Intelligent Home Thor Manuale utente

Video Door Entry System

user manual

CALL

UNLOCK

TALK/MON

IN-USE

www.intelligenthomeonline.com

Thor

PRECAUTIONS

●Read this manual through before using the product.

●Slots or openings in the back of the monitor, are provided for ventilation

and to ensure reliable operation of the video monitor or equipment and

to protect if from overheating. These openings must not be blocked or

covered. The monitor should never be placed near or over a radiator or

heat register and should not be placed in a built-in installation such as a

bookcase unless proper ventilation is provided.

●All parts should be protected from violence vibration. And not allow be

impacting, knocking and dropping.

●For clean the LCD screen, using hands or wet cloth is forbidden.

●Please do the cleanness with soft cotton cloth, please do not use the

organic or chemical clean impregnate. If necessary, please use pure

water or dilute soap water to clean the dust.

●Image distortion may occur if the video door phone is mounted too close

to magnetic eld e. g. Microwaves, TV, computer etc.

●Please keep away the video door monitor from wet, high temperature,

dust, and caustic and oxidation gas in order to avoid any unpredictable

damage.

●Do NOT open the device in any condition, call the administrator for help

if there is any problem or mulfunction happens.

CONTENT

1. Monitor Parts and Functions ------------------------1

2. Monitor Mounting --------------------------------1

3. System Connection- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

4. Multiple Monitors Connection(optional) -----------------3

5. Multiple Door Cameras Connection(optional) ------------4

6. Talk/Unlock Operation -----------------------------5

7. Entrance Monitoring ------------------------------5

8. Ring Tone Setting --------------------------------6

9. Ring Volum Setting -------------------------------6

10. Intercom -------------------------------------7

11. Unlock Setting ---------------------------------7

12. Monitor Time Setting -----------------------------8

13. Screen Setting ---------------------------------8

14. Restore to Default-------------------------------8

15. Built-in Memory and SD Card ----------------------9

16. Connection Other Device to Monitor -----------------12

17. Specications---------------------------------13

-1-

1. Monitor Parts and Functions

2. Monitor Mounting

CALL

UNLOCK

TALK/MON

IN-USE

LCD Touch Screen

LED indicator

UNLOCK button

CALL button

TALK/MON button

Speaker

DIP switch

BUS port

Ventilation Vent

Extending port

Microphone

1 2 3 4 5 6

DIPS

145~160 cm

1. Use the screws to x the Mounting Bracket on the wall.(tting accesories includes a Bracket )

2. Wire the system correctly(see the later connection chapter) then hang the Monitor on the

Mounting Bracket rmly.

-2-

3. System Connection

●Note 1: Mount the DPS and PS5 side by side on the DIN nail or on the wall.

●Note 2: See Door Camera manual for detail information.

●Note 3: Connect the DPS to the output of PS5, non-polarity connection.

●Note 4: The bit-1 to bit-5 DIP switches are for Monitor address settings when multiple Monitors

installed, the bit-6 is for video impedance setting. When there is only one Monitor installed, set all the

bit-1 to bit-5 to OFF state, and set the bit-6 to ON position.

●Note 5: Conncet to the AC Mains electricity, 100~240 V AC.

●Note 6: Non-polarity 2 wire bus cable. See Table 3-1 for cable usage information.

Cable type Max. distance(meters)

RVV 2 * 1.5 mm2150 (Non-shielded, Twisted)

RVV 2 * 1.0 mm2100 (Non-shielded, Twisted)

RVV 2 * 0.75 mm275 (Non-shielded, Twisted)

Table 3-1

Note 6

Note 4

Camera Monitor

Note 2

Note 5

Note 3

Note 1

L1 L2 PL S1+ S2+ S-

AC~

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

DPS

PS5

UNLOCK

INTERCOM

MON/TALK

IN-USE

-3-

4. Multiple Monitors Connection(optional)

●Note 1: Set to [8000] on the Installation settings page for Master unit(by default).

●Note 2: Set to [8001] on the Installation settings page for Slave unit 1.

●Note 3: Set to [8002] on the Installation settings page for Slave unit 2.

●Note 4: Set to [8003] on the Installation settings page for Slave unit 3.

●Note 5: The bit-1 to bit-5 of all the Monitors are set to OFF. The bit-6 set to OFF for 1#, 2# and 3#

Monitors.

●Note 6: All the connectors must use In-Out connection.

●Note 7: The bit-6 of the 4# Monitor must set to ON state.(the bit-6 of all the Monitors should be set to

OFF state except the last one which is at the end of the bus line).

How to set the Slave Address:

Get into the Installation settings page(see

11.Unlock setting). On the 2# Monitor, input [8001]

and press to confirm; on the 3# Monitor,

input [8002] and press to conrm; on the 4#

Monitor, input [8003] and press to conrm.

