Pg-12
INSTALLATION INSTRUCTIONS
ADJUSTMENTS
4-
PHOTOCELL
ADJUSTMENT
SOMETIMES
THE
l\iOTION DETECTOR WILL
BE
MOUNTED IN AREAS SUCH AS CARPORTS OR SHEDS.
THESE
AREAS BECOME DARKER SOONER. YOU CAN
USE
THE PHOTOCELL ADJUST11:ENT TO HAVE
THE
MOTION
DETECTOR COME ON EARLIER OR LATER
IN
THE EVE-
NING.
AD~JUST
CLOCKWISE
FOR
EARLIER, (LIGHTER) OPERA-
TION, AND COUNTER CLOCKWISE
FOR
LATER, (DARKER)
OPERATION.
S-
TIME
ADJUSTMENT
SWITCH
THERE
ARE
4
POSITIONS
FOR
THIS
SWITCH:
TEST
WHEN
THE
SWITCH IS
SET
IN THE TEST POSITION,
THE
DAYLIGHT PHOTOCELL SENSOR IS BYPASSED, AND THE
MOTION DETECTOR WILL TRIGGER WITH MOTION, STAY
ON FOR A
FEW
SECONDS, AND
THEN
SHUT OFF. THIS
FEATURE IS CONVENIENT FOR TESTING
THE
AREA TO
BE COVERED. REMEMBER, ONCE
THE
LIGHTS ARE TRIG-
GERED, ALL MOTION MUST STOP
IN
ORDER
FOR
THE
LIGHTS
TO
TURN OFF.
1·3·10
YOUR MOTION DETECTOR WILL
KEEP
THE LAMPS ON AS
LONG AS MOTION IS DETECTED. AFTER ALL MOTION
HAS STOPPED, THE LAMPS WILL STAY ON FOR
1,
3, OR 10
MINUTES DEPENDING ON THE SWITCH SETTING.
6-PHOTOCELL
THE
DAYLIGHT PHOTOCELL SENSOR
IS
LOCATED BE-
HIND
THE
CLEAR WINDOW.
DO
NOT OBSTRUCT
THE
WINDOW, OR YOUR UNIT
MAY
WORK 24 HOURS.
IF
THIS
IS
DESIRED,
USE
THE PHOTOCELL PLUG, ITEM #3.
INSTALLATION INSTRUCTIONS Pg-13
TROUBLESHOOTING
GUIDE
A.
LIGHTS
DO
NOT
COME
ON
AT
ALL:
1)
CHECKTO
SEE
IF
THERE IS POWERTO
THE
MOTION DETECTOR.
2)
MAKE SURE THAT
THE
LAMPS BEING USED ARE
WORKING.
3) SOMETIMES
THE
FIBER
WASHER
MAY
PREVENT PROPER BULB BASE CONTACT.
4) CHECKALL WIRING AND CONNECTIONS.
A)
BLACK WIRE FROM HOUSE TO BLACK
WIRE FROM MOTION DETECTOR.
B) ALL WHITE WIRES TOGETHER.
C)
RED WIRE FROM MOTION DETECTOR TO
BLACK LAMP HOLDER WIRES.
5)
IN
THE
1, 3, AND 10 SWITCH SETTINGS,
THE
LAl'\1P
WILL NOT TURN ON DURING
THE
DAY.
B.
LIGHTS
STAY
ON
ALI
..
DAY AND
NIGHT:
1)
TO MAKE SURE THAT YOUR MOTION DETECTOR
IS NOT SWITCHING INTO
THE
MANUAL
OVERRIDE MODE BECAUSE
OF
POWER SURGES,
SLIDE YOUR MANUAL OVERRIDE BYPASS
SWITCH TO
THE
ON POSITION.
2) CHECKALL WIRING AND CONNECTIONS.
A)
BLACK WIRE FROM HOUSE TO BLACK
WIRE FROM MOTION DETECTOR.
B)
ALL
WHITE WIRES TOGETHER.
C)
RED WIRES FROM MOTION DETECTOR TO
BLACK LAMP HOLDER WIRES.
C.
MOTION
DETECTOR
TRIGGERS
ON
WITH
MOTION,
AND
STAYS ON:
1)
MOVE THE FLOODLAMPS
AWAY
FROM
THE
l\10TION DETECTOR HEAD, OR
USE
LOWER
WATTAGE ENERGY SAVING BULBS.
