Intelbras AMT 8000 LITE Manuale utente

User’s Manual

AMT 8000 LITE

English

AMT 8000 LITE

Alarm center

Congratulations, you have just purchased a product with Intelbras quality and safety.

The AMT 8000 LITE wireless alarm center features advanced technology and is easy to program. All 8000

series devices can be connected, exchanging encrypted information, for increased system security.This center

has an integrated siren and 16 partitions .The system has differentials such as a high-performance wireless

device communication (bidirectional) with a range of up to 600 meters without barriers and direct sight,

GPRS, GSM, and Ethernet type connections to provide easier monitoring reporting to 2 IPs (monitoring

companies) plus the Intelbras Cloud connection using initially the random remote access password indicated

along with the QR code label that also contains the MAC.

The AMT 8000 LITE center has remote software (rmware) updates, using Ethernet communication to down-

load the rmware version. In addition to this option, the center can also be updated using the BootLoader

resource. For this, it is necessary to have theAtualizador 8000 software previously installed on your computer.

ATTENTION: this product comes with a factory default password. For your security, it is essential that you

change it as soon as you install the product and ask your technician about the passwords set, which users

have access and the recovery methods.

Care and Safety

» Follow all instructions in the manual to install and handle the product.

» Install in environments not susceptible to factors such as rain, fog and water splashes.

» Wireless communication technology, when exposed to environments with high power radiation, may suffer interference

and and have its performance impaired. Example: locations near TV towers, AM/FM radio stations, amateur radio sta-

tions, etc.

» Do not install the alarm center and its accessories near radio frequency equipment such as routers, repeaters, and/or

Wi-Fi signal ampliers. The center and its devices must maintain a minimum distance of 2 meters from this equipment.

» Do not install the alarm center facing air conditioning equipment or heaters.

» Do not expose to direct sunlight.

» Clean only the outside of the device, using a damp cloth (do not use chemical solvents).

» Do not subject the device to excessive pressure or shock/drops.

» Check that at the installation site, the LED indicator of the devices ashes green when activated.

» Avoid installation on metallic surfaces so as not to weaken the transmission signal between the system’s devices.

» Installation and conguration of the center and of the other products that make up this system must be performed by

a qualied professional.

» Perform periodic tests on it, in order to validate weather conditions, battery level and other factors, so that the site

monitored by the system is always in proper operating conditions.

» LGPD - General Personal Data Protection Law: Intelbras does not access, transfer, collect or otherwise process any per-

sonal data from this product.

Summary

1. Technical Specications 6

2. AMT 8000 LITE Alarm Center Features 7

3. AMT 8000 LITE Accessories 7

3.1. GPRS XG 2G module and GSM XG 3G module.....................................................7

3.2. Wireless keyboard for alarm centers - XAT 8000 ....................................................8

3.3. Remote Control - XAC 8000 ..................................................................9

3.4. Wireless Siren - XSS 8000 ...................................................................10

3.5. Wireless Magnetic Sensor - XAS 8000 ..........................................................10

3.6. Wireless Passive Infrared Sensor - IVP 8000 Pet ...................................................11

3.7. Wireless Passive Infrared Sensor - IVP 8000 Pet Cam ...............................................12

3.8. Wireless Passive Infrared Sensor - IVP 8000 EX ....................................................13

3.9. Transmissor universal – TX 8000...............................................................14

3.10. RF Range Amplier (REP 8000 Repeater) .......................................................14

3.11. Wireless Actuator - PGM 8000 ...............................................................15

4. Installation of the center and its peripherals 16

4.1. Power supply for the alarm center (full range 90 and 265 Vac) ........................................18

4.2. Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

4.3. XG 2G/XG 3G Module ......................................................................19

4.4. AMT 8000 LITE Alarm Center .................................................................20

5. Operation 20

5.1. Description of the XAT 8000 LCD keypad instructions ...............................................20

5.2. Problems Display ..........................................................................20

5.3. Description of the LED signaling of the alarm center boards ..........................................20

5.4. Partition.................................................................................21

5.5. Activation/deactivation of the alarm center.......................................................22

5.6. Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

5.7. Remote Update ...........................................................................26

6. Programming 27

6.1. Programming mode .......................................................................27

6.2. Wireless devices (register/delete) ..............................................................29

6.3. Wireless sensor functions ....................................................................36

6.4. Remote control key functions .................................................................38

6.5. Wireless keyboard functions ..................................................................40

6.6. Siren functions............................................................................42

6.7. Update .................................................................................49

6.8. Passwords ...............................................................................49

6.9. Quick setup for monitoring...................................................................53

6.10. Zone settings ............................................................................56

6.11. Programming the center’s partitioning .........................................................60

6.12. Timings ................................................................................61

6.13. Alarm center time settings ..................................................................63

6.14. Timezone ..............................................................................65

6.15. Periodic test.............................................................................66

6.16. Autoactivation ...........................................................................66

6.17. Monitoring settings .......................................................................70

6.18. Activation/deactivation of functions ...........................................................84

6.19. Time to send AC failure ....................................................................87

6.20. System reset ............................................................................87

6.21. Quick programming reference ...............................................................88

6.22. Homologation ..........................................................................105

Warranty Terms 106

1. Technical Specications

Product Monitored alarm center

Integrated siren Audible power of 100 decibels at 1 (one) meter

AC power supply 90 to 265 V (cable gauge ≥1 mm recommended)

DC power supply 5.7 from the AMT 8000 LITE/PRO power supply

Battery Rechargeable 3.7 Vdc battery (included with the alarm center)

Operating Temperature -10 °C to 50 °C @ 90% humidity

Weight 568 grams (with battery)

Dimensions (W × H × D) Product: 84 × 290 × 273 mm

With individual packaging: 90 × 292 × 276 mm

Potência média¹

AMT 8000 LITE: 5.2 Watts

AMT 8000 LITE + XG: 8.1 Watts

Antenna type: Internal

Antenna Gain: 0 dBi

Wireless communication frequency

AMT 8000 LITE/Accessories 915 to 928 MHz via internal antenna, power 18 dBm

Modulation DSSS BPSK 40 Kbps

Battery Internal, 3.7 Vdc rechargeable lithium

Optional²

XAC 8000 Remote Control

REP 8000 RF Range Amplier

Wireless keyboard XAT 8000

XAS 8000 Wireless magnetic sensor

TX 8000 Universal transmitter

Wireless passive infrared sensor IVP 8000 EX

Wireless passive infrared sensor IVP 8000 Pet

Wireless passive infrared sensor IVP 8000 Pet Cam

GPRS XG 2G Module

GSM XG 3G Module

Wireless Siren XSS 8000

Wireless Actuator PGM 8000

Requirements: maximum power veried with the alarm center activated, with registered peripherals (keyboards/sensors/sirens), and with the

communication means connected and operating together with the center. In some operations, the consumption can vary according to the number of

peripherals operating in the security system and their information exchange (Stand by mode - continuous).

²Optional:

for more information see

www.intelbras.com.br

Attention: Intelbras wireless systems are tested to the highest standards and bring high reliability, however, due to the use/installa-

tion in varied scenarios, some considerations must be taken into account

» The transmitters/receivers may be disturbed by radio signals, natural interferences, the device’s operating location, wea-

ther conditions and other adversities that affect data transmission regardless of the frequency or technology used, since

the transmission medium is adverse and different from place to place.

» The devices’ receivers/transmitters have an internal processing time, and only receive the data needed for communication

between them after this particular time for the system.

» Wireless devices should be tested regularly to determine if there are sources of interference and to protect against

possible failures.

2. AMT 8000 LITE Alarm Center Features

» Capacity for 16 partitions with independent activation/deactivation.

» Zone allocation according to the desired partitions.

» Wireless signal receiver/transmitter integrated into the alarm center operating at a frequency of 915 to 928 MHz.

