Intelix DIGI-1X4B-1H Istruzioni operative

8001 Terrace Ave
Suite 201
Middleton, WI 53562
Rev 141231 Phone: 608-831-0880
Toll-Free: 866-462-8649
Fax: 608-831-1833
DIGI-1X4B-1H Installaon and
Operaon Guide

DIGI-1X4B-1H Installaon Guide
2

DIGI-1X4B-1H Installaon Guide
3
Important Safety Instrucons
Read all of these instrucons. Save them for future reference.
»Follow all warnings and instrucons marked on the device.
»This product is for indoor use only.
»Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.
»Do not use the device near water.
»Do not place the device near, or over, radiators or heat registers.
»The device cabinet is provided with slots and openings to allow for adequate venlaon. To ensure reliable operaon, and to
protect against overheang, these openings must never be blocked or covered.
»The device should never be placed on a so surface (bed, sofa, rug, etc.) as this will block its venlaon openings. Likewise, the
device should not be placed in a built in enclosure unless adequate venlaon has been provided.
»Never spill liquid of any kind on the device.
»Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Clean only with a dry cloth.
»The device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of
power available, consult your dealer or local power company.
»To prevent damage to your installaon it is important that all devices are properly grounded.
»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
»Use only accessories specied or recommended by Intelix.
»Explanaon of graphical symbols:
◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle symbol is
intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure
which may be of sucient magnitude to constute a risk of shock to a person or persons.
◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended to alert
the user to the presence of important operang and maintenance (servicing) instrucons in the literature
accompanying the product.
»Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or
tripped over. If an extension cord is used with this device make sure that the total of the ampere rangs of all products used on
this cord does not exceed the extension cord ampere rang. Make sure that the total of all products plugged into the wall outlet
does not exceed 15 amperes.
»To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line
condioner, or uninterrupble power supply (UPS).
»Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulng
in a risk of re or electrical shock.
»Do not aempt to service the device yourself. Refer all servicing to qualied service personnel.
»If the following condions occur, unplug the device from the wall outlet and bring it to qualied service personnel for repair.
◊ The power cord or plug has become damaged or frayed.
◊ Liquid has been spilled into the device.
◊ The device has been exposed to rain or water.
◊ The device has been dropped, or the cabinet has been damaged.
◊ The device exhibits a disnct change in performance, indicang a need for service.
◊ The device does not operate normally when the operang instrucons are followed.
»Only adjust those controls that are covered in the operang instrucons. Improper adjustment of other controls may result
in damage that will require extensive work by a qualied technician to repair.
»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a cart is used,
use cauon when moving the cart/equipment combinaon to avoid injury from p-over.
»Unplug this apparatus during lightning storms or when unused for long periods of me.

DIGI-1X4B-1H Installaon Guide
4
Table of Contents
Product Overview��������������������������������������������������������������������������������������������������������������������������������������� 5
Package Contents ��������������������������������������������������������������������������������������������������������������������������������������� 6
Front and Rear Panels��������������������������������������������������������������������������������������������������������������������������������� 7
Front Panel���������������������������������������������������������������������������������������������������������������������������������������������������� 7
Rear Panel ����������������������������������������������������������������������������������������������������������������������������������������������������� 8
Installaon Instrucons ������������������������������������������������������������������������������������������������������������������������������ 9
Quick Start ���������������������������������������������������������������������������������������������������������������������������������������������������� 9
Mount the Distribuon Amplier������������������������������������������������������������������������������������������������������������������ 9
Shelf Mounng Instrucons ................................................................................................................... 9
Table Mounng Instrucons ................................................................................................................... 9
Set EDID Mode and Device ID ���������������������������������������������������������������������������������������������������������������������10
Connect Source �������������������������������������������������������������������������������������������������������������������������������������������10
Connect Displays�����������������������������������������������������������������������������������������������������������������������������������������11
HDMI Output ........................................................................................................................................11
HDBaseT Outputs .................................................................................................................................11
Connect IR Control ��������������������������������������������������������������������������������������������������������������������������������������12
Source Device Control via Remote IR ...................................................................................................12
Remote Display Control via Local IR .....................................................................................................12
Connect RS232 Control��������������������������������������������������������������������������������������������������������������������������������13
Daisy-chain Addional Distribuon Ampliers �������������������������������������������������������������������������������������������14
Assign Unique Idener for RS232 Control ..........................................................................................14
Daisy-chain Cabling ...............................................................................................................................14
Apply Power ������������������������������������������������������������������������������������������������������������������������������������������������ 15
Verify Signal Status �������������������������������������������������������������������������������������������������������������������������������������15
RS232 Protocol ����������������������������������������������������������������������������������������������������������������������������������������� 16
Video Output On and O ����������������������������������������������������������������������������������������������������������������������������16
RS232 to Displays via HDBaseT�������������������������������������������������������������������������������������������������������������������17
Troubleshoong ��������������������������������������������������������������������������������������������������������������������������������������� 18
Distribuon amplier does not power on ���������������������������������������������������������������������������������������������������18
No video from HDBaseT output ������������������������������������������������������������������������������������������������������������������18
Distorted or no video output�����������������������������������������������������������������������������������������������������������������������18
Cannot hear HDMI input audio�������������������������������������������������������������������������������������������������������������������18
Technical Specicaons ���������������������������������������������������������������������������������������������������������������������������� 19

DIGI-1X4B-1H Installaon Guide
5
The Intelix DIGI-1X4B-1H is an HDMI distribuon amp with four HDBaseT outputs and one HDMI Loop output.
This distribuon amplier is designed for any system that requires an HDMI signal to be distributed to mulple
remote locaons.
The Intelix DIGI-1X4B-1H features HDBaseT twisted pair extension for four outputs, allowing the same signal
to be routed to a remote desnaon with an HDBaseT receiver. The HDBaseT ports support up to 4Kx2K HDMI
video with audio, wide-band IR tunneling (for IR control of source or displays), RS232 tunneling, and HDCP up
to 60 meters (196 feet). Each HDBaseT output port supplies power to the aached extender, eliminang the
need for a power supply at the display end.
The Intelix DIGI-1X4B-1H is designed with an HDMI loop out which is intended to cascade to addional units,
allowing for system expansion for larger systems. A unique control design allows the RS232 port to be addressed
and cascaded, allowing control commands to be discretely directed to the RS232 port of any aached HDBaseT
receiver. This design allows third party control systems to reduce the number of COM ports required, thus
reducing hardware costs.
The Intelix DIGI-1X4B-1H is HDMI compable and supports up to 4kx2k resoluons, Deep Color, and full 3D
capabilies. The DA features advanced EDID and HDCP handling, including EDID copy and preset modes.
Product Overview

DIGI-1X4B-1H Installaon Guide
6
Package Contents
24V DC 2.5A Power
Supply
1 ea
RS232 Cable
1 ea
IR Loop Cable
1 ea
IR Emier
1 ea
DIGI-1X4B-1H Installaon
and Operaon Guide
1 ea
DIGI-1X4B-1H Distribuon
Amplier
1 ea
Mounng Rails with Screws
2 ea
US IEC Power Cable
1 ea
RS232 Loop Cable
1 ea
IR Receiver
1 ea
Please verify the following items are in the shipping box prior to installaon of the DIGI-1X4B-1H.
Shelf Feet with Screws
4 ea

DIGI-1X4B-1H Installaon Guide
7
Front and Rear Panels
Front Panel
1 2 3 4 5
6
1. Power Indicator LED
2. Firmware Update Port
3. HDMI Input Indicator LED
4. HDMI Output Indicator LED
5. HDBaseT Link Indicator LED (4 ea)
6. HDBaseT HDCP Indicator LED (4 ea)

DIGI-1X4B-1H Installaon Guide
8
Rear Panel
A B C D E F HG
KJI
A. HDMI Input
B. HDMI Output
C. HDBaseT Outputs with PoE (4 ea)
D. IR Input
E. ID Selector
F. RS232 Input
G. EDID Selector Switches
H. 24V DC Input
I. IR Loop
J. IR Output
K. RS232 Loop

DIGI-1X4B-1H Installaon Guide
9
Installaon Instrucons
Quick Start
Mount the Distribuon Amplier
Shelf Mounng Instrucons
Table Mounng Instrucons
1. Mount the distribuon amplier
2. Set EDID mode and device ID
3. Connect source
4. Connect displays
5. Connect IR control
6. Connect RS232 control
7. Daisy-chain addional distribuon ampliers
8. Apply power
9. Verify signal status
At least 2 inches of free air space is required on both sides of the DIGI-1X4B-1H for proper side venlaon.
Avoid mounng the DIGI-1X4B-1H near a power amplier or any other source of signicant heat.
Aach the shelf feet to the boom of the DIGI-1X4B-1H.
Aach the mounng rails to the sides of the DIGI-1X4B-1H.
Once the rails are installed, the distribuon amplier is ready
to be mounted under a table or onto a wall.
Currently, there is not a rack mounng kit available for the
DIGI-1X4B-1H.

DIGI-1X4B-1H Installaon Guide
10
Set EDID Mode and Device ID
Connect Source
Set the EDID of the DIGI-1X4B-1H to the highest compable
resoluon of all displays to be connected to the device.
DIP Switch Sengs Resoluon
Down, Down, Down, Down 1080p/60; Stereo PCM
Down, Down, Down, Up 720p/60; Stereo PCM
Down, Down, Up, Down 1280x800/60; Stereo PCM
Down, Down, Up, Up 1024x768/60; Stereo PCM
Down, Up, Down, Down 1920x1200/60; Stereo PCM
Connect the source devices to HDMI inputs using HDMI cables
that are less than or equal to 5 meters in length. For source
devices that are further away, an HDMI extension device will be
required to complete the connecon.
When sending RS232 through the HDBaseT outputs to the
displays, each distribuon amplier must have a unique
idener assigned to it.
The rotary switch is labeled in hexadecimal (Hex), while the
RS232 commands use decimal (Dec). Use a small, at blade
screwdriver to set the ID of each DIGI-1X4B-1H to a dierent
hexadecimal value.
Hex Dec Hex Dec Hex Dec Hex Dec
0 00 4 04 8 08 C12
1 01 5 05 9 09 D 13
2 02 6 06 A 10 E 14
3 03 7 07 B 11 F 15
Indice
Altri manuali Intelix Amplificatore

Intelix
Intelix DIGI-HD-1X8 Manuale utente

Intelix
Intelix DIGI-88FS Istruzioni operative

Intelix
Intelix INT-1X4B-1H Manuale utente

Intelix
Intelix HDMI-2X2 Manuale utente

Intelix
Intelix HDMI-2X8 Manuale utente

Intelix
Intelix AUDISEY Athena Manuale utente

Intelix
Intelix HD14S Manuale utente

Intelix
Intelix AUD-220 Manuale utente

Intelix
Intelix VGADA-2 Manuale utente

Intelix
Intelix VGA2-DA4 Manuale utente


















