Intellio ILB-340-SD Manuale utente

ILB-340-SD

Intellio Speed Dome Camera

User manual

Network Speed Dome

User Manual

User Manual of Intellio ILB-340-SD Speed Dome Camera

About this Manual

This Manual is applicable to Intellio ILB-340-SD Speed Dome Camera.

The Manual includes instructions for using and managing the product. Pictures, charts, images and all

other information hereinafter are for description and explanation only. The information contained in

the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find

the latest version in the company website (www.intellio.hu).

Please use this user manual under the guidance of professionals.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS, AND

OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-

INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL OUR COMPANY, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF

THIS PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT

YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED

WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with

"CE" and comply therefore with the applicable harmonized European standards

listed under the Low Voltage Directive 2015/35/EU, the EMC Directive

2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection

point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid

danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.

Warnings Follow these safeguards to prevent

serious injury or death.

Cautions Follow these precautions to prevent

potential injury or material damage.

Warnings:

Adopt the power adapter which can meet the safety extra low voltage (SELV) standard. The

power consumption cannot be less than the required value.

Do not connect several devices to one power adapter as an adapter overload may cause over-

heating and can be a fire hazard.

When the product is installed on a wall or ceiling, the device should be firmly fixed.

To reduce the risk of fire or electrical shock, do not expose the indoor used product to rain or

moisture.

This installation should be made by a qualified service person and should conform to all the

local codes.

Install blackouts equipment into the power supply circuit for convenient supply interruption.

If the product does not work properly, contact your dealer or the nearest service center. Never

attempt to disassemble the product yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Cautions:

If the camera fails to synchronize local time with that of the network, you need to set up

camera time manually. Visit the camera (via web browser or Intellio Video System software)

and enter system settings interface for time settings.

Make sure the power supply voltage is correct before using the product.

Do not drop the product or subject it to physical shock. Do not install the product on vibratory

surface or places.

Do not expose it to high electromagnetic radiating environment.

Do not aim the lens at the strong light such as sun or incandescent lamp. The strong light can

cause fatal damage to the product.

The sensor may be burned out by a laser beam, so when any laser equipment is being used,

make sure that the surface of the sensor not be exposed to the laser beam.

For working temperature, refer to the specification manual for details.

To avoid heat accumulation, good ventilation is required for a proper operating environment.

While shipping, the product should be packed in its original packing.

Use the provided glove when open up the product cover. Do not touch the product cover with

fingers directly, because the acidic sweat of the fingers may erode the surface coating of the

product cover.

Use a soft and dry cloth when clean inside and outside surfaces of the product cover. Do not

use alkaline detergents.

Improper use or replacement of the battery may result in hazard of explosion. Use the

manufacturer recommended battery type.

Table of Contents

1.1 SYSTEM REQUIREMENT ..................................................................................................................1

1.2 FUNCTIONS..................................................................................................................................1

2.1 SETTING THE NETWORK CAMERA OVER THE LAN................................................................................4

2.1.1 Wiring over the LAN.............................................................................................................4

2.1.2 Activating the Camera .........................................................................................................5

2.2 SETTING THE NETWORK CAMERA OVER THE WAN ..............................................................................6

2.2.1 Static IP Connection .............................................................................................................6

2.2.2 Dynamic IP Connection ........................................................................................................7

3.1 ACCESSING BY WEB BROWSERS .......................................................................................................9

4.1 POWER-UP ACTION.....................................................................................................................10

4.2 CONFIGURING LOCAL PARAMETERS ................................................................................................10

4.3 LIVE VIEW PAGE .........................................................................................................................11

4.4 STARTING LIVE VIEW ...................................................................................................................13

4.4.1 Live Operation....................................................................................................................13

4.4.2 Install Plug-in .....................................................................................................................15

4.5 OPERATING PTZ CONTROL ...........................................................................................................15

4.5.1 PTZ Control Panel...............................................................................................................16

4.5.2 Auxiliary Functions.............................................................................................................18

