Care and Safety
» Electrical safety: installation and operations must be in compliance with local electrical safety codes. We are not
responsible for re or electrical shock caused by improper handling or installation.
» Transport safety: care must be taken to avoid damage caused by weight, violent vibrations, or splashing water during
shipping, storage, and installation.We are not responsible for any damage or problems arising from the use of integrated
packaging during transport.
» Installation: do not touch the camera lens in order not to affect the video quality.
» Need for qualied technicians: the entire installation process must be conducted by qualied technicians. We are not
responsible for any problems arising from unauthorized modications or repair attempts.
» Environment: the camera must be installed in a location protected from exposure to ammable, explosive or corrosive
substances.
» Camera Care: do not install the camera on unstable places. The camera may fall, possibly causing serious injury to a
child or adult. Use it only with the bracket recommended by the manufacturer. Do not aim the camera at the sun as this
may damage the CMOS. Do not install the camera in locations where the temperature exceeds the levels allowed in the
technical specications. Avoid exposing the camera to strong magnetic elds and electrical signals.
» Accessories care: always use the accessories recommended by the manufacturer. Before installation, open the
packaging and check that all components are included. Contact your local reseller immediately if you cannot nd a
component in the package.
» Save the packaging for future use: carefully save the Intelbras VIP camera packaging in case it needs to be sent to
your local reseller or to the manufacturer for maintenance services. Packaging other than the original may cause damage
to the device during transport.
» LGPD - General Personal Data Protection Law: this product has the option of encrypting data in transit and cannot
encrypt it while idle. Intelbras does not access, transfer, capture, or perform any other type of personal data processing
with this product, with the exception of data required to operate the services. For more information, see the chapter on
equipment security methods.
The use of this Product allows you to collect personal data from third parties, such as facial image, biometrics, vehicle
identier, email, phone. Therefore, in order to process such data you must comply with local legislation ensuring the
protection of the rights of the personal data subjects by implementing measures including, but not limited to: informing,
in a clear and visible way, the personal data subject about the existence of the surveillance area and providing contact
information for any questions and rights guarantees.
Attention:
» Use a dry cloth to clean the dome and/or the transparent camera lens protector. If any dirt is difcult to remove, use a
mild (neutral) detergent and wipe gently. Do not clean the dome and/or transparent lens protector with any other type
of product (e.g. alcohol), as this may stain the equipment, impairing image viewing;
» To ensure the recording of images, it is recommended to use the regular recording mode and not the motion detection mode;
» Avoid installing the camera in environments with frequent movement, for example, bushes and foliage, since they could
block the images of interest and could also consume storage (processing) unnecessarily;
» For use in critical scenarios, such as high security or law enforcement situations, use the regular recording mode. Do not
use motion detection recording for critical scenarios.
