1. INTRODUCTION
TheUFM seriesis designedand programmed according toNTEP and
Measurement Canada requirements.
These indicatorsare sealedto preventunauthorizedaccesstointernal
parts. Endusers should be advisednot toundertake anytroubleshooting
except thoselisted inthe operation manual.
This maintenancemanualcontains of certain information thatmay result
infraudulent use. Donotreleaseanypartof thismanual to anyend
users or un-authorizedpersons.
Theinternalminijumper shouldbe so setto prevent un-authorized
settings or alterations.
Ifaloadcell has been replaced, makesurethat the protection devices
are correctly set.
After servicing,itis necessary togothrough alltestsand procedures
to ensure theindicator meetsall the meteorological and approval
requirements.
Features of the UFM series
1.Designed to meet NTEP & MEASUREMENT CANADA requirements.
2.ZeroIndicator.
3.TareIndicator.
4.FullTareFunction (Subtractive)
5.Negative ValueIndicator.
6.AutoTareFunction.
7.Power on Zero Function.
8.Manual Zero Function.
9.Average Function.
10.AutoPower Saving Function.
11.Metric/AvoirdupoisConversionFunction(whereitislegalforuse).
12.Large Size WTNLCD display, 5 x 51mm.
13.Low Battery WarningSignal.
14.2 Point Calibration.
15.MiniJumper toPrevent End-user Calibration.
16.Optional EL Backlight.
17.Optional Printer and RS232C Interface.
18.Accumulation Function Available.
19.Built-in Rechargeable BatteryOperated.
20.Battery Operating time: 200 Hours Plus with Full Charge.
21.Gravity Compensation Software