4.5.3 Setting/Calling a Preset .....................................................................................................19

4.5.4 Setting/Calling a Patrol......................................................................................................21

4.5.5 One-touch Patrol................................................................................................................22

4.5.6 Setting/Calling a Pattern ...................................................................................................23

4.6 PLAYBACK..................................................................................................................................24

4.6.1 Play Back Video Files..........................................................................................................24

4.6.2 Downloading Video Files....................................................................................................26

4.7 PICTURES ..................................................................................................................................26

5.1 STORAGE SETTINGS .....................................................................................................................28

5.1.1 Configuring Recording Schedule ........................................................................................28

5.1.2 Configuring Capture Schedule ...........................................................................................30

5.1.3 Configuring Net HDD .........................................................................................................31

5.2 BASIC EVENT CONFIGURATION.......................................................................................................34

5.2.1 Configuring Motion Detection ...........................................................................................34

5.2.2 Configuring Video Tampering Alarm..................................................................................39

5.2.3 Configuring Alarm Input ....................................................................................................41

5.2.4 Configuring Alarm Output .................................................................................................42

5.2.5 Handling Exception ............................................................................................................43

5.3 SMART EVENT CONFIGURATION.....................................................................................................44

5.3.1 Detecting Audio Exception .................................................................................................44

5.3.2 Configuring Face Detection................................................................................................45

5.3.3 Configuring Intrusion Detection.........................................................................................46

5.3.4 Configuring Line Crossing Detection ..................................................................................48

5.3.5 Configuring Region Entrance Detection.............................................................................50

5.3.6 Configuring Region Exiting Detection ................................................................................51

5.3.7 Unattended Baggage Detection ........................................................................................53

5.3.8 Object Removal Detection .................................................................................................54

5.4 PTZ CONFIGURATION ..................................................................................................................55

5.4.1 Configuring Basic PTZ Parameters .....................................................................................55

5.4.2 Configuring PTZ Limits .......................................................................................................57

5.4.3 Configuring Initial Position.................................................................................................58

5.4.4 Configuring Park Actions ...................................................................................................59

5.4.5 Configuring Privacy Mask ..................................................................................................60

5.4.6 Configuring Scheduled Tasks..............................................................................................61

5.4.7 Clearing PTZ Configurations ..............................................................................................62

5.4.8 Configuring Smart Tracking ...............................................................................................63

5.4.9 Prioritize PTZ ......................................................................................................................64

5.4.10 Position Settings ............................................................................................................64

5.4.11 Rapid Focus....................................................................................................................65

6.1 CONFIGURING NETWORK SETTINGS................................................................................................67

6.1.1 Basic Settings.....................................................................................................................67

6.1.2 Advanced Settings .............................................................................................................72

6.2 CONFIGURING VIDEO AND AUDIO SETTINGS.....................................................................................84

6.2.1 Configuring Video Settings ................................................................................................84

6.2.2 Configuring Audio Settings ................................................................................................85

6.2.3 Configuring ROI Settings ....................................................................................................86

6.2.4 Display Info. on Stream......................................................................................................88

6.3 CONFIGURING IMAGE SETTINGS.....................................................................................................88

6.3.1 Configuring Display Settings ..............................................................................................88

6.3.2 Configuring OSD Settings...................................................................................................93

6.3.3 Configuring Image Parameters Switch ..............................................................................94

6.4 CONFIGURING SYSTEM SETTINGS ...................................................................................................95

6.4.1 System Settings..................................................................................................................95

6.4.2 Maintenance......................................................................................................................99

6.4.3 Security ............................................................................................................................102

6.4.4 User Account....................................................................................................................105

User Manual of Intellio ILB-340-SD Speed Dome Camera

Chapter 1 Overview

1.1 System Requirement

System requirement of web browser accessing is as follows:

Operating System: Microsoft Windows 7 and above version

CPU: Intel Pentium IV 3.0 GHz or higher

RAM: 1G or higher

Display: 1024 ×768 resolution or higher

Web Browser: Internet Explorer is recommended

Note:

If you are using Google Chrome 57 and its above version or Mozilla Firefox 52 and its above version,

plug-in installation is not compulsory. But Picture and Playback of the camera are not available. If

you want to use the mentioned function, change the web browser to Internet Explorer.