» Support 2 cellular chips (SIM card) with XG 2G or XG 3G module installed.

» GPRS quad-band modem: compatible with most national GSM operators for the AMT 8000 LITE operating with the XG 2G

and XG 3G module (sold separately).

» Event reporting by Ethernet connection, GPRS connection (with the XG 2G module installed - sold separately) and GSM

connection (with the XG 3G module installed - sold separately).

» Remote access of the alarm center via application.

» Used together with all wireless devices in the 8000 line.

» Capacity of visualization and programming of parameters by up to 16 XAT 8000 keyboards.

» Integrated wired siren plus 16 wireless sirens XSS 8000.

» Integrated wired siren plus 16 wireless sirens XSS 8000

» Remote programming via Ethernet, GPRS and GSM.

» Capacity for connecting up to 04 REP 8000 RF ampliers.

» Programming for up to 97 passwords including duress with congurable permissions.

» Monitorable by the Contact-ID protocol.

» Supervision of sensors, wireless sirens, keyboards, PGMs, and repeaters.

» Low battery detection of wireless devices.

» Internal buffer for 512 events.

» Remote software update through Ethernet connection.

3. AMT 8000 LITE Accessories

The AMT 8000 LITE alarm center can have several accessories grouped together to compose the monitoring and security

system. The accessories are responsible for communication and monitoring, the buzzer, the LCD keyboard, and several

sensors, for the best adequacy and composition of the necessary protection system.

3.1. GPRS XG 2G module and GSM XG 3G module

Optional dedicated accessory for data transmission via GPRS / GSM for communication, conguration and event reporting

between user and/or monitoring company with the AMT 8000 LITE security system.

Features

» Supports up to two SIM card type chips.

» GPRS communication in 2G with XG 2G module and 2G/3G communication with XG 3G module.

» External antenna with 0 dB gain.

» Reports events to 2 IP destinations (monitoring company) plus the Intelbras cloud.

» Connections to DNS destinations.

» Power supply from the AMT 8000 LITE alarm center.

The following picture shows an illustrative image of the XG 2G and XG 3G modules:

100

25V

GPRS XG 2G and GSM XG 3G Module

Note: XG 2G and XG 3G modules are compatible with most of the national GPRS / GSM operators with 2G and 3G

technology.

3.2. Wireless keyboard for alarm centers - XAT 8000

Optional dedicated accessory for conguring, checking status, and operating the AMT 8000 LITE alarm center. The commu-

nication between the keyboard and the alarm center is carried out via a wireless signal, providing a simpler installation and

with a longer communication range. Up to 16 XAT 8000 keyboards can be added to each alarm center.

Features

» 3-line monochrome character liquid crystal display:

» 1st line for graphic icons (alarm center battery charge indication, trouble indication, and activated siren).

» 2nd message line with 14 segments.

» 3rd message line with 14 segments.

» Keyboard with illuminated keys.

» Cover to protect against accidental actuation of the keys.

» Brightness sensor for activating the display and key illumination.

» Problem Viewing.

» Wireless communication with the alarm center (915 to 928 MHz) through an internal antenna, power 11 dBm.

» Simplies alarm center programming.

» Text message viewing.

» Center’s battery level display.

» Zone status display (open/closed).

» Partition status signaling.

» Panic, Medical emergency and Fire function.

» Tamper protection.

» Audible Signaling during operation.

» DC power supply: 4 batteries 3 Vdc (CR2450) included.

» Communication supervision and encrypted transmission.

» Range: up to 600 meters with direct line of sight in open eld.

The following gure shows an illustrative image of the keyboard:

1 2 3

4 5 6

7 8

Wireless Keyboard XAT 8000

The keyboard has a tamper switch, located on its front side, under the cover, and activated by moving the keyboard cover,

its function is to activate the keyboard. On the front of the XAT 8000 there is also a light guide for the brightness sensor,

whose function is to control the brightness intensity of the display and keyboard for battery optimization.

The keyboard installation can be done on several surfaces, always placing it in a vertical position in relation to the oor and

using double-sided tape or screws (not included) to x the base, and after attaching the device, tting and checking if it

was placed correctly to avoid falls and damages.

3.3. Remote Control - XAC 8000

Optional dedicated accessory for interface between user and alarm center. It allows activating,deactivating and performing

other functions together with the alarm center with three keys and luminous identication of the events. Up to 98 XAC

8000 controls can be added to each alarm center.

Features

» Visual indication of communication with the system through a bicolor LED.

» 3 programmable buttons.

» Wireless communication with the alarm center (915 to 928 MHz) through an internal antenna.

» Power 11 dBm.

» DC power supply: 1 long-life internal 3 Vdc battery (CR2032).

» Encrypted transmission.

» Range: up to 200 meters with direct line of sight in open eld.

The following gure shows an illustrative image of the control:

XAC 8000 Remote Control

3.4. Wireless Siren - XSS 8000

Optional dedicated accessory for audible status warning, intrusion and emergency indications from the AMT 8000 LITE

alarm center. Communication between the siren and the alarm center is done through a wireless signal, providing a

simpler installation with a long communication range. Up to 16 XSS 8000 sirens can be added to each AMT 8000 LITE

alarm center.

Features

» Sound power of 100 dB at 1 meter.

» Communication status checking via LED.

» Audible trigger if communication with the alarm center is lost.

» Wireless communication with the alarm center (915 to 928 MHz) through an internal antenna, power 11 dBm.

» DC Power supply: 1 non-rechargeable Li-SoCl2 3.6 V / 14 A battery with wire/connector - included.

» Communication supervision and encrypted transmission.

» Range: up to 600 meters with direct line of sight in open eld.

The following gure shows an illustrative image of the siren:

Wireless siren XSS 8000

The XSS 8000 has a tamper switch, located on the back of the siren, and if this key is opened/violated, registered sirens will trip

and send the corresponding event if the Triggering Problems is enabled (see section

Triggering Problems

The installation of the siren can be on various surfaces, always placing it in a vertical position with a height between 1.80

and 2.20 meters from the oor and using double-sided tape or screws (not included) to x the base and after attaching the

device, tting and checking for correct placement to avoid falls and damage.The communication status between the siren

and the alarm center will be represented by the LED indicator located on the front panel, and when in normal communi-

cation the LED will blink green, with partial communication it will blink orange and without communication, it will blink

red (the LED indicator after 15 minutes will go into hibernation mode for battery saving, not harming the communication

of the device and to activate it again press once the synchronization key of the device).

3.5. Wireless Magnetic Sensor - XAS 8000

Optional dedicated accessory for door and window opening verication with a differentiated, discreet and compact design.

With low battery indication and communication status in the sensor, supervision, activation and anti-tamper system with

internal tamper to compose the security system line 8000 with maximum results.

Features

» Wireless communication with the alarm center (915 to 928 MHz) through an internal antenna, power 11 dBm.

» Communication status check via LED.

» Fixing by screws (not included) or double-sided tape (not included).

» DC power supply: 1 x 3 Vdc long-life CR2450 lithium battery.

» Communication supervision and encrypted transmission.

» Range: up to 600 meters with direct line of sight in open eld.

Altri manuali per AMT 8000 LITE

Indice

Altri manuali Intelbras Sistema di sicurezza

Intelbras

Intelbras AMT 8000 Manuale utente

Intelbras

Intelbras AMT 1000 SMART Manuale utente

Intelbras

Intelbras XSS 8000 Manuale utente

Intelbras

Intelbras AMT 2018 E Manuale utente

Intelbras

Intelbras AMT 8000 Manuale utente

Intelbras

Intelbras AMT 4010 Smart Manuale utente

Intelbras

Intelbras 8000 Series Manuale utente

Intelbras

Intelbras AMT 8000 LITE Manuale operativo

Intelbras

Intelbras AMT 8000 Slim Manuale operativo

Intelbras

Intelbras AMT 8000 Manuale operativo

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente