Interlogix ZeroWire Manuale di istruzioni
ZeroWire Quick User Guide 1 / 4 P/N 466-2920 • REV B • ISS 21APR17
ZeroWire Quick User Guide
Key Colour Description
ALARM
Red System is in alarm. Enter your PIN
code then ENTER to turn off the
alarm. Press STATUS key for more
info.
STAY
Not lit System is disarmed if Away is also
not lit.
Green System is armed in the “STAY”
mode.
STATUS
Green System is ready to be armed.
Yellow System message present.
Red (steady) System trouble message present.
Touch the STATUS key to hear system messages. If
you are unable to fix the issue, contact your service
provider for help.
AWAY
Not lit System is disarmed if Stay is also
not lit.
Red System is armed in the “AWAY”
mode.
Not lit System cannot be armed, press
STATUS key for more info
Key Colour Description
READY
Green
(steady)
Your system is ready to arm in Away
or Stay mode.
Green
(flashing)
Zones are currently unsealed but
system is force-armable. If these
zones are not sealed by the end of
the exit time the system will go into
alarm.
BYPASS
Touch the BYPASS key to access the bypass menu
where you can bypass or un-bypass zones.
CHIME
Touch the CHIME key to access the chime menu
where you can select zones to make a chime sound
on the ZeroWire when they are tripped.
HISTORY
Press the HISTORY key to listen for alarm and event
history.
2 / 4 ZeroWire Quick User Guide
Displaying Status in a PD6662 system
In a PD6662 system the Status key behaviour has been
modified for greater security. It will be off or red, and not
announce system status when pressed.
To check system status and unlock the screen saver,
enter your PIN code followed by enter:
Enter your user PIN
code.
1.
STATUS
Select Status.
This action unlocks the
screen saver.
Arming in Away Mode
READY STATUS
Check ready key is
green.
Check status key is
green.
1.
AWAY
Select the Away Mode.
2.
3.
Leave the premises in
30 to 60 seconds (as
set by the installer).
4. Close the Final Set
Door.
Arming in Stay Mode
1.
STATUS
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors
outside your “stay
mode”, have everyone
leave those areas.
2.
STAY
Select the Stay Mode.
3.
4.
Stay within the
protected areas.
Arming in Instant Stay Mode
1.
STATUS
Green Flashing Green
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors outside
your “stay mode”, have
everyone leave those
areas.
2.
STAY
STAY
Select the Stay Mode
twice.
Or, press Stay button
once when system is
already in Stay Mode. In
this case, you will not be
asked second time for a
PIN code.
3.
4. Stay within the
protected areas.
5.
Final door becomes an
instant alarm zone.
Arming in Night Mode
1.
STATUS
Check status key is
green. Close all
protected doors and
windows. If you have
motion detectors outside
your “stay mode”, have
everyone leave those
areas.
2.
STAY
STAY
STAY
Select the Stay Mode
three times.
Or, press Stay button
once when system is
already in Instant Stay
Mode.
3.
4. Stay within the
protected areas.
5. Final door becomes an instant alarm zone.
Note: Subsequent presses of the Stay button loop through the
three Stay Mode states:
Stay Mode Stay Instant Mode Night Mode
STAY
STAY
STAY
Note: The 3
rd
Stay option will be available only if Engineer
configures Night mode.
USER PIN CODE
ENTER
USER PIN CODE
ENTER
EXIT DELAY BEEPS
USER PIN CODE
ENTER
EXIT DELAY BEEPS
USER PIN CODE
ENTER
EXIT DELAY BEEPS
USER PIN CODE
ENTER
EXIT DELAY BEEPS
ZeroWire Quick User Guide 3 / 4 P/N 466-2920 • REV B • ISS 21APR17
Disarming
1. Enter the premises through a designated entry/exit door.
2.
Approach the
ZeroWire. When you
are detected, the
entry warning timer
will begin and then
the ZeroWire will
beep.
3.
Enter your PIN code
before the entry
delay expires.
4. All zones are now disarmed, any bypassed zones are
restored to normal operation.
PD6662 Disarming
1. Enter the premises through a designated entry/exit door
2.
3.
OR
4.
All zones are now disarmed, any bypassed zones are
restored to normal operation.
A user shall use the Fob or the App to disarm the system.
Bypassing a Zone
1.
BYPASS
Select Bypass Menu.
2.
Enter PIN code with authority
to bypass.
3.;
Select a zone to bypass.
4.
Toggle between un-
bypassed to bypassed state.
5. Exit from Bypass Menu.
Displaying Status in a PD6662 System
In a PD6662 system, the behavior of indicators has been
modified for greater security. The ‘status’ key will be off or red
and will not announce system status when pressed.
To conform to PD6662 the system should have been installed
by the engineer as a ONE Area configuration.
1.
Enter a valid user PIN.
2.
STATUS
Select Status Key.
3.
Status condition(s) are
announced.
Acknowledging Alarms
1.
STATUS
Select Status Key.
2.
Status condition(s) are
announced.
3.
Enter a valid master
PIN.
4.
STATUS
Status Key will change
to green if no other
conditions are
present.
Note: Once a confirmed alarm has occurred, it requires an
Engineer to reset the system before it can be armed again.
Event History
1.
HISTORY
Select History Menu.
2.
Enter a valid master PIN.
3. Listen to history events.
4.
Touch ENTER for next
event.
Touch 0 for previous event.
5. Exit from History Menu.
Emergency Keys
ZeroWire has three (3) emergency keys: Medical, Police
(duress) and Fire.
In a PD6662 system, the emergency keys are disabled to
conform to the policy. They can however be used for other
purposes such as activation of scenes.
To cancel an emergency activation:
1.
Enter you code after an
emergency key has been
activated.
ENTRY DELAY BEEPS
USER PIN CODE ENTER
ENTRY DELAY BEEPS
USER FOB TO DISARM
USER APP TO DISARM
USER PIN CODE
ENTER
ZONE NUMBER
ENTER
0
MENU
USER PIN CODE
ENTER
STATUS ANNOUNCED
STATUS ANNOUNCED
USER PIN CODE
ENTER
USER PIN CODE
ENTER
2
MENU
MASTER PIN CODE
ENTER
4 / 4 ZeroWire Quick User Guide
Permitting Engineer access
1.
Enter PIN code.
2.; Press the Menu key.
3.
or
Select the option 8 or 9.
4.
Enter the Engineer code.
The Engineer can then program from the panel, and also has
access to connect via the smartphone/tablet app.
Changing a User PIN
1.
Selects User Configuration
menu.
2.
3. Selects configure user PIN.
4.
Select user number.
5.
Set user PIN code (e.g.
12345)
6.
Exits from Advanced system
configuration.
Note: Users must have unique PIN codes. If the new PIN code
you enter is the same as another user’s PIN code your
ZeroWire will announce "PIN code is occupied, select a new
user PIN code."
Main Menu
Touching the [MENU] key will give you access to main menu.
The Personal Voice Guide will prompt you through each menu
and announce what options are available.
There are 9 main features used for customizing your security
system. Some menus require a Master User PIN code to
access.
1. Volume Level
2. Backlight Level
3. User Configuration
4. System Test
5. Zone Configuration
6. Voice Message Recording
7. Detector Reset
8. Basic System Configuration
9. Advanced System Configuration
Using the UltraSync+ app
The first screen that will appear once you connect is
Arm/Disarm. Using the menu bar located along the bottom of
the app, you can program other ZeroWire settings −zones,
cameras, rooms (Z-Wave devices).
Master users will have access to the full Users menu for
creating and managing users.
When you login with the installer account, you will also have
access to additional menus for setting up and programming the
ZeroWire −Settings and Advanced.
Engineer Reset
Engineer reset required after confirmed Alarm or Panic.
To perform Engineer Reset:
• With screen saver on:
Customer Code> Enter followed by Engineer Code >
Enter.
• To perform a reset via the app:
Engineer logs into the UltraSync+ app then just presses the
Disarmed key on display.
Contact information
www.utcfireandsecurity.com
For customer support, see www.utcfssecurityproducts.eu
MASTER PIN CODE
ENTER
MENU
8
9
MASTER PIN CODE
ENTER
MENU 3
MASTER PIN CODE
ENTER
1
USER NUMBER
ENTER
1 2 3
4 5
ENTER
MENU MENU
MENU
Altri manuali per ZeroWire
4
Altri manuali Interlogix Sistema di sicurezza
Interlogix
Interlogix 600-6520-95 Manuale utente
Interlogix
Interlogix Simon XTi-5 Version 2 Manuale utente
Interlogix
Interlogix 60-578 Manuale utente
Interlogix
Interlogix TX-7211-05-1 Istruzioni per il montaggio
Interlogix
Interlogix xgen Istruzioni operative
Interlogix
Interlogix ACL800SUW-BSMF Manuale utente
Interlogix
Interlogix AS272 Istruzioni per il montaggio
Interlogix
Interlogix Simon XT Manuale utente
Interlogix
Interlogix Alliance system Manuale utente
Interlogix
Interlogix ZeroWire Manuale utente
Interlogix
Interlogix advisorone Manuale utente
Interlogix
Interlogix ATS125 Istruzioni operative
Interlogix
Interlogix UltraView UVC-6120-1 Manuale utente
Interlogix
Interlogix AS280 Istruzioni per il montaggio
Interlogix
Interlogix ZeroWire Manuale utente
Interlogix
Interlogix Simon XT Manuale utente
Interlogix
Interlogix Learn Mode Water Resistant Pendant Panic... Manuale utente
Interlogix
Interlogix DC107 Series Istruzioni per il montaggio
Interlogix
Interlogix Simon XTi-5 Version 2 Manuale utente
Interlogix
Interlogix Simon XTi-5 Version 2 Manuale utente
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente