Intergraph Zx10 Ultra-Tower Manuale utente
D1AA0036C, 09/00
ZX10
Late-Breaking News
Windows 2000
Localized Versions
On a system with Windows 2000 Korean, Japanese, or Simplified Chinese, the Windows 2000
interface will display in English after completing Setup. Windows 2000 will display in the proper
language after you restart the system for the first time.
Power Management
Pressing the system’s Power button momentarily does not run Automatic Shutdown. You can run
the utility from the operating system taskbar tray, or from Start » Automatic Shutdown Utility »
Automatic Shutdown Utility. See the System Guide for more information on Automatic Shutdown.
ACPI power settings that control what happens when you press the system's Power button are not
available. You can find these options by going to Start » Settings » Control Panel » Power Options
» Advanced. Regardless of the setting, the system powers off when you press its Power button.
Using current versions of Hardware Monitor and ECC Memory Monitor software prevents the use
of Hibernate or Standby modes. Updated versions that allow the use of these modes will be posted
to SGI’s online services when available.
You cannot use Hibernate or Standby modes on a system with these video controllers: Intense3D
Wildcat 4105, 4000.
Device Manager
If your system has a SAF-TE card installed on the RAID disk drive cage, Device Manager displays
the card under ? Other Devices. Despite this designation, the card is working properly.
Device Manager may display an error (!) for the VGA Controller on the following video
controllers: Intense3D Wildcat 4105, 4000. You may ignore this designation, as it does not affect
their operation:
Wildcat Graphics Driver
If you reinstall Windows 2000 on a system with Intense3D Wildcat graphics, you must install the
driver software for the Wildcat graphics controller after completing Windows 2000 Setup.
2
To install Wildcat graphics driver software in Windows 2000:
1. Log on to Windows 2000 using an account that has administrative privileges.
2. Insert the system’s driver CD in the system’s CD-ROM drive.
3. Right click My Computer and go to Manage » Device Manager » Other Devices » Video
Controller » Driver » Update Driver.
4. When the Upgrade Device Driver Wizard displays, click Next.
5. Select Search for a suitable driver for my device (recommended), and then click Next.
6. Make sure the Disk 1 folder for the Wildcat driver on the system's driver CD is selected as the
search location, and then click OK.
7. Under Driver Files Search Results, click Next to start the installation.
8. Change to the Disk 2 folder for the Wildcat driver when prompted, and then click OK to
continue with the installation.
9. Once the driver successfully installs, click Close.
CAUTION Windows 2000 recognizes the dual pipelines in a Wildcat 4110 or 4210 graphics
controller as two devices. Repeat Steps 2 through 7 to complete the installation for
the VGA-compatible video controller driver.
10. Restart the computer.
Mylex RAID Controller Driver
When installing Windows 2000 on a system with a Mylex 150 RAID controller, do not update the
controller’s driver software during Windows 2000 Setup. When Setup completes, update the
Mylex RAID driver software using the driver delivered on the system’s driver CD.
BIOS Requirement
BIOS version 01.00.07.00 or later is required for Windows 2000.
Windows NT
Setup and the Network Controller Driver
CAUTION When going through Windows NT Setup (for the first time or to reinstall Windows
NT), do not let Setup auto-detect and configure the system’s network controller. If
you do, the system may fail to operate correctly.
When going through Setup for the first time on a system running Windows NT Server, do the
following when asked if you want Setup to search for the network adapter:
1. Click Select from List and then click Have Disk.
3
2. In the text box, replace A: with \winnt\pro100plus, and then click OK. On a system with
Japanese Windows NT Server, replace A: with C: and then click OK.
3. When prompted to select the OEM option, click Intel PRO Adapter and then click OK.
When going through Setup at all other times, complete Setup without auto-detecting the system’s
network controller. When Setup completes, install the network controller driver software manually
from diskette.
Event Viewer Message at Startup
If you see a message in the Windows NT Event Viewer stating that the “description for Event ID
(6008) could not be found,” you may safely ignore it.
External SCSI Disk Drive
When you connect an external SCSI disk drive to your system, you may find that Windows NT
tries to boot from the external disk drive instead of from the system disk. If this happens, you must
change the boot order in the SCSI controller BIOS and then change the system disk drive letter.
To change the boot order in the SCSI controller BIOS:
1. Restart the system and, when prompted, press CTRL+Cto run the SCSI Configuration Utility.
2. Go to Adapter Boot Order and change the boot order of the adapters. Change the adapter with
boot order 0 to 1, and change the adapter with boot order 1 to 0.
3. Press
ESC to save the change and exit from the SCSI Configuration Utility.
The external disk drive will now be disk drive C and the internal system disk drive will have
another disk drive letter.
To change the system disk drive letter:
1. Go to Disk Administrator on the Administrative Tools program menu.
2. Select disk drive C (the external disk drive).
3. From the Tools menu, click Assign Drive Letter, and then assign a new disk drive letter to the
external disk drive.
4. If a dialog states the disk drive cannot be locked, click OK, and then click Commit Changes
Now from the Partition menu.
5. Exit from Disk Administrator. If required, restart the system to make the change take effect.
6. Log on to Windows NT and repeat steps 1 through 5, selecting the internal system disk drive
and assigning disk drive letter C to it. If another device is using disk drive letter C, you may
have to repeat these steps again.