Note 1

Note 6

Note 2 Note 3 Note 4

Note 5 Note 7

L1 L2 PL S1+ S2+ S-

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

1# Monitor 2# Monitor 3# Monitor 4# Monitor

DPS

PS5

UNLOCK

INTERCOM

MON/TALK

IN-USE

UNLOCK

INTERCOM

MON/TALK

IN-USE

UNLOCK

INTERCOM

MON/TALK

IN-USE

UNLOCK

INTERCOM

MON/TALK

IN-USE

Camera

Code Number:[----]

[0010]#:Remove all remote control

[0011]#:Add remote control

[8000]#:Set as master unit 0

[8001]#:Set as slaver unit 1

[8002]#:Set as slaver unit 2

[8003]#:Set as slaver unit 3

[8004]#:Set as guard unit

[8005]#:Set as not guard unit

[8010]#:Set lock mode to 0

[8011]#:Set lock mode to 1

[8021]#:Set the lock time of 1s

[8022]#:Set the lock time of 2s

[8023]#:Set the lock time of 3s

[8024]#:Set the lock time of 4s

[8025]#:Set the lock time of 5s

[8026]#:Set the lock time of 6s

[8027]#:Set the lock time of 7s

[8028]#:Set the lock time of 8s

[8029]#:Set the lock time of 9s

Cancel

Installation settings:

-4-

5. Multiple Door Cameras Connection(optional)

●Note 1: The settings for all the Monitors are the same as chapter 4 Multiple Monitors

connection.

●Note 2: The DBC-4 unit is not included and should be bought separately.

Note 1

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

1 2 3 4 5 6

DIPS

SW+

SW-

RING

GND

VIDEO

UNLOCK

INTERCOM

MON/TALK

IN-USE

UNLOCK

INTERCOM

MON/TALK

IN-USE

UNLOCK

INTERCOM

MON/TALK

IN-USE

UNLOCK

INTERCOM

MON/TALK

IN-USE

Note 2

L1 L2 PL S1+ S2+ S- L1 L2 PL S1+ S2+ S-L1 L2 PL S1+ S2+ S-L1 L2 PL S1+ S2+ S-

AC~

1# Camera2# Camera3# Camera4# Camera

DPS

PS5

A B C D

BUS

DBC4

-5-

6. Talk/Unlock Operation

7. Entrance Monitoring

2. Press TALK/MON Button or icon, you can talk with the visitor for 90 seconds. During

talking state, press the TALK/MON Button again or press icon to end the conversation. If

nobody answers the phone, the screen will be turned off automatically after 30 seconds. If the

system connects two or more Monitors, when any Monitor starts to talk, the other Monitors will

be automatically shut off.

3. During the conversation, press UNLOCK Button or icon to unlock the door.

4. During the conversation, press icon to record the current picture. If the Auto-Record

function has been turned on (see chapter 12), a picture will be recorded automatically 3 seconds

after the Call Button of the Camera pressed.

1. When visitor presses the Call Button on the Outdoor Station, the Monitor(s) will ring, at the same

time, the screen displays the visitor image.

Name B

Name A

CALL

UNLOCK

TALK/MON

IN-USE

Home

Unlock

Talk

Standard

Screen

Capture

1:1

Press TALK/MON button on monitor in standby

mode,or touch Monitor icon on home

screen.the screen will display the view of the

Outdoor Station. During monitoring, touch

Manual Monitor icon to get into the camera

switching mode, (or directly touch Manual

Monitor icon on home screen), if multi Door

Stations are installed, you can press the camera

1/2/3/4 to monitor the Door Station or CCTV

camera you want.press Home icon to exit

and enter home screen page.

CALL

UNLOCK

TALK/MON

IN-USE

Camera 1 Camera 2 Camera 3 Camera 4

2 3 41

09/30/2010 Thu.16:41

Home

Monitor

Time

-6-

8. Ring Tone Setting 9. Ring Volum Setting

12 pieces ring tone can be selected. When

the Monitor is in standy, press anywhere

on the screen, a full screen calendar will be

showed.

You can set a ring volume for day time,6:00

AM~18:00 PM is the day time by default.

Touch the scteen tiwce to enter home

screen page, then touch User Setup

icon to enter next page,and then touch

Ring Volume icon to enter Ring Volume

page,Touch / icon to decrease/

increase the volume.and then touch

icon to save and exit,or touch icon to

unsave and exit.

You can active a ring volume for night

time,18:00 PM~6:00 AM is the night time by

default,if you don't want to be disturbed at

night ,you can set the volume to 0. Touch

the scteen tiwce to enter home screen page,

touch User Setup icon to enter next

page, then touch Night Ring Volume

icon to enter Night Ring Volume page,Use

/ icon to decrease/increase the

volume.After setting a value you want, you

should touch Ring Volume icon to

active the setting, after that the Ring Volume

icon will change to Night Ring Volume icon.

then touch icon to save and exit.

Touch the screen again to enter the main

menu. then touch User Setup icon to

enter call tone setting screen,touch Door

station call tone/intercom call tone/door

bell call tone,12 pieces ring tones will be

displayed ,you can choose a ring tone which

you want,and then touch icon to save

and exit,or touch icon to unsave and

exit.

1. Current date.

2. Current weekday.

3. Current time.

CALL

UNLOCK

TALK/MON

IN-USE

09/30/2010

16:41

Thu.

