Intelbras GF 1200 Manuale utente
User guide
GF 1200
GF 1200
Wi-Fi router 5 (dual band AC 1200)
Congratulations, you have just purchased a product with Intelbras quality and security.
The GF 1200 router is designed for ISPs that want to deliver much higher performance
Wi-Fi to their subscribers. With it you can share Internet access with multiple devices in a
high-speed wireless network. Its installation and management can be done through the
web interface, quickly and easily. In addition, it is compatible with the Remotize platform
(
https://remotize.intelbras.com.br
), which allows providers to manage their router park
with convenience and security in a centralized way.
Care and safety
Avoid an excessive number
of physical barriers be-
tween the transmitting and
receiving devices on the
Wi-Fi network.
Adjust the position of the
antennas. Usually, the
vertical position is the most
indicated.
Prefer to install your router in
the central part of the environ-
ment and preferably in a higher
location, for example on top of
a furniture.
Do not leave your router exposed to sunlight or heat sources.
Do not place the router in closed or tight places.
Do not leave your router near the microwave or other equipment that might generate
interference.
Do not leave your router near other radio frequency transmitters, for example,
wireless (analog) phones.
Use only products that are approved according to current legislation. This will
prevent, for example, such products from causing serious interference problems in
your network.
Summary
1. Technical specications 5
2. Accessories 6
3. Installation 7
4. Conguration 7
4.1. Conguration via web interface ................................................................7
4.2. Dashboard................................................................................8
4.3. Network settings ...........................................................................9
4.4. System settings ...........................................................................15
5. Frequently Asked Questions 18
Warranty term 19
5
1. Technical specications
Hardware
4 xed antennas of 5 dBi
3 LAN Fast Ethernet ports (10/100 Mbps each)
1 WAN Gigabit Ethernet port (10/100/1000 Mbps)
Chipset Realtek® RTL8197F + RTL8211F + RTL8812BRH
Flash Memory 8 MB
RAM memory 64 MB
OS Linux + Bifrost Intelbras
Button
Reset/WPS
(Attention: this button does not have the function
WPS
enabled)
Compatible with the Remotize platform (
https://remotize.intelbras.com.br
)
Wireless
parameters
IEEE standards 802.11a/b/g/n/ac
Radio mode Mu-MiMo, Beamforming
Mode of operation Router
Frequency of operation 2.4 GHz
5 GHz
Bandwidth 2.4 GHz: 20, 40 MHz with coexistence enabled by default
5 GHz: 20, 40, 80 MHz with coexistence enabled by default
Transmission rate 2.4 GHz: up to 300 Mbps
5 GHz: up to 867 Mbps
Channels of operation
2.4 GHz: 1-13 (Brazil)
5 GHz: 36, 40, 44, 48, 149, 153, 157, 161 (considering 20 MHz. When
changing the bandwidth, the system automatically adjusts the available
channels on the product interface)
Maximum power
(E.I.R.P.)
2.4 GHz: 316 mW (25 dBm)
5 GHz: 158 mW (22 dBm)
Receiver sensitivity at
2.4 GHz
Receiver sensitivity at
5 GHz
Security WPA-WPA2/PSK with AES encryption
6
Description of LEDs
Power On: power-connected router
Off: power-disconnected router
Internet
On: router with internet access
Flashing: Internet port connected, but no Internet access
Off: no network cable connected to the Internet port
LAN
On: there is(are) device(s) are connected on LAN ports
Flashing: there is(are) device(s) traveling data on LAN ports
Off: no device connected to the LAN ports
Wi-Fi
On: Wi-Fi on, no devices trafcking data
Flashing: Wi-Fi on and devices are trafcking data
Off: Wi-Fi off (5 GHz and 2.4 GHz)
Power supply
Input 100V-240 V to 50/60 Hz
Output 12 Vdc / 1 A
Maximum power
consumption 5.68 W
Attention: this equipment is not entitled to be protected against harmful interference and may not
cause interference to duly authorized systems.
2. Accessories
» Network cable;
» Power supply;
» Installation guide.
7
3. Installation
The following scenario describes the product installation for use in
Router
mode.
Step 1
Step 2
Step 3
Installation in
Router
mode
1. Connect the power supply to the router and then plug it into the electrical outlet. The LEDs will light up.
2. Connect the Internet network cable (for example, from your modem or other device) to the router’s Internet port;
3. Connect the computer to one of the LAN ports on the router using a network cable;
Note:
if you wish to access your router via Wi-Fi, access the wireless network named INTELBRAS or INTELBRAS_5G.
If you wish to perform this conguration using a smartphone, disable the mobile data network before proceeding with
the router settings.
4. Conguration
4.1. Conguration via web interface
On your computer, open your web browser (we recommend using the most current versions of Google Chrome®, Mozil-
la Firefox®or Microsoft Edge®) and go to
http://10.0.0.1
or
http://meuintelbras.local/
as shown in the following image.
This procedure should be performed whenever you need to change any conguration of your router.
Accessing the router conguration page
8
Your router’s login page will open.As factory default, the user is
admin
and the password is
admin
. Enter these creden-
tials in the corresponding elds and click on
Enter.
Login page
Note:
if access is not possible with these credentials:
1.
If your router is managed by your ISP or internet operator, please contact the service provider support.
2.
If your router is managed by yourself, please refer to the item
5. Dúvidas frequentes
or contact our support.
4.2. Dashboard
After logging in, you will see the
dashboard
screen (following gure), which contains the main router information: In-
ternet connection status, current band consumption,WAN settings, LAN settings, rmware version details, and number
of connected devices.
Dashboard
In the animation of the Internet circle, you can see the status of the Internet connection: if the connection is working,
you will see
Internet
Active
written; if there is any failure, you will see
Internet Inactive
written with a red sign.
9
Internet (WAN)
On the car titled
Internet (WAN)
, you can view the following Internet settings obtained: mode of operation, IP address,
subnet mask, gateway, WAN MAC address, DNS1, DNS2 and DNS3.
Local Area Network (LAN)
On the card titled
Local Area Network (LAN)
, you can view the following LAN settings obtained: IP address, subnet
mask, and LAN MAC address.
Details
On the card titled
Details
, you can view the following details: current rmware version of the router, product model, and
active time (without restarting) the router.
4.3. Network settings
In the main menu, available through the icon in the top left corner, you will have access to all the functions of
your product. Click the on menu and select the option
Network
.
Main menu
10
You will be directed to the network settings screen that contains 3 tabs:
WI-FI, INTERNET and LAN
, as shown in the
following image. By default, the
WI-FI
tab will be shown rst.
Wi-Fi settings editing screen
Wi-Fi network name and password
By default, the 2.4 GHz and 5 GHz networks will be named
INTELBRAS and INTELBRAS_5G
, respectively. You can
change the name and password of each separately by clicking on the icon and then on
Edit
to access the edit
screen, as shown in the following image.
Network name and password editing
» Network password: password you want for your Wi-Fi network. For example,
MyHome
. This eld allows you to create
a name with up to 32 characters.
Note:
we recommend that you congure different names for the 2.4 GHz and 5 GHz networks, e.g., MyHome and
MyHome5G. This will prevent possible network identication problems for Wi-Fi devices.
» Leave network open: if this option is active (gure above), your Wi-Fi network will be unprotected (no password) and
any device within range can connect to the network.
Indice
Altri manuali Intelbras Router wireless