4
If you reinstall Windows NT on your system, the external disk drive will be disk drive C and the
internal system disk drive will have another disk drive letter. You must install Windows NT on the
internal system disk drive, not on disk drive C (the external disk drive). After you complete
installation, you must change the system disk drive letter as described above. For more
information on changing disk drive letters, see Disk Administrator Help.
Adaptec Easy CD Creator
Easy CD Creator will not install properly if other programs are running in the background. Before
installing Easy CD Creator, go to Start » Settings » Control Panel » Devices and stop the
Shutdown, MGAQDesk, and MGAHook devices if they are running.
If a dialog displays that says “Drive x: Cannot read data” and xis the drive letter for your system’s
CD-ROM drive, you need to reinstall Easy CD Creator. To do this, remove Easy CD Creator from
the system, restart the system, and ensure the devices listed previously are not running. You can
then reinstall Easy CD Creator.
Setup and Memory Greater Than 3 GB
Because of a Windows NT 4.0 Setup limitation, you may encounter problems trying to install
Windows NT on a system with more than 3 GB of memory. If you reinstall Windows NT, you
must set the BIOS to limit memory reporting to 2 GB before starting installation. After completing
Setup, you can set the system’s BIOS to report all memory for use by Windows NT.
NOTE Installing Windows NT 4.0 Service Pack 4 or higher after completing Windows Setup
removes the need to limit memory use during Windows NT Setup.
To set the BIOS to limit or not limit memory reporting to Windows NT:
1. Restart the system and run the BIOS Setup program.
2. In the Main menu, go to Memory Cache » Memory Reported to the OS and press ENTER.
3. Select All Memory to enable reporting of all installed memory, or select Only 2 GB to limit
memory reporting to 2 GB, and press ENTER.
4. Save the change and exit from BIOS Setup.
During the boot process, you will be notified if memory reporting is restricted to 2 GB. Press F1 to
continue the boot process. See the System Board Manual for more information on running BIOS
Setup.
5
System Hardware
SCSI Controller
On a system with an Ultra3 SCSI controller (LSI 53C1010), Ultra2 and Ultra3 devices connected
to the controller operate at their respective transfer rates.
BIOS Setting for Default Video Controller
If your system has dual monitors, you can select which video controller is the boot display device
(used for VGA display).
To set the default video controller in the BIOS:
1. Restart the system and run the BIOS Setup program.
2. In the Advanced menu, go to PCI Configuration » AGP Device » Default Primary Video
Adapter and press ENTER.
3. Select the device you want to use and press ENTER.
4. Save the change and exit from BIOS Setup.
See the System Board Manual for more information on running BIOS Setup.
6
Copyright
2000 Intergraph Computer Systems. All rights reserved. This document contains information protected by copyright,
trade secret, and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means,
or be used to make any derivative work, without written consent from Intergraph Computer Systems.
Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subdivision
(c)(1)(ii) of the rights in technical data and computer software clause at DFARS 252.227-7013. Unpublished rights are
reserved under the copyright laws of the United States.
Intergraph Computer Systems, Huntsville AL 35894-0001
Notice
Information in this document is subject to change without notice and should not be considered a commitment by
Intergraph Computer Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or
omissions from, this document. Intergraph Computer Systems shall not be liable for incidental or consequential damages
resulting from the furnishing or use of this document.
All warranties given by Intergraph Computer Systems about equipment or software are set forth in your purchase contract.
Nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or
amendment of such warrantites.
Trademarks
Intergraphand the Intergraph logo are registered trademarks of Intergraph Corporation. Zxand Ultra-Towerare
trademarks of Intergraph Computer Systems. Inteland Pentiumregistered trademarks of Intel Corporation.
Microsoft, Windows, and Windows NTare registered trademarks of Microsoft Corporation. Other brands and
product names are trademarks of their respective owners.
Altri manuali per Zx10 Ultra-Tower
2
Indice
Altri manuali Intergraph Scrivania
Intergraph
Intergraph TDZ 2000 GL1 Guida utente
Intergraph
Intergraph TDZ-300 Manuale operativo
Intergraph
Intergraph TDZ 2000 GL1 Manuale utente
Intergraph
Intergraph TDZ 2000 GL2 Workstation Manuale utente
Intergraph
Intergraph Zx1 ViZual Workstation Manuale utente
Intergraph
Intergraph TD-x10 Setup Guida utente
Intergraph
Intergraph TD-x20 Setup Manuale utente
Intergraph
Intergraph TDZ 2000 GX1 Manuale utente
Intergraph
Intergraph TDZ 2000 GL1 Manuale utente
Intergraph
Intergraph ExtremeZ SAN Guida
Intergraph
Intergraph TDZ 2000/ExtremeZ Manuale utente
Intergraph
Intergraph TD-22x Manuale elenco delle parti
Intergraph
Intergraph TDZ 2000 GL2 Workstation Manuale utente
Intergraph
Intergraph Zx1 ViZual Workstation Manuale elenco delle parti
Intergraph
Intergraph TD-200 Targa 2000 Manuale utente
Intergraph
Intergraph TDZ 2000 GL2 Workstation Manuale utente
Intergraph
Intergraph TD-2x Manuale utente
Intergraph
Intergraph TDZ 2000 GT1 Manuale utente
Intergraph
Intergraph TDZ 2000 GL2 Workstation Guida utente
Intergraph
Intergraph TD-x20 Setup Guida utente