CALL

UNLOCK

TALK/MON

IN-USE

Door Station

Call Tone

Exit&Save

Carman

Ding Dong

Rhythm of the rain

For Elise

Sonatine

Edelweiss

Going Home

Congratulate

Do Re Me

Happy Birthday

Jingle Bell

Telephone Ring

Exit&Unsave

CALL

UNLOCK

TALK/MON

IN-USE

Ring Volume

Adjust - Adjust +

Exit&Save

Exit&Unsave

CALL

UNLOCK

TALK/MON

IN-USE

Night Ring

Volume Night Ring

Volume

Adjust - Adjust +

Exit&Save

Exit&Unsave

-7-

10. Intercom

11. Unlock Setting

When multiple monitors are installed,

intercom function is available. Intercom can

be initiated by either Monitor. Press the

CALL Button, then touch the Inner Call

icon the other Monitor will ring. Press TALK

Button on the other Monitor to answer.

When the Monitor is in standby, press the

screen to open the time screen, press

again to enter the main menu. then touch

icon on the bottom left to enter

Information page:

On the Information page, press the screen

on hold for 2 seconds to enter the page

below:

The default setting for the Unlock mode

is mode 0; and default Unlock time is 1

second. The Unlock mode and Unlock

time settings is according to the e-lock you

used, see Door Camera manual for detail

information.

To change the unlock mode, input [8010] or

[8011], then touce to conrm; to change

Unlock time, input[8021]~[8029] for 1 to

9 second Unlock time and touce to

conrm.

use to cancel the input; use to save

the setting. Touch icon to return last

page.

Touch the Installer setup icon to enter

the installation settings page:

To end the intercom conversation, press

TALK. If no one answers, it will exit

automatically after 30 seconds.

The doorbell function will always override

the intercom function.

Note: the Intercom by Namelist and Direct

Call Guard Unit function is reserved.

CALL

UNLOCK

TALK/MON

IN-USE

Intercom

by Namelist

Inner CallD irect Call

Guard Unit

09/30/2010 Thu.16:41

Home

CALL

UNLOCK

TALK/MON

IN-USE

H/W --- a1.3

S/W: V11.01008.00

Voltage: ---

Local addr: 01.00

Unlock timing: 5s

Video standard: PAL

Cancel

CALL

UNLOCK

TALK/MON

IN-USE

Home

Installer

setup

Device

Property

Caliber

TouchScreen

CALL

UNLOCK

TALK/MON

IN-USE

Code Number:[----]

[0010]#:Remove all remote control

[0011]#:Add remote control

[8000]#:Set as master unit 0

[8001]#:Set as slaver unit 1

[8002]#:Set as slaver unit 2

[8003]#:Set as slaver unit 3

[8004]#:Set as guard unit

[8005]#:Set as not guard unit

[8010]#:Set lock mode to 0

[8011]#:Set lock mode to 1

[8021]#:Set the lock time of 1s

[8022]#:Set the lock time of 2s

[8023]#:Set the lock time of 3s

[8024]#:Set the lock time of 4s

[8025]#:Set the lock time of 5s

[8026]#:Set the lock time of 6s

[8027]#:Set the lock time of 7s

[8028]#:Set the lock time of 8s

[8029]#:Set the lock time of 9s

Cancel

Installation settings:

Indice

Altri manuali Intelligent Home Sistema di interfono

Intelligent Home

Intelligent Home DX-471 Manuale utente

Intelligent Home

Intelligent Home Luna Manuale utente

Intelligent Home

Intelligent Home CAT-5 Series Manuale utente

Intelligent Home

Intelligent Home 7Avro610C Manuale utente

Intelligent Home

Intelligent Home MR9L Manuale utente

Intelligent Home

Intelligent Home MR7D Manuale utente

Intelligent Home

Intelligent Home 692SD Manuale utente

Intelligent Home

Intelligent Home Cat-5 network cable Manuale utente

Intelligent Home

Intelligent Home CAT-5 Series Manuale utente

Intelligent Home

Intelligent Home Cronus 4-wire Manuale utente

Intelligent Home

Intelligent Home Alecto Manuale utente

Intelligent Home

Intelligent Home NTI700 Manuale utente

Intelligent Home

Intelligent Home DT591 Manuale utente

Intelligent Home

Intelligent Home IH692SD Manuale utente

Intelligent Home

Intelligent Home DT6913SD Manuale utente

Intelligent Home

Intelligent Home Cronus Manuale utente

Intelligent Home

Intelligent Home IH-6912 Slave Manuale utente

Intelligent Home

Intelligent Home IH691 Manuale utente

Intelligent Home

Intelligent Home IH6913 Manuale utente

Intelligent Home

Intelligent Home IH-6912 Slave Manuale utente

Intelligent Home

Intelligent Home DT-ENG-692SD-V2 Manuale utente

Intelligent Home

Intelligent Home Alecto Manuale utente

Intelligent Home

Intelligent Home IH-692 Slave Manuale utente

Intelligent Home

Intelligent Home LEDA Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente