/Voice in Connect microphone or output from audio
devices. 1
Line Out Audio out for
speaker
Audio from remote site is available from this
connector in bi-directional audio mode.
Connect speaker with amplifier.
1
Connecting Alarm
Sensor
IR sensor, Motion Sensor, Smoke
Detector… 1
Alarm
/Aux Connecting Alarm
annunciating
device
Siren, Flashing Light, … 1
Network Network connection
Connect NVC 910 to the network, LAN,
ADSL or Cable modem. 1
DC12V Supply DC power Apply DC12V power to network camera 1