1.2 Functions

PTZ Limits

The camera can be programmed to move within the PTZ limits (left/right, up/down).

Scan Modes

The camera provides 5 scan modes: auto scan, tilt scan, frame scan, random scan and panorama

scan.

Presets

A preset is a predefined image position. When the preset is called, the camera will automatically

move to the defined position. The presets can be added, modified, deleted and called.

Label Display

The on-screen label of the preset title, azimuth/elevation, zoom, time and camera name can be

displayed on the monitor. The displays of time and camera name can be programmed.

Auto Flips

In manual tracking mode, when a target object goes directly beneath the camera, the video will

automatically flips 180 degrees in horizontal direction to maintain continuity of tracking. This

function can also be realized by auto mirror image depending on different camera models.

Privacy Mask

This function allows you to block or mask certain area of a scene, for preventing the personal

privacy from recording or live viewing. A masked area will move with pan and tilt functions and

automatically adjust in size as the lens zooms telephoto and wide.

3D Positioning

On the web interface in live view, use the left key of mouse to click on the desired position in the

video image and drag a rectangle area in the lower right direction, then the camera system will

move the position to the center and allow the rectangle area to zoom in. Use the left key of mouse

to drag a rectangle area in the upper left direction to move the position to the center and allow

the rectangle area to zoom out.

Proportional Pan/Tilt

Proportional pan/tilt automatically reduces or increases the pan and tilt speeds according to the

amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower than at wide

zoom settings. This keeps the image from moving too fast on the live view image when there is a

large amount of zoom.

Auto Focus

The auto focus enables the camera to focus automatically to maintain clear video images.

Day/Night Auto Switch

The cameras deliver color images during the day. And as light diminishes at night, the cameras

switch to night mode and deliver black and white images with high quality.

Slow Shutter

In slow shutter mode, the shutter speed will automatically slow down in low illumination

conditions to maintain clear video images by extending the exposure time. The feature can be

enabled or disabled.

Backlight Compensation (BLC)

If you focus on an object against strong backlight, the object will be too dark to be seen clearly. The

BLC (Backlight Compensation) function can compensate light to the object in the front to make it

clear, but this causes the over-exposure of the background where the light is strong.

Wide Dynamic Range (WDR)

The wide dynamic range (WDR) function helps the camera provide clear images even under back

light circumstances. When there are both very bright and very dark areas simultaneously in the

field of view, WDR balances the brightness level of the whole image and provide clear images with

details.

White Balance (WB)

White balance can remove the unrealistic color casts. White balance is the white rendition function

of the camera to adjust the color temperature according to the environment automatically.

Patrol

A patrol is a memorized series of pre-defined preset function. The scanning speed between two

presets and the dwell time at the preset are programmable.

Pattern

A pattern is a memorized series of pan, tilt, zoom, and preset functions. By default the focus and

iris are in auto status during the pattern is being memorized.

Power Off Memory

The camera supports the power off memory capability with the predefined resume time. It

allows the camera to resume its previous position after power is restored.

Scheduled Task

A time task is a preconfigured action that can be performed automatically at a specific date and

time. The programmable actions include: auto scan, random scan, patrol 1-8, pattern 1-4, preset

1-8, frame scan, panorama scan, tilt scan, day, night, reboot, PT adjust, Aux Output, etc.

Park Action

This feature allows the camera to start a predefined action automatically after a period of inactivity.

User Management

The camera allows you to edit users with different levels of permission, in the admin login status.

Multiple users are allowed to access and control the same network camera via network

simultaneously.

3D Digital Noise Reduction

Comparing with the general 2D digital noise reduction, the 3D digital noise reduction function

processes the noise between two frames besides processing the noise in one frame. The noise will

be much less and the video will be clearer.

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente